From: Piotr Piorkowski <piotr.piorkowski@intel.com>
To: igt-dev@lists.freedesktop.org
Subject: [igt-dev] [PATCH v2 2/2] tests/debugfs_test: Add subtest guc_log_relay
Date: Tue, 24 Apr 2018 09:50:04 +0200 [thread overview]
Message-ID: <20180424075004.18094-2-piotr.piorkowski@intel.com> (raw)
In-Reply-To: <20180410135227.13779-1-piotr.piorkowski@intel.com>
From: Piotr Piórkowski <piotr.piorkowski@intel.com>
We doesn't have any tests to verify functionality of i915_guc_log_relay.
I think we should test this component.
Let's add simple subtest to debugfs_test, which will test if guc
is enabled:
- opening the i915_guc_log_relay and creating a file guc_log0,
- flushing GuC log buffer,
- closing i915_guc_log_relay with removing from debugfs guc_log0.
Otherwise, the test will check if the attempt to open the guc_log_relay
returns an error ENODEV.
v2:
- guc isn't required for run the subtest (Chris)
- rewrite subtest as function (Michal Winiarski)
- add case when the guc is not enabled
Signed-off-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Lukasz Fiedorowicz <lukasz.fiedorowicz@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
---
tests/debugfs_test.c | 93 ++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 93 insertions(+)
diff --git a/tests/debugfs_test.c b/tests/debugfs_test.c
index 2e87e442..c7a953b1 100644
--- a/tests/debugfs_test.c
+++ b/tests/debugfs_test.c
@@ -26,6 +26,7 @@
#include <fcntl.h>
#include <sys/types.h>
#include <dirent.h>
+#include <errno.h>
static void read_and_discard_sysfs_entries(int path_fd, int indent)
{
@@ -87,6 +88,95 @@ static void read_and_discard_sysfs_entries(int path_fd, int indent)
closedir(dir);
}
+static bool is_guc_loaded(int gfx_fd)
+{
+ bool load;
+
+ load = igt_debugfs_search(gfx_fd, "i915_guc_load_status",
+ "\tstatus: fetch SUCCESS, load SUCCESS");
+ igt_debug("GuC %s loaded\n", load ? "is" : "is not");
+
+ return load;
+}
+
+#define I915_GUC_LOG_RELAY_FILE "i915_guc_log_relay"
+#define GUC_LOG_FILE "guc_log0"
+
+static void check_guc_log_relay(int gfx_fd)
+{
+
+ int page_size = getpagesize();
+ int fd_relay = -1, fd_log = -1;
+ ssize_t read_size;
+ uint8_t *buffer;
+ bool guc_is_loaded;
+ int debugfs;
+
+ guc_is_loaded = is_guc_loaded(gfx_fd);
+
+ debugfs = igt_debugfs_dir(gfx_fd);
+ fd_relay = openat(debugfs, I915_GUC_LOG_RELAY_FILE, O_RDWR);
+
+ if (!guc_is_loaded) {
+ igt_debug("Case when GuC is disabled\n");
+ igt_debug("Attempt open file %s return value: %d ( %m )\n",
+ I915_GUC_LOG_RELAY_FILE, errno);
+
+ igt_assert(errno == ENODEV);
+ return;
+ }
+
+ igt_debug("Case when GuC is enabled\n");
+
+ igt_assert(fd_relay > 0);
+ /*
+ * The GUC_LOG_FILE should be created
+ * after opening the I915_GUC_LOG_RELAY_FILE file
+ */
+ fd_log = igt_debugfs_open(gfx_fd, GUC_LOG_FILE, O_RDONLY);
+ igt_assert(fd_log > 0);
+
+ /*
+ * We want to check flush and read from GUC_LOG_FILE.
+ * First, we read all available bytes from buffer
+ * (if any bytes are ready to be read).
+ */
+ buffer = malloc(page_size);
+ do {
+ read_size = read(fd_log, buffer, page_size);
+ igt_debug("Shall attempt to read %d bytes from file %s.\n"
+ "The number of bytes actually read: %li\n",
+ page_size, GUC_LOG_FILE, read_size);
+ } while (read_size != 0);
+
+ /*
+ * When buffer is empty, we trigger a flush
+ * by sending anything to the file
+ * I915_GUC_LOG_RELAY_FILE
+ */
+ write(fd_relay, buffer, 1);
+
+ /* We read again and now we should get some bytes */
+ read_size = read(fd_log, buffer, page_size);
+
+ free(buffer);
+
+ igt_debug("Shall attempt to read %d bytes from file %s.\n"
+ "The number of bytes actually read: %li\n",
+ page_size, GUC_LOG_FILE, read_size);
+
+
+ igt_assert(read_size > 0);
+
+ /*
+ * Now we try close the I915_GUC_LOG_RELAY_FILE file.
+ * This should cause the GUC_LOG_FILE file to be closed
+ * and removed from debugfs
+ */
+ close(fd_relay);
+ igt_assert(!igt_debugfs_has_filename(gfx_fd, GUC_LOG_FILE));
+}
+
igt_main
{
int fd = -1, debugfs;
@@ -173,6 +263,9 @@ igt_main
igt_success();
}
+ igt_subtest("guc_log_relay")
+ check_guc_log_relay(fd);
+
igt_fixture {
igt_display_fini(&display);
close(debugfs);
--
2.14.3
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev
next prev parent reply other threads:[~2018-04-24 7:50 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-10 13:52 [igt-dev] [PATCH i-g-t 1/2] lib/igt_debugfs: Add function to check if file exists in debugfs Piotr Piórkowski
2018-04-10 13:52 ` [igt-dev] [PATCH i-g-t 2/2] tests/debugfs_test: Add subtest guc_log_relay Piotr Piórkowski
2018-04-10 14:06 ` Chris Wilson
2018-04-10 14:02 ` [igt-dev] [PATCH i-g-t 1/2] lib/igt_debugfs: Add function to check if file exists in debugfs Chris Wilson
2018-04-10 14:46 ` [igt-dev] ✓ Fi.CI.BAT: success for series starting with [i-g-t,1/2] " Patchwork
2018-04-10 16:57 ` [igt-dev] ✗ Fi.CI.IGT: warning " Patchwork
2018-04-24 7:50 ` [igt-dev] [PATCH v2 1/2] " Piotr Piorkowski
2018-04-24 8:27 ` Chris Wilson
2018-05-15 15:29 ` [igt-dev] [PATCH v3 " Piotr Piorkowski
2018-05-21 12:55 ` Piotr Piorkowski
2018-05-21 12:55 ` [igt-dev] [PATCH v3 2/2] tests/debugfs_test: Add subtest guc_log_relay Piotr Piorkowski
2018-04-24 7:50 ` Piotr Piorkowski [this message]
2018-04-24 8:34 ` [igt-dev] [PATCH v2 " Chris Wilson
2018-04-24 13:24 ` Piorkowski, Piotr
2018-04-24 8:52 ` [igt-dev] ✗ Fi.CI.BAT: failure for series starting with [v2,1/2] lib/igt_debugfs: Add function to check if file exists in debugfs (rev2) Patchwork
2018-05-15 15:57 ` [igt-dev] ✗ Fi.CI.BAT: failure for series starting with [v3,1/2] lib/igt_debugfs: Add function to check if file exists in debugfs (rev3) Patchwork
2018-05-21 15:08 ` [igt-dev] ✗ Fi.CI.BAT: failure for series starting with [v3,2/2] tests/debugfs_test: Add subtest guc_log_relay (rev5) Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180424075004.18094-2-piotr.piorkowski@intel.com \
--to=piotr.piorkowski@intel.com \
--cc=igt-dev@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox