From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: "Lofstedt, Marta" <marta.lofstedt@intel.com>
Cc: "igt-dev@lists.freedesktop.org" <igt-dev@lists.freedesktop.org>,
Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Subject: Re: [igt-dev] [PATCH i-g-t 2/2] tests/kms_ccs: Don't skip the entire subtest if one plane can't do CCS
Date: Fri, 9 Feb 2018 22:43:05 +0200 [thread overview]
Message-ID: <20180209204305.GO5453@intel.com> (raw)
In-Reply-To: <CA5F6A4B62957246A95956419746064382B2C6BC@IRSMSX106.ger.corp.intel.com>
On Wed, Feb 07, 2018 at 02:15:43PM +0000, Lofstedt, Marta wrote:
> Sorry Ville I didn't realize that you had a new patch on this bug.
>
> Reviewed-by: Marta Lofstedt<marta.lofstedt@intel.com>
Thanks. Series pushed to master.
>
> > -----Original Message-----
> > From: igt-dev [mailto:igt-dev-bounces@lists.freedesktop.org] On Behalf Of
> > Ville Syrjala
> > Sent: Friday, January 26, 2018 9:51 PM
> > To: igt-dev@lists.freedesktop.org
> > Cc: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
> > Subject: [igt-dev] [PATCH i-g-t 2/2] tests/kms_ccs: Don't skip the entire
> > subtest if one plane can't do CCS
> >
> > From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> >
> > Make sure we test every plane on the pipe, and only report a SKIP if none of
> > the planes support CCS (or the pixel format).
> >
> > Cc: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
> > Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104724
> > Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > ---
> > tests/kms_ccs.c | 67 +++++++++++++++++++++++++++++++------------------
> > --------
> > 1 file changed, 37 insertions(+), 30 deletions(-)
> >
> > diff --git a/tests/kms_ccs.c b/tests/kms_ccs.c index
> > b142d3e5a7cb..63298f137abb 100644
> > --- a/tests/kms_ccs.c
> > +++ b/tests/kms_ccs.c
> > @@ -130,7 +130,7 @@ modifiers_ptr(struct
> > local_drm_format_modifier_blob *blob)
> > return (struct local_drm_format_modifier *)(((char *)blob) +
> > blob->modifiers_offset); }
> >
> > -static void plane_require_ccs(data_t *data, igt_plane_t *plane, uint32_t
> > format)
> > +static bool plane_has_format_with_ccs(data_t *data, igt_plane_t *plane,
> > +uint32_t format)
> > {
> > drmModePropertyBlobPtr blob;
> > struct local_drm_format_modifier_blob *blob_data; @@ -
> > 161,8 +161,8 @@ static void plane_require_ccs(data_t *data, igt_plane_t
> > *plane, uint32_t format)
> > }
> > }
> >
> > - igt_skip_on_f(fmt_idx == -1,
> > - "Format 0x%x not supported by plane\n",
> > format);
> > + if (fmt_idx == -1)
> > + return false;
> >
> > modifiers = modifiers_ptr(blob_data);
> > last_mod = &modifiers[blob_data->count_modifiers];
> > @@ -177,12 +177,10 @@ static void plane_require_ccs(data_t *data,
> > igt_plane_t *plane, uint32_t format)
> >
> > if (modifiers[i].formats &
> > (1UL << (fmt_idx - modifiers[i].offset)))
> > - return;
> > -
> > - igt_skip("i915 CCS modifier not supported for
> > format\n");
> > + return true;
> > }
> >
> > - igt_skip("i915 CCS modifier not supported by kernel for
> > plane\n");
> > + return false;
> > }
> >
> > static void render_fb(data_t *data, uint32_t gem_handle, unsigned int size,
> > @@ -385,7 +383,7 @@ static void generate_fb(data_t *data, struct igt_fb
> > *fb,
> > fb->domain = 0;
> > }
> >
> > -static void try_config(data_t *data, enum test_fb_flags fb_flags,
> > +static bool try_config(data_t *data, enum test_fb_flags fb_flags,
> > igt_crc_t *crc)
> > {
> > igt_display_t *display = &data->display; @@ -402,10 +400,12
> > @@ static void try_config(data_t *data, enum test_fb_flags fb_flags,
> >
> > primary = igt_output_get_plane_type(data->output,
> >
> > DRM_PLANE_TYPE_PRIMARY);
> > - plane_require_ccs(data, primary, DRM_FORMAT_XRGB8888);
> > + if (!plane_has_format_with_ccs(data, primary,
> > DRM_FORMAT_XRGB8888))
> > + return false;
> >
> > if (data->plane && fb_flags & FB_COMPRESSED) {
> > - plane_require_ccs(data, data->plane,
> > DRM_FORMAT_XRGB8888);
> > + if (!plane_has_format_with_ccs(data, data-
> > >plane, DRM_FORMAT_XRGB8888))
> > + return false;
> > generate_fb(data, &fb, drm_mode->hdisplay,
> > drm_mode->vdisplay,
> > (fb_flags & ~FB_COMPRESSED)
> > | FB_HAS_PLANE); @@ -416,7 +416,7 @@ static void try_config(data_t
> > *data, enum test_fb_flags fb_flags,
> > }
> >
> > if (data->flags & TEST_FAIL_ON_ADDFB2)
> > - return;
> > + return true;
> >
> > igt_plane_set_position(primary, 0, 0);
> > igt_plane_set_size(primary, drm_mode->hdisplay,
> > drm_mode->vdisplay); @@ -458,13 +458,16 @@ static void try_config(data_t
> > *data, enum test_fb_flags fb_flags,
> >
> > if (data->flags & TEST_CRC)
> > igt_remove_fb(data->drm_fd, &fb);
> > +
> > + return true;
> > }
> >
> > -static void test_output(data_t *data)
> > +static int test_output(data_t *data)
> > {
> > igt_display_t *display = &data->display;
> > igt_crc_t crc, ref_crc;
> > enum test_fb_flags fb_flags = 0;
> > + int valid_tests = 0;
> >
> > igt_display_require_output_on_pipe(display, data->pipe);
> >
> > @@ -478,10 +481,11 @@ static void test_output(data_t *data)
> > if (data->flags & TEST_CRC) {
> > data->pipe_crc = igt_pipe_crc_new(data-
> > >drm_fd, data->pipe, INTEL_PIPE_CRC_SOURCE_AUTO);
> >
> > - try_config(data, fb_flags | FB_COMPRESSED,
> > &ref_crc);
> > - try_config(data, fb_flags, &crc);
> > -
> > - igt_assert_crc_equal(&crc, &ref_crc);
> > + if (try_config(data, fb_flags | FB_COMPRESSED,
> > &ref_crc) &&
> > + try_config(data, fb_flags, &crc)) {
> > + igt_assert_crc_equal(&crc,
> > &ref_crc);
> > + valid_tests++;
> > + }
> >
> > igt_pipe_crc_free(data->pipe_crc);
> > data->pipe_crc = NULL;
> > @@ -491,17 +495,19 @@ static void test_output(data_t *data)
> > data->flags & TEST_BAD_ROTATION_90 ||
> > data->flags & TEST_NO_AUX_BUFFER ||
> > data->flags & TEST_BAD_CCS_HANDLE) {
> > - try_config(data, fb_flags | FB_COMPRESSED,
> > NULL);
> > + valid_tests += try_config(data, fb_flags |
> > FB_COMPRESSED, NULL);
> > }
> >
> > if (data->flags & TEST_BAD_AUX_STRIDE) {
> > - try_config(data, fb_flags | FB_COMPRESSED |
> > FB_MISALIGN_AUX_STRIDE , NULL);
> > - try_config(data, fb_flags | FB_COMPRESSED |
> > FB_SMALL_AUX_STRIDE , NULL);
> > - try_config(data, fb_flags | FB_COMPRESSED |
> > FB_ZERO_AUX_STRIDE , NULL);
> > + valid_tests += try_config(data, fb_flags |
> > FB_COMPRESSED | FB_MISALIGN_AUX_STRIDE , NULL);
> > + valid_tests += try_config(data, fb_flags |
> > FB_COMPRESSED | FB_SMALL_AUX_STRIDE , NULL);
> > + valid_tests += try_config(data, fb_flags |
> > FB_COMPRESSED |
> > +FB_ZERO_AUX_STRIDE , NULL);
> > }
> >
> > igt_output_set_pipe(data->output, PIPE_ANY);
> > igt_display_commit2(display, display->is_atomic ?
> > COMMIT_ATOMIC : COMMIT_LEGACY);
> > +
> > + return valid_tests;
> > }
> >
> > static data_t data;
> > @@ -522,52 +528,53 @@ igt_main
> >
> > for_each_pipe_static(pipe) {
> > const char *pipe_name =
> > kmstest_pipe_name(pipe);
> > - int sprite_idx = 0;
> >
> > data.pipe = pipe;
> >
> > data.flags = TEST_BAD_PIXEL_FORMAT;
> > igt_subtest_f("pipe-%s-bad-pixel-format",
> > pipe_name)
> > - test_output(&data);
> > + igt_require(test_output(&data));
> >
> > data.flags = TEST_BAD_ROTATION_90;
> > igt_subtest_f("pipe-%s-bad-rotation-90",
> > pipe_name)
> > - test_output(&data);
> > + igt_require(test_output(&data));
> >
> > data.flags = TEST_CRC;
> > igt_subtest_f("pipe-%s-crc-primary-basic",
> > pipe_name)
> > - test_output(&data);
> > + igt_require(test_output(&data));
> >
> > data.flags = TEST_CRC | TEST_ROTATE_180;
> > igt_subtest_f("pipe-%s-crc-primary-rotation-
> > 180", pipe_name)
> > - test_output(&data);
> > + igt_require(test_output(&data));
> >
> > data.flags = TEST_CRC;
> > igt_subtest_f("pipe-%s-crc-sprite-planes-basic",
> > pipe_name) {
> > + int valid_tests = 0;
> >
> >
> > igt_display_require_output_on_pipe(&data.display,
> > data.pipe);
> >
> >
> > for_each_plane_on_pipe(&data.display, data.pipe,
> > data.plane) {
> > if (data.plane->type
> > == DRM_PLANE_TYPE_PRIMARY)
> >
> > continue;
> > - sprite_idx++;
> > -
> > test_output(&data);
> > + valid_tests +=
> > test_output(&data);
> > }
> > +
> > + igt_require(valid_tests);
> > }
> >
> > data.plane = NULL;
> >
> > data.flags = TEST_NO_AUX_BUFFER;
> > igt_subtest_f("pipe-%s-missing-ccs-buffer",
> > pipe_name)
> > - test_output(&data);
> > + igt_require(test_output(&data));
> >
> > data.flags = TEST_BAD_CCS_HANDLE;
> > igt_subtest_f("pipe-%s-ccs-on-another-bo",
> > pipe_name)
> > - test_output(&data);
> > + igt_require(test_output(&data));
> >
> > data.flags = TEST_BAD_AUX_STRIDE;
> > igt_subtest_f("pipe-%s-bad-aux-stride",
> > pipe_name)
> > - test_output(&data);
> > + igt_require(test_output(&data));
> > }
> >
> > igt_fixture
> > --
> > 2.13.6
> >
> > _______________________________________________
> > igt-dev mailing list
> > igt-dev@lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/igt-dev
--
Ville Syrjälä
Intel OTC
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev
next prev parent reply other threads:[~2018-02-09 20:43 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-26 19:51 [igt-dev] [PATCH i-g-t 1/2] tests/kms_ccs: Move fbs out from data Ville Syrjala
2018-01-26 19:51 ` [igt-dev] [PATCH i-g-t 2/2] tests/kms_ccs: Don't skip the entire subtest if one plane can't do CCS Ville Syrjala
2018-02-07 14:15 ` Lofstedt, Marta
2018-02-09 20:43 ` Ville Syrjälä [this message]
2018-01-26 20:11 ` [igt-dev] ✓ Fi.CI.BAT: success for series starting with [i-g-t,1/2] tests/kms_ccs: Move fbs out from data Patchwork
2018-01-26 21:10 ` [igt-dev] ✗ Fi.CI.IGT: failure " Patchwork
2018-02-07 14:15 ` [igt-dev] [PATCH i-g-t 1/2] " Lofstedt, Marta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180209204305.GO5453@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=igt-dev@lists.freedesktop.org \
--cc=krisman@collabora.co.uk \
--cc=marta.lofstedt@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox