From: Paulo Zanoni <paulo.r.zanoni@intel.com>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
"igt-dev@lists.freedesktop.org" <igt-dev@lists.freedesktop.org>
Subject: Re: [igt-dev] [PATCH i-g-t v3 4/4] tests/kms_frontbuffer_tracking: Remove redundant modesets during subtest start.
Date: Thu, 05 Apr 2018 09:31:02 -0700 [thread overview]
Message-ID: <1522945862.2748.4.camel@intel.com> (raw)
In-Reply-To: <1521661661.3150.13.camel@intel.com>
Em Qua, 2018-03-21 às 12:47 -0700, Paulo Zanoni escreveu:
> Em Qui, 2018-03-01 às 16:33 +0100, Maarten Lankhorst escreveu:
> > Hey,
> >
> > Op 27-02-18 om 09:52 schreef Maarten Lankhorst:
> > > CRC capturing enables the display, then disables it again. With
> > > igt_display we can use igt_display_reset to restore the original
> > > state,
> > > without committing it to the hw.
> > >
> > > All subtests first set their own state anyway, so we can save up
> > > on
> > > the number of commits.
> >
> > I patched igt_kms to report the number of modesets..
> >
> > Without this patch running ./kms_frontbuffer_tracking on a 2 output
> > system (f2-snb-2600, forced VGA-1 enabled):
> > Performed 382 modesets
> >
> > With this patch on a 2 output system:
> > Performed 23 modesets
> >
> > On geminilake this means we save a lot of time, so could someone
> > review this series?
>
> Is there an analysis on how reducing the amount of modesets will
> *not*
> invalidade the purpose of the tests? The modesets are there for a
> reason.
Ping?
>
> >
> > Also for comparison, single output enabled, fbc-1p-rte:
> > Unpatched:
> > Performed 4 modesets
> >
> > Patched:
> > Performed 2 modesets
> >
> > Hack below:
> >
> > ---8<---
> > diff --git a/lib/igt_kms.c b/lib/igt_kms.c
> > index 2d57369fe558..dfefe1f887ec 100644
> > --- a/lib/igt_kms.c
> > +++ b/lib/igt_kms.c
> > @@ -2154,6 +2154,8 @@ void igt_display_fini(igt_display_t *display)
> > {
> > int i;
> >
> > + igt_info("Performed %u modesets\n", display->modesets);
> > +
> > for (i = 0; i < display->n_pipes; i++)
> > igt_pipe_fini(&display->pipes[i]);
> >
> > @@ -3196,8 +3198,23 @@ static int do_display_commit(igt_display_t
> > *display,
> > igt_display_refresh(display);
> >
> > if (s == COMMIT_ATOMIC) {
> > - ret = igt_atomic_commit(display,
> > DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
> > + ret = igt_atomic_commit(display, 0, NULL);
> > +
> > + if (ret == -EINVAL) {
> > + ret = igt_atomic_commit(display,
> > DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
> > + if (!ret)
> > + display->modesets++;
> > + }
> > +
> > } else {
> > + ret = igt_atomic_commit(display,
> > DRM_MODE_ATOMIC_TEST_ONLY, NULL);
> > + if (ret == -EINVAL) {
> > + ret = igt_atomic_commit(display,
> > DRM_MODE_ATOMIC_TEST_ONLY | DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
> > + if (!ret)
> > + display->modesets++;
> > + ret = 0;
> > + }
> > +
> > for_each_pipe(display, pipe) {
> > igt_pipe_t *pipe_obj = &display-
> > > pipes[pipe];
> >
> >
> > diff --git a/lib/igt_kms.h b/lib/igt_kms.h
> > index f27e22088ce2..718ea8ce0497 100644
> > --- a/lib/igt_kms.h
> > +++ b/lib/igt_kms.h
> > @@ -357,6 +357,7 @@ struct igt_display {
> > bool has_cursor_plane;
> > bool is_atomic;
> > bool first_commit;
> > + int modesets;
> > };
> >
> > void igt_display_init(igt_display_t *display, int drm_fd);
> >
> > _______________________________________________
> > igt-dev mailing list
> > igt-dev@lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/igt-dev
>
> _______________________________________________
> igt-dev mailing list
> igt-dev@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/igt-dev
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev
next prev parent reply other threads:[~2018-04-05 16:31 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-27 8:52 [igt-dev] [PATCH i-g-t v3 0/4] kms_panel_fitting and kms_frontbuffer_tracking cleanups Maarten Lankhorst
2018-02-27 8:52 ` [igt-dev] [PATCH i-g-t v3 1/4] tests/kms_panel_fitting: Test cleanups Maarten Lankhorst
2018-03-05 13:45 ` Arkadiusz Hiler
2018-02-27 8:52 ` [igt-dev] [PATCH i-g-t v3 2/4] lib/igt_kms: Fix igt_plane_reset to handle cursor planes correctly too Maarten Lankhorst
2018-03-05 13:48 ` Arkadiusz Hiler
2018-02-27 8:52 ` [igt-dev] [PATCH i-g-t v3 3/4] tests/kms_frontbuffer_tracking: Convert test to use igt_display, v3 Maarten Lankhorst
2018-03-07 15:17 ` Arkadiusz Hiler
2018-03-07 15:26 ` Arkadiusz Hiler
2018-03-07 16:40 ` Maarten Lankhorst
2018-03-08 8:57 ` Arkadiusz Hiler
2018-03-12 13:09 ` Maarten Lankhorst
2018-02-27 8:52 ` [igt-dev] [PATCH i-g-t v3 4/4] tests/kms_frontbuffer_tracking: Remove redundant modesets during subtest start Maarten Lankhorst
2018-03-01 15:33 ` Maarten Lankhorst
2018-03-21 19:47 ` Paulo Zanoni
2018-04-05 16:31 ` Paulo Zanoni [this message]
2018-04-05 19:21 ` Maarten Lankhorst
2018-04-05 19:30 ` Paulo Zanoni
2018-04-05 19:44 ` Daniel Vetter
2018-02-27 9:15 ` [igt-dev] ✓ Fi.CI.BAT: success for kms_panel_fitting and kms_frontbuffer_tracking cleanups. (rev3) Patchwork
2018-02-27 10:00 ` [igt-dev] ✓ Fi.CI.IGT: " Patchwork
2018-03-06 11:21 ` [igt-dev] ✓ Fi.CI.BAT: " Patchwork
2018-03-06 15:21 ` [igt-dev] ✗ Fi.CI.IGT: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1522945862.2748.4.camel@intel.com \
--to=paulo.r.zanoni@intel.com \
--cc=igt-dev@lists.freedesktop.org \
--cc=maarten.lankhorst@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox