Igt-dev Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
To: "Zbigniew Kempczyński" <zbigniew.kempczynski@intel.com>,
	igt-dev@lists.freedesktop.org
Cc: Petri Latvala <petri.latvala@intel.com>,
	Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Subject: Re: [igt-dev] [PATCH i-g-t] benchmarks/gem_userptr_benchmark: Remove tests with unsynchronized flag
Date: Wed, 26 May 2021 10:00:26 +0100	[thread overview]
Message-ID: <09a3cb87-a65e-b42c-771c-0ad2f8cf6f56@linux.intel.com> (raw)
In-Reply-To: <e4b22a23-421e-cc77-fd0a-5a1b4354c206@linux.intel.com>


On 26/05/2021 09:56, Tvrtko Ursulin wrote:
> 
> On 21/05/2021 17:46, Zbigniew Kempczyński wrote:
>> As flag I915_USERPTR_UNSYNCHRONIZED is not supported by the i915 anymore
>> remove tests which tries to use it in the benchmark.
>>
>> Remove benchmark from meson libdrm depending code as it is a little bit
>> confusing.
>>
>> Signed-off-by: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com>
>> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
>> Cc: Petri Latvala <petri.latvala@intel.com>
> 
> Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin.com>

Regards,

Tvrtko

> Regards,
> 
> Tvrtko
> 
>> ---
>>   benchmarks/gem_userptr_benchmark.c | 54 +++++++-----------------------
>>   benchmarks/meson.build             |  2 +-
>>   2 files changed, 14 insertions(+), 42 deletions(-)
>>
>> diff --git a/benchmarks/gem_userptr_benchmark.c 
>> b/benchmarks/gem_userptr_benchmark.c
>> index d7a495209..a85997b86 100644
>> --- a/benchmarks/gem_userptr_benchmark.c
>> +++ b/benchmarks/gem_userptr_benchmark.c
>> @@ -57,20 +57,10 @@
>>     #define PAGE_SIZE 4096
>>   #endif
>> -static uint32_t userptr_flags = I915_USERPTR_UNSYNCHRONIZED;
>> +static uint32_t userptr_flags = 0;
>>   #define BO_SIZE (65536)
>> -static void gem_userptr_test_unsynchronized(void)
>> -{
>> -    userptr_flags = I915_USERPTR_UNSYNCHRONIZED;
>> -}
>> -
>> -static void gem_userptr_test_synchronized(void)
>> -{
>> -    userptr_flags = 0;
>> -}
>> -
>>   static void **handle_ptr_map;
>>   static unsigned int num_handle_ptr_map;
>> @@ -124,14 +114,10 @@ static int has_userptr(int fd)
>>   {
>>       uint32_t handle = 0;
>>       void *ptr;
>> -    uint32_t oldflags;
>>       int ret;
>>       assert(posix_memalign(&ptr, PAGE_SIZE, PAGE_SIZE) == 0);
>> -    oldflags = userptr_flags;
>> -    gem_userptr_test_unsynchronized();
>> -    ret = __gem_userptr(fd, ptr, PAGE_SIZE, 0, userptr_flags, &handle);
>> -    userptr_flags = oldflags;
>> +    ret = __gem_userptr(fd, ptr, PAGE_SIZE, 0, 0, &handle);
>>       if (ret != 0) {
>>           free(ptr);
>>           return 0;
>> @@ -464,32 +450,18 @@ static void test_userptr(int fd)
>>       test_multiple(fd, 100, 1);
>>   }
>> -int main(int argc, char **argv)
>> +igt_main
>>   {
>>       int fd = -1, ret;
>> -    igt_subtest_init(argc, argv);
>> -
>> -    fd = drm_open_driver(DRIVER_INTEL);
>> -    igt_assert(fd >= 0);
>> -
>> -    ret = has_userptr(fd);
>> -    igt_skip_on_f(ret == 0, "No userptr support - %s (%d)\n",
>> -            strerror(errno), ret);
>> -
>> +    igt_fixture {
>> +        fd = drm_open_driver(DRIVER_INTEL);
>> +        igt_assert(fd >= 0);
>> -    gem_userptr_test_unsynchronized();
>> -
>> -    igt_subtest("userptr-unsync")
>> -        test_userptr(fd);
>> -
>> -    igt_subtest("userptr-impact-unsync")
>> -        test_impact(fd, "unsync-");
>> -
>> -    igt_subtest("userptr-impact-unsync-overlap")
>> -        test_impact_overlap(fd, "unsync-");
>> -
>> -    gem_userptr_test_synchronized();
>> +        ret = has_userptr(fd);
>> +        igt_skip_on_f(ret == 0, "No userptr support - %s (%d)\n",
>> +                  strerror(errno), ret);
>> +    }
>>       igt_subtest("userptr-sync")
>>           test_userptr(fd);
>> @@ -500,7 +472,7 @@ int main(int argc, char **argv)
>>       igt_subtest("userptr-impact-sync-overlap")
>>           test_impact_overlap(fd, "sync-");
>> -    igt_exit();
>> -
>> -    return 0;
>> +    igt_fixture {
>> +        close(fd);
>> +    }
>>   }
>> diff --git a/benchmarks/meson.build b/benchmarks/meson.build
>> index bede51dce..98a08e25c 100644
>> --- a/benchmarks/meson.build
>> +++ b/benchmarks/meson.build
>> @@ -11,6 +11,7 @@ benchmark_progs = [
>>       'gem_prw',
>>       'gem_set_domain',
>>       'gem_syslatency',
>> +    'gem_userptr_benchmark',
>>       'gem_wsim',
>>       'kms_vblank',
>>       'prime_lookup',
>> @@ -23,7 +24,6 @@ if libdrm_intel.found()
>>           'intel_upload_blit_large_gtt',
>>           'intel_upload_blit_large_map',
>>           'intel_upload_blit_small',
>> -        'gem_userptr_benchmark',
>>       ]
>>   endif
>>
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev

      reply	other threads:[~2021-05-26  9:00 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-21 16:46 [igt-dev] [PATCH i-g-t] benchmarks/gem_userptr_benchmark: Remove tests with unsynchronized flag Zbigniew Kempczyński
2021-05-21 17:36 ` [igt-dev] ✓ Fi.CI.BAT: success for " Patchwork
2021-05-24  0:56 ` [igt-dev] ✓ Fi.CI.IGT: " Patchwork
2021-05-26  8:56 ` [igt-dev] [PATCH i-g-t] " Tvrtko Ursulin
2021-05-26  9:00   ` Tvrtko Ursulin [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=09a3cb87-a65e-b42c-771c-0ad2f8cf6f56@linux.intel.com \
    --to=tvrtko.ursulin@linux.intel.com \
    --cc=igt-dev@lists.freedesktop.org \
    --cc=petri.latvala@intel.com \
    --cc=tvrtko.ursulin@intel.com \
    --cc=zbigniew.kempczynski@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox