From: Imre Deak <imre.deak@intel.com>
To: Radhakrishna Sripada <radhakrishna.sripada@intel.com>,
Manasi Navare <manasi.d.navare@intel.com>
Cc: igt-dev@lists.freedesktop.org
Subject: Re: [igt-dev] [PATCH i-g-t v3] tools/intel_dp_compliance: Use ARGB8888 format fbs for Gen 10
Date: Tue, 17 Jul 2018 13:00:30 +0300 [thread overview]
Message-ID: <20180717100030.GA25183@ideak-desk.fi.intel.com> (raw)
In-Reply-To: <20180713211114.10588-1-radhakrishna.sripada@intel.com>
On Fri, Jul 13, 2018 at 02:11:14PM -0700, Radhakrishna Sripada wrote:
> According to Display WA #1172, to truly bypass the color data on Gen 10
> use ARGB8888 instead of XRGB8888 to pass compliance.
>
> v2: Use ARGB8888 format only for video pattern fb, set per pixel alpha
> value to 0xff in fill_framebuffer.(Imre)
> v3: Set the aplha value for each pixel(Imre)
>
> Cc: Imre Deak <imre.deak@intel.com>
> Cc: Manasi Navare <manasi.d.navare@intel.com>
> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Pushed to igt, thanks for the patch and review.
> ---
> tools/intel_dp_compliance.c | 20 ++++++++++++++------
> 1 file changed, 14 insertions(+), 6 deletions(-)
>
> diff --git a/tools/intel_dp_compliance.c b/tools/intel_dp_compliance.c
> index c40548e79227..14631a46a9c1 100644
> --- a/tools/intel_dp_compliance.c
> +++ b/tools/intel_dp_compliance.c
> @@ -175,7 +175,7 @@ static int tio_fd;
> struct termios saved_tio;
>
> drmModeRes *resources;
> -int drm_fd, modes;
> +int drm_fd, modes, gen;
> uint64_t tiling = LOCAL_DRM_FORMAT_MOD_NONE;
> uint32_t depth = 24, stride, bpp;
> int specified_mode_num = -1, specified_disp_id = -1;
> @@ -506,9 +506,13 @@ static int setup_video_pattern_framebuffer(struct connector *dp_conn)
>
> video_width = dp_conn->test_pattern.hdisplay;
> video_height = dp_conn->test_pattern.vdisplay;
> + /*
> + * Display WA1172: Gen10 To pass the color data unaffected set either
> + * per-pixel alpha or Plane alpha to 0xff. Use ARGB8888 and set alpha to 0xff.
> + */
> dp_conn->test_pattern.fb = igt_create_fb(drm_fd,
> video_width, video_height,
> - DRM_FORMAT_XRGB8888,
> + gen == 10 ? DRM_FORMAT_ARGB8888 : DRM_FORMAT_XRGB8888,
> LOCAL_DRM_FORMAT_MOD_NONE,
> &dp_conn->test_pattern.fb_pattern);
> igt_assert(dp_conn->test_pattern.fb);
> @@ -537,6 +541,7 @@ static int fill_framebuffer(struct connector *dp_conn)
> uint32_t *red_ptr, *green_ptr, *blue_ptr, *white_ptr, *src_ptr, *dst_ptr;
> int x, y;
> int32_t pixel_val;
> + uint8_t alpha;
>
> video_width = dp_conn->test_pattern.hdisplay;
> video_height = dp_conn->test_pattern.vdisplay;
> @@ -554,10 +559,12 @@ static int fill_framebuffer(struct connector *dp_conn)
> while (x < video_width) {
> for (pixel_val = 0; pixel_val < 256;
> pixel_val = pixel_val + (256 / tile_width)) {
> - red_ptr[x] = pixel_val << 16;
> - green_ptr[x] = pixel_val << 8;
> - blue_ptr[x] = pixel_val << 0;
> - white_ptr[x] = red_ptr[x] | green_ptr[x] | blue_ptr[x];
> + alpha = gen == 10 ? 0xff : 0;
> + red_ptr[x] = alpha << 24 | pixel_val << 16;
> + green_ptr[x] = alpha << 24 | pixel_val << 8;
> + blue_ptr[x] = alpha << 24 | pixel_val << 0;
> + white_ptr[x] = alpha << 24 | red_ptr[x] | green_ptr[x] |
> + blue_ptr[x];
> if (++x >= video_width)
> break;
> }
> @@ -1036,6 +1043,7 @@ int main(int argc, char **argv)
> set_termio_mode();
>
> drm_fd = drm_open_driver(DRIVER_ANY);
> + gen = intel_gen(intel_get_drm_devid(drm_fd));
>
> kmstest_set_vt_graphics_mode();
> setup_debugfs_files();
> --
> 2.9.3
>
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev
prev parent reply other threads:[~2018-07-17 10:01 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-13 21:11 [igt-dev] [PATCH i-g-t v3] tools/intel_dp_compliance: Use ARGB8888 format fbs for Gen 10 Radhakrishna Sripada
2018-07-13 21:37 ` Manasi Navare
2018-07-13 21:53 ` [igt-dev] ✓ Fi.CI.BAT: success for tools/intel_dp_compliance: Use ARGB8888 format fbs for Gen 10 (rev3) Patchwork
2018-07-13 22:48 ` [igt-dev] ✓ Fi.CI.IGT: " Patchwork
2018-07-17 10:00 ` Imre Deak [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180717100030.GA25183@ideak-desk.fi.intel.com \
--to=imre.deak@intel.com \
--cc=igt-dev@lists.freedesktop.org \
--cc=manasi.d.navare@intel.com \
--cc=radhakrishna.sripada@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).