From: Jeevan B <jeevan.b@intel.com>
To: igt-dev@lists.freedesktop.org
Cc: Jeevan B <jeevan.b@intel.com>
Subject: [igt-dev] [PATCH i-g-t 1/3] igt/i915/i915_pm_dc: DC3CO PSR2 helpers
Date: Thu, 3 Oct 2019 13:15:07 +0530 [thread overview]
Message-ID: <1570088709-3605-2-git-send-email-jeevan.b@intel.com> (raw)
In-Reply-To: <1570088709-3605-1-git-send-email-jeevan.b@intel.com>
From: Anshuman Gupta <anshuman.gupta@intel.com>
Add DC3CO IGT validation prerequisites stuff
so we can enable DC3CO IGT test.
v2: Removed psr2_idle_wait_entry and get_psr2_status function.
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Jeevan B <jeevan.b@intel.com>
---
tests/i915/i915_pm_dc.c | 34 +++++++++++++++++++++++++++++-----
1 file changed, 29 insertions(+), 5 deletions(-)
diff --git a/tests/i915/i915_pm_dc.c b/tests/i915/i915_pm_dc.c
index ce3319b..19d8a78 100644
--- a/tests/i915/i915_pm_dc.c
+++ b/tests/i915/i915_pm_dc.c
@@ -36,6 +36,7 @@
/* DC State Flags */
#define CHECK_DC5 1
#define CHECK_DC6 2
+#define CHECK_DC3CO 4
typedef struct {
int drm_fd;
@@ -88,6 +89,20 @@ static bool edp_psr_sink_support(data_t *data)
return strstr(buf, "Sink support: yes");
}
+static bool edp_psr2_enabled(data_t *data)
+
+{
+ char buf[512];
+
+ igt_debugfs_simple_read(data->debugfs_fd, "i915_edp_psr_status",
+ buf, sizeof(buf));
+
+ if (data->op_psr_mode == PSR_MODE_2)
+ return strstr(buf, "PSR mode: PSR2 enabled");
+
+ return false;
+}
+
static void cleanup_dc_psr(data_t *data)
{
igt_plane_t *primary;
@@ -141,12 +156,18 @@ static uint32_t read_dc_counter(uint32_t drm_fd, int dc_flag)
str = strstr(buf, "DC3 -> DC5 count");
else if (dc_flag & CHECK_DC6)
str = strstr(buf, "DC5 -> DC6 count");
+ else if (dc_flag & CHECK_DC3CO)
+ str = strstr(buf, "DC3CO count");
- /* Check DC5/DC6 counter is available for the platform.
+ /* Check DC counter is available for the platform.
* Skip the test if counter is not available.
*/
- igt_skip_on_f(!str, "DC%d counter is not available\n",
- dc_flag & CHECK_DC5 ? 5 : 6);
+ if (dc_flag & CHECK_DC3CO)
+ igt_skip_on_f(!str, "DC3CO counter is not available\n");
+ else
+ igt_skip_on_f(!str, "DC%d counter is not available\n",
+ dc_flag & CHECK_DC5 ? 5 : 6);
+
return get_dc_counter(str);
}
@@ -158,9 +179,12 @@ static bool dc_state_wait_entry(int drm_fd, int dc_flag, int prev_dc_count)
static void check_dc_counter(int drm_fd, int dc_flag, uint32_t prev_dc_count)
{
+ char tmp[64];
+
+ snprintf(tmp, sizeof(tmp), "%s", dc_flag & CHECK_DC3CO ? "DC3CO" :
+ (dc_flag & CHECK_DC5 ? "DC5" : "DC6"));
igt_assert_f(dc_state_wait_entry(drm_fd, dc_flag, prev_dc_count),
- "DC%d state is not achieved\n",
- dc_flag & CHECK_DC5 ? 5 : 6);
+ "%s state is not achieved\n", tmp);
}
static void test_dc_state_psr(data_t *data, int dc_flag)
--
2.7.4
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev
next prev parent reply other threads:[~2019-10-03 7:46 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-03 7:45 [igt-dev] [PATCH i-g-t 0/3] Add a new IGT test to validate DC3CO state Jeevan B
2019-10-03 7:45 ` Jeevan B [this message]
2019-10-04 12:43 ` [igt-dev] [PATCH i-g-t 1/3] igt/i915/i915_pm_dc: DC3CO PSR2 helpers Animesh Manna
2019-10-03 7:45 ` [igt-dev] [PATCH i-g-t 2/3] Add a new IGT test to validate DC3CO state Jeevan B
2019-10-03 11:25 ` Anshuman Gupta
2019-10-03 14:50 ` Arkadiusz Hiler
2019-10-04 10:39 ` Jeevan B
2019-10-04 13:59 ` Arkadiusz Hiler
2019-10-07 13:48 ` Imre Deak
2019-10-03 7:45 ` [igt-dev] [PATCH i-g-t 3/3] HAX: Run igt@i915_pm_dc@dc3co-vpb-simulation in BAT Jeevan B
2019-10-03 9:24 ` [igt-dev] ✓ Fi.CI.BAT: success for Add a new IGT test to validate DC3CO state. (rev4) Patchwork
2019-10-03 15:56 ` [igt-dev] ✗ Fi.CI.IGT: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1570088709-3605-2-git-send-email-jeevan.b@intel.com \
--to=jeevan.b@intel.com \
--cc=igt-dev@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox