From: Petri Latvala <petri.latvala@intel.com>
To: igt-dev@lists.freedesktop.org
Subject: [igt-dev] [RFC PATCH v3 4/5] igt/core: Initial simple interleaved kmsg filtering
Date: Tue, 20 Feb 2018 13:30:41 +0200 [thread overview]
Message-ID: <20180220113041.18520-1-petri.latvala@intel.com> (raw)
In-Reply-To: <20180118142722.18755-1-daniel.vetter@ffwll.ch>
From: Daniel Vetter <daniel.vetter@ffwll.ch>
Needs to be beefed up so that dmesg warning (and worse) are re-emmitted
as IGT_LOG_WARN. But only if they match one of our filters (which we
should probably allow to be extended, e.g. depending upon which driver
has been openened). This also requires that we at least parse the
basic of kmsg lines (adjusting the timestamp to match our own would be
real cool).
v2:
- Seek to the end of the kmsg buffer before starting the capturing.
- Increase linebuffer to avoid dmesg drowning out all the tests
messages.
v3: Unlazy slightly and implement semi-correct kmsg parsing.
v4 (Petri): Handle continuation lines instead of crashing on them
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Petri Latvala <petri.latvala@intel.com>
---
lib/igt_core.c | 65 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 64 insertions(+), 1 deletion(-)
diff --git a/lib/igt_core.c b/lib/igt_core.c
index aaafc1df..27686276 100644
--- a/lib/igt_core.c
+++ b/lib/igt_core.c
@@ -293,7 +293,7 @@ static const char *command_str;
static char* igt_debug_log_domain_filter;
static struct {
- char *entries[256];
+ char *entries[2000];
uint8_t start, end;
} log_buffer;
static pthread_mutex_t log_buffer_mutex = PTHREAD_MUTEX_INITIALIZER;
@@ -581,6 +581,67 @@ static void oom_adjust_for_doom(void)
}
+static void *kmsg_capture(void *arg)
+{
+ int kmsg_capture_fd = (uintptr_t) arg;
+ FILE *kmsg_file = fdopen(kmsg_capture_fd, "r");
+ char *line = NULL;
+ size_t line_len = 0;
+ ssize_t read;
+
+ while ((read = getline(&line, &line_len, kmsg_file))) {
+ int s;
+ unsigned flags;
+ unsigned long long seq, ts_usec;
+ char continuation;
+ enum igt_log_level level;
+
+ s = sscanf(line, "%u,%llu,%llu,%c;", &flags,
+ &seq, &ts_usec, &continuation);
+
+ if (s == 4) {
+ if ((flags & 0x7) <= 4)
+ level = IGT_LOG_WARN;
+ else
+ level = IGT_LOG_DEBUG;
+
+ igt_log("dmesg", level, "[%llu.%06llu], %s",
+ ts_usec / 1000000,
+ ts_usec % 1000000,
+ index(line, ';') + 1);
+ } else if (line[0] == ' ') {
+ /* continuation line; ignore */
+ } else {
+ igt_warn("Cannot parse kmsg line: %s\n", line);
+ }
+ }
+
+ igt_warn("ran out of dmesg, this shouldn't happen\n");
+
+ free(line);
+ fclose(kmsg_file);
+ return NULL;
+}
+
+static void start_kmsg_recording(void)
+{
+ static pthread_t kmsg_capture_thread;
+ int kmsg_capture_fd;
+
+ kmsg_capture_fd = open("/dev/kmsg",
+ O_RDONLY | O_CLOEXEC);
+
+ if (kmsg_capture_fd < 0) {
+ igt_info("no dmesg capturing\n");
+ return;
+ }
+
+ lseek(kmsg_capture_fd, 0, SEEK_END);
+
+ pthread_create(&kmsg_capture_thread, NULL,
+ kmsg_capture, (void *)(uintptr_t) kmsg_capture_fd);
+}
+
#ifdef HAVE_GLIB
static void common_init_config(void)
{
@@ -814,6 +875,8 @@ out:
kmsg(KERN_INFO "[IGT] %s: executing\n", command_str);
print_version();
+ start_kmsg_recording();
+
sync();
oom_adjust_for_doom();
ftrace_dump_on_oops(true);
--
2.11.0
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev
next prev parent reply other threads:[~2018-02-20 11:30 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-18 13:59 [igt-dev] [RFC PATCH 1/5] tests/sw_sync: use igt_fork_helper Daniel Vetter
2018-01-18 13:59 ` [igt-dev] [RFC PATCH 2/5] lib/core: make logging pthread vs. fork safe Daniel Vetter
2018-01-18 13:59 ` [igt-dev] [RFC PATCH 3/5] lib/core: Don't hide non-debug message when filtering for a debug log domain Daniel Vetter
2018-01-18 13:59 ` [igt-dev] [RFC PATCH 4/5] igt/core: Initial simple interleaved kmsg filtering Daniel Vetter
2018-01-18 14:27 ` [igt-dev] [RFC PATCH] " Daniel Vetter
2018-02-20 11:30 ` Petri Latvala [this message]
2018-02-20 11:50 ` [igt-dev] [RFC PATCH v3 4/5] " Daniel Vetter
2018-02-20 12:09 ` Daniel Vetter
2018-01-18 13:59 ` [igt-dev] [RFC PATCH 5/5] lib/core: report subtests that hit an igt_warning as WARNING Daniel Vetter
2018-01-18 14:21 ` [igt-dev] ✓ Fi.CI.BAT: success for series starting with [RFC,1/5] tests/sw_sync: use igt_fork_helper Patchwork
2018-01-18 15:05 ` [igt-dev] ✗ Fi.CI.BAT: failure for series starting with [RFC,1/5] tests/sw_sync: use igt_fork_helper (rev2) Patchwork
2018-02-20 15:22 ` [igt-dev] ✗ Fi.CI.BAT: warning for series starting with [RFC,1/5] tests/sw_sync: use igt_fork_helper (rev3) Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180220113041.18520-1-petri.latvala@intel.com \
--to=petri.latvala@intel.com \
--cc=igt-dev@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox