From: Haneen Mohammed <hamohammed.sa@gmail.com>
To: igt-dev@lists.freedesktop.org
Cc: intel-gfx@lists.freedesktop.org, seanpaul@chromium.org, daniel@ffwll.ch
Subject: [igt-dev] [PATCH i-g-t V2] tests/kms_cursor_crc: Open DRM device with DRIVER_ANY
Date: Thu, 16 Aug 2018 23:56:55 +0300 [thread overview]
Message-ID: <20180816205655.GA13515@haneenDRM> (raw)
So that this test can be run in drivers other than i915.
Remove devid and only check it if the driver is i915.
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
---
changes in v2:
- return false for has_nonsquare_cursors() when driver not i915.
tests/kms_cursor_crc.c | 31 +++++++++++++++++++++----------
1 file changed, 21 insertions(+), 10 deletions(-)
diff --git a/tests/kms_cursor_crc.c b/tests/kms_cursor_crc.c
index a164839e..99946b1a 100644
--- a/tests/kms_cursor_crc.c
+++ b/tests/kms_cursor_crc.c
@@ -59,7 +59,6 @@ typedef struct {
int curw, curh; /* cursor size */
int cursor_max_w, cursor_max_h;
igt_pipe_crc_t *pipe_crc;
- uint32_t devid;
unsigned flags;
} data_t;
@@ -108,6 +107,13 @@ static void cursor_disable(data_t *data)
static bool chv_cursor_broken(data_t *data, int x)
{
+ uint32_t devid;
+
+ if (!is_i915_device(data->drm_fd))
+ return false;
+
+ devid = intel_get_drm_devid(data->drm_fd);
+
/*
* CHV gets a FIFO underrun on pipe C when cursor x coordinate
* is negative and the cursor visible.
@@ -121,7 +127,7 @@ static bool chv_cursor_broken(data_t *data, int x)
if (x >= 0)
return false;
- return IS_CHERRYVIEW(data->devid) && data->pipe == PIPE_C;
+ return IS_CHERRYVIEW(devid) && data->pipe == PIPE_C;
}
static bool cursor_visible(data_t *data, int x, int y)
@@ -459,8 +465,15 @@ static void create_cursor_fb(data_t *data, int cur_w, int cur_h)
igt_put_cairo_ctx(data->drm_fd, &data->fb, cr);
}
-static bool has_nonsquare_cursors(uint32_t devid)
+static bool has_nonsquare_cursors(data_t *data)
{
+ uint32_t devid;
+
+ if (!is_i915_device(data->drm_fd))
+ return false;
+
+ devid = intel_get_drm_devid(data->drm_fd);
+
/*
* Test non-square cursors a bit on the platforms
* that support such things.
@@ -616,19 +629,19 @@ static void run_test_generic(data_t *data)
/* Using created cursor FBs to test cursor support */
igt_subtest_f("cursor-%dx%d-onscreen", w, h) {
- igt_require(has_nonsquare_cursors(data->devid));
+ igt_require(has_nonsquare_cursors(data));
run_test(data, test_crc_onscreen, w, h);
}
igt_subtest_f("cursor-%dx%d-offscreen", w, h) {
- igt_require(has_nonsquare_cursors(data->devid));
+ igt_require(has_nonsquare_cursors(data));
run_test(data, test_crc_offscreen, w, h);
}
igt_subtest_f("cursor-%dx%d-sliding", w, h) {
- igt_require(has_nonsquare_cursors(data->devid));
+ igt_require(has_nonsquare_cursors(data));
run_test(data, test_crc_sliding, w, h);
}
igt_subtest_f("cursor-%dx%d-random", w, h) {
- igt_require(has_nonsquare_cursors(data->devid));
+ igt_require(has_nonsquare_cursors(data));
run_test(data, test_crc_random, w, h);
}
@@ -647,9 +660,7 @@ igt_main
igt_skip_on_simulation();
igt_fixture {
- data.drm_fd = drm_open_driver_master(DRIVER_INTEL);
-
- data.devid = intel_get_drm_devid(data.drm_fd);
+ data.drm_fd = drm_open_driver_master(DRIVER_ANY);
ret = drmGetCap(data.drm_fd, DRM_CAP_CURSOR_WIDTH, &cursor_width);
igt_assert(ret == 0 || errno == EINVAL);
--
2.17.1
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev
next reply other threads:[~2018-08-16 20:56 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-16 20:56 Haneen Mohammed [this message]
2018-08-17 1:50 ` [igt-dev] ✓ Fi.CI.IGT: success for tests/kms_cursor_crc: Open DRM device with DRIVER_ANY (rev2) Patchwork
2018-08-21 13:11 ` [igt-dev] [PATCH i-g-t V2] tests/kms_cursor_crc: Open DRM device with DRIVER_ANY Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180816205655.GA13515@haneenDRM \
--to=hamohammed.sa@gmail.com \
--cc=daniel@ffwll.ch \
--cc=igt-dev@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=seanpaul@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).