From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To: igt-dev@lists.freedesktop.org
Subject: [igt-dev] [PATCH i-g-t] tests/kms_frontbuffer_tracking: Fix Y alignment in the scaledprimary subtest, v3.
Date: Tue, 20 Mar 2018 08:39:28 +0100 [thread overview]
Message-ID: <20180320073928.73411-1-maarten.lankhorst@linux.intel.com> (raw)
In-Reply-To: <20180319143500.3407-1-maarten.lankhorst@linux.intel.com>
This is hidden behind the other kms_frontbuffer_tracking failures,
but is its own fail.
On gen9/gen10 we fail the scaledprimary tests because FBC refuses
to be enabled with "plane Y offset is misaligned".
Looking at the kernel, this is a workaround for FIFO underruns
which can be tested as well. Test that with the right alignment, FBC
is enabled and with misalignment FBC is disabled on <= gen10.
Changes since v1:
- Always check both alignments.
Changes since v2:
- Fix gen assignment.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
---
tests/kms_frontbuffer_tracking.c | 18 ++++++++++++++++--
1 file changed, 16 insertions(+), 2 deletions(-)
diff --git a/tests/kms_frontbuffer_tracking.c b/tests/kms_frontbuffer_tracking.c
index 454103d367c7..5576b058b852 100644
--- a/tests/kms_frontbuffer_tracking.c
+++ b/tests/kms_frontbuffer_tracking.c
@@ -2751,8 +2751,10 @@ static void scaledprimary_subtest(const struct test_mode *t)
struct igt_fb new_fb, *old_fb;
struct modeset_params *params = pick_params(t);
struct fb_region *reg = ¶ms->primary;
+ int gen = intel_gen(intel_get_drm_devid(drm.fd));
+ int src_y_upscale = ALIGN(reg->h / 4, 4);
- igt_require_f(intel_gen(intel_get_drm_devid(drm.fd)) >= 9,
+ igt_require_f(gen >= 9,
"Can't test primary plane scaling before gen 9\n");
prepare_subtest(t, NULL);
@@ -2801,11 +2803,23 @@ static void scaledprimary_subtest(const struct test_mode *t)
/* Destination doesn't fill the entire CRTC, upscaling. */
igt_fb_set_position(&new_fb, reg->plane,
- reg->x + reg->w / 4, reg->y + reg->h / 4);
+ reg->x + reg->w / 4, reg->y + src_y_upscale);
igt_fb_set_size(&new_fb, reg->plane, reg->w / 2, reg->h / 2);
igt_display_commit2(&drm.display, COMMIT_UNIVERSAL);
do_assertions(DONT_ASSERT_CRC);
+ /*
+ * On gen <= 10 HW, FBC is not enabled on a plane with a Y offset
+ * that isn't divisible by 4, because it causes FIFO underruns.
+ *
+ * Check that FBC is disabled.
+ */
+ igt_fb_set_position(&new_fb, reg->plane,
+ reg->x + reg->w / 4, reg->y + src_y_upscale + 3);
+ igt_fb_set_size(&new_fb, reg->plane, reg->w / 2, reg->h / 2);
+ igt_display_commit2(&drm.display, COMMIT_UNIVERSAL);
+ do_assertions(DONT_ASSERT_CRC | (gen <= 10 ? ASSERT_FBC_DISABLED : 0));
+
/* Back to the good and old blue fb. */
igt_plane_set_fb(reg->plane, old_fb);
igt_plane_set_position(params->primary.plane, 0, 0);
--
2.16.2
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev
next prev parent reply other threads:[~2018-03-20 7:39 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-19 14:23 [igt-dev] [PATCH i-g-t] tests/kms_frontbuffer_tracking: Fix Y alignment in the scaledprimary subtest Maarten Lankhorst
2018-03-19 14:35 ` [igt-dev] [PATCH i-g-t] tests/kms_frontbuffer_tracking: Fix Y alignment in the scaledprimary subtest, v2 Maarten Lankhorst
2018-03-20 7:39 ` Maarten Lankhorst [this message]
2018-03-26 13:24 ` [igt-dev] [PATCH i-g-t] tests/kms_frontbuffer_tracking: Fix Y alignment in the scaledprimary subtest, v3 Maarten Lankhorst
2018-03-28 10:50 ` Lofstedt, Marta
2018-03-28 11:39 ` Maarten Lankhorst
2018-03-19 20:35 ` [igt-dev] ✓ Fi.CI.BAT: success for tests/kms_frontbuffer_tracking: Fix Y alignment in the scaledprimary subtest. (rev2) Patchwork
2018-03-19 23:49 ` [igt-dev] ✗ Fi.CI.IGT: failure " Patchwork
2018-03-20 8:32 ` [igt-dev] ✓ Fi.CI.BAT: success for tests/kms_frontbuffer_tracking: Fix Y alignment in the scaledprimary subtest. (rev3) Patchwork
2018-03-20 9:53 ` [igt-dev] ✓ Fi.CI.IGT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180320073928.73411-1-maarten.lankhorst@linux.intel.com \
--to=maarten.lankhorst@linux.intel.com \
--cc=igt-dev@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox