[Intel-gfx] [PATH i-g-t 00/13] Tracing & workload simulation misc patches

[Intel-gfx] [PATH i-g-t 00/13] Tracing & workload simulation misc patches

[Tvrtko Ursulin]

From: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

These are the small fixes and new features not depending on any unmerged
patches.

Virtual engine and Dynamic SSEU support is built on top of these.

Each sub-series (trace.pl, gem_wsim, media-bench) starts with trivial patches
and fixed, which are then followed by new features in cases of gem_wsim and
media-bench.

Tvrtko Ursulin (13):
  trace.pl: Fix frequency timeline
  trace.pl: Use undocumented -o to perf record to allow tee
  gem_wsim: Fix BCS usage under VCS2 remap warning
  gem_wsim: Check sleep times
  gem_wsim: Make workload commands case sensitive
  gem_wsim: Context priority support
  gem_wsim: Make batches preemptable by default
  gem_wsim: Per context preemption point control
  media-bench: Update for engine=class:instance tracepoints
  media-bench: Protect against incorrect -b syntax
  media-bench: Fix tracing of direct workloads
  media-bench: Write out trace files directly.
  media-bench: Add mixed mode evaluation

 benchmarks/gem_wsim.c  | 214 ++++++++++++++++++++++++++++++++++---
 benchmarks/wsim/README |  34 ++++++
 scripts/media-bench.pl | 235 +++++++++++++++++++++++++++++++----------
 scripts/trace.pl       |   5 +-
 4 files changed, 416 insertions(+), 72 deletions(-)

-- 
2.17.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] [PATH i-g-t 01/13] trace.pl: Fix frequency timeline

[Tvrtko Ursulin]

From: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

Frequency timeline needs to be finished with an entry spanning to the end
of known time so that the last known frequency is displayed.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
---
 scripts/trace.pl | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/scripts/trace.pl b/scripts/trace.pl
index 1924333e12b6..2976cfdf585a 100755
--- a/scripts/trace.pl
+++ b/scripts/trace.pl
@@ -1201,6 +1201,8 @@ foreach my $key (sort sortQueue keys %db) {
 	last if $i > $max_items;
 }
 
+push @freqs, [$prev_freq_ts, $last_ts, $prev_freq] if $prev_freq;
+
 foreach my $item (@freqs) {
 	my ($start, $end, $freq) = @$item;
 	my $startend;
-- 
2.17.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] [PATH i-g-t 02/13] trace.pl: Use undocumented -o to perf record to allow tee

[Tvrtko Ursulin]

From: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
---
 scripts/trace.pl | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/scripts/trace.pl b/scripts/trace.pl
index 2976cfdf585a..18f9f3b18396 100755
--- a/scripts/trace.pl
+++ b/scripts/trace.pl
@@ -170,8 +170,9 @@ sub arg_trace
 	if ($_[0] eq '--trace') {
 		shift @_;
 
+		unshift @_, '--';
 		unshift @_, join(',', @events);
-		unshift @_, ('perf', 'record', '-a', '-c', '1', '-q', '-e');
+		unshift @_, ('perf', 'record', '-a', '-c', '1', '-q', '-o', 'perf.data', '-e');
 
 		exec @_;
 	}
-- 
2.17.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] [PATH i-g-t 03/13] gem_wsim: Fix BCS usage under VCS2 remap warning

[Tvrtko Ursulin]

From: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

Need to check we actually are in VCS2 remapping mode!

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
---
 benchmarks/gem_wsim.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/benchmarks/gem_wsim.c b/benchmarks/gem_wsim.c
index 80f180829241..25af4d678ba4 100644
--- a/benchmarks/gem_wsim.c
+++ b/benchmarks/gem_wsim.c
@@ -592,7 +592,7 @@ add_step:
 		}
 	}
 
-	if (bcs_used && verbose)
+	if (bcs_used && (flags & VCS2REMAP) && verbose)
 		printf("BCS usage in workload with VCS2 remapping enabled!\n");
 
 	return wrk;
-- 
2.17.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[igt-dev] [PATH i-g-t 04/13] gem_wsim: Check sleep times

[Tvrtko Ursulin]

From: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

Notice in more places if we are running behind.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
---
 benchmarks/gem_wsim.c | 52 ++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 46 insertions(+), 6 deletions(-)

diff --git a/benchmarks/gem_wsim.c b/benchmarks/gem_wsim.c
index 25af4d678ba4..b05e9760f419 100644
--- a/benchmarks/gem_wsim.c
+++ b/benchmarks/gem_wsim.c
@@ -1718,6 +1718,21 @@ static bool sync_deps(struct workload *wrk, struct w_step *w)
 	return synced;
 }
 
+static unsigned int measured_usleep(unsigned int usec)
+{
+	struct timespec ts = { };
+	unsigned int slept;
+
+	slept = igt_nsec_elapsed(&ts);
+	igt_assert(slept == 0);
+	do {
+		usleep(usec - slept);
+		slept = igt_nsec_elapsed(&ts) / 1000;
+	} while (slept < usec);
+
+	return igt_nsec_elapsed(&ts);
+}
+
 static void *run_workload(void *data)
 {
 	struct workload *wrk = (struct workload *)data;
@@ -1739,7 +1754,7 @@ static void *run_workload(void *data)
 	     count++) {
 		unsigned int cur_seqno = wrk->sync_seqno;
 
-		clock_gettime(CLOCK_MONOTONIC, &wrk->repeat_start);
+		igt_gettime(&wrk->repeat_start);
 
 		for (i = 0, w = wrk->steps; wrk->run && (i < wrk->nr_steps);
 		     i++, w++) {
@@ -1751,13 +1766,14 @@ static void *run_workload(void *data)
 			} else if (w->type == PERIOD) {
 				struct timespec now;
 
-				clock_gettime(CLOCK_MONOTONIC, &now);
+				igt_gettime(&now);
 				do_sleep = w->period -
 					   elapsed_us(&wrk->repeat_start, &now);
 				if (do_sleep < 0) {
-					if (verbose > 1)
-						printf("%u: Dropped period @ %u/%u (%dus late)!\n",
-						       wrk->id, count, i, do_sleep);
+					if (verbose > 1 &&
+					    -do_sleep > 10 * w->period / 100)
+						printf("%u: Missed period @ %u/%u (%dus late)!\n",
+						       wrk->id, count, i, -do_sleep);
 					continue;
 				}
 			} else if (w->type == SYNC) {
@@ -1793,7 +1809,31 @@ static void *run_workload(void *data)
 			}
 
 			if (do_sleep || w->type == PERIOD) {
-				usleep(do_sleep);
+				long slept = measured_usleep(do_sleep) / 1000;
+
+				if ( w->type == PERIOD) {
+					struct timespec now;
+
+					igt_gettime(&now);
+
+					slept = elapsed_us(&wrk->repeat_start,
+							   &now);
+
+					if (verbose > 1 &&
+					    slept > (110 * w->period / 100))
+						printf("%u: Overslept period by %ldus @ %u/%u! (%uus)\n",
+						       wrk->id,
+						       -slept, count,
+						       i, w->period);
+				} else {
+					if (verbose > 1 &&
+					    slept > (110 * do_sleep / 100))
+						printf("%u: Overslept by %ldus @ %u/%u! (%uus)\n",
+						       wrk->id,
+						       slept - do_sleep, count,
+						       i, do_sleep);
+				}
+
 				continue;
 			}
 
-- 
2.17.1

_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev

Re: [igt-dev] [PATH i-g-t 04/13] gem_wsim: Check sleep times

[Ville Syrjälä]

On Wed, Sep 05, 2018 at 02:49:30PM +0100, Tvrtko Ursulin wrote:
> From: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
> 
> Notice in more places if we are running behind.
> 
> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
> ---
>  benchmarks/gem_wsim.c | 52 ++++++++++++++++++++++++++++++++++++++-----
>  1 file changed, 46 insertions(+), 6 deletions(-)
> 
> diff --git a/benchmarks/gem_wsim.c b/benchmarks/gem_wsim.c
> index 25af4d678ba4..b05e9760f419 100644
> --- a/benchmarks/gem_wsim.c
> +++ b/benchmarks/gem_wsim.c
> @@ -1718,6 +1718,21 @@ static bool sync_deps(struct workload *wrk, struct w_step *w)
>  	return synced;
>  }
>  
> +static unsigned int measured_usleep(unsigned int usec)
> +{
> +	struct timespec ts = { };
> +	unsigned int slept;
> +
> +	slept = igt_nsec_elapsed(&ts);
> +	igt_assert(slept == 0);
> +	do {
> +		usleep(usec - slept);
> +		slept = igt_nsec_elapsed(&ts) / 1000;
> +	} while (slept < usec);

clock_nanosleep(ABS)?

> +
> +	return igt_nsec_elapsed(&ts);
> +}
> +
>  static void *run_workload(void *data)
>  {
>  	struct workload *wrk = (struct workload *)data;
> @@ -1739,7 +1754,7 @@ static void *run_workload(void *data)
>  	     count++) {
>  		unsigned int cur_seqno = wrk->sync_seqno;
>  
> -		clock_gettime(CLOCK_MONOTONIC, &wrk->repeat_start);
> +		igt_gettime(&wrk->repeat_start);
>  
>  		for (i = 0, w = wrk->steps; wrk->run && (i < wrk->nr_steps);
>  		     i++, w++) {
> @@ -1751,13 +1766,14 @@ static void *run_workload(void *data)
>  			} else if (w->type == PERIOD) {
>  				struct timespec now;
>  
> -				clock_gettime(CLOCK_MONOTONIC, &now);
> +				igt_gettime(&now);
>  				do_sleep = w->period -
>  					   elapsed_us(&wrk->repeat_start, &now);
>  				if (do_sleep < 0) {
> -					if (verbose > 1)
> -						printf("%u: Dropped period @ %u/%u (%dus late)!\n",
> -						       wrk->id, count, i, do_sleep);
> +					if (verbose > 1 &&
> +					    -do_sleep > 10 * w->period / 100)
> +						printf("%u: Missed period @ %u/%u (%dus late)!\n",
> +						       wrk->id, count, i, -do_sleep);
>  					continue;
>  				}
>  			} else if (w->type == SYNC) {
> @@ -1793,7 +1809,31 @@ static void *run_workload(void *data)
>  			}
>  
>  			if (do_sleep || w->type == PERIOD) {
> -				usleep(do_sleep);
> +				long slept = measured_usleep(do_sleep) / 1000;
> +
> +				if ( w->type == PERIOD) {
> +					struct timespec now;
> +
> +					igt_gettime(&now);
> +
> +					slept = elapsed_us(&wrk->repeat_start,
> +							   &now);
> +
> +					if (verbose > 1 &&
> +					    slept > (110 * w->period / 100))
> +						printf("%u: Overslept period by %ldus @ %u/%u! (%uus)\n",
> +						       wrk->id,
> +						       -slept, count,
> +						       i, w->period);
> +				} else {
> +					if (verbose > 1 &&
> +					    slept > (110 * do_sleep / 100))
> +						printf("%u: Overslept by %ldus @ %u/%u! (%uus)\n",
> +						       wrk->id,
> +						       slept - do_sleep, count,
> +						       i, do_sleep);
> +				}
> +
>  				continue;
>  			}
>  
> -- 
> 2.17.1
> 
> _______________________________________________
> igt-dev mailing list
> igt-dev@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/igt-dev

-- 
Ville Syrjälä
Intel
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev

Re: [igt-dev] [Intel-gfx] [PATH i-g-t 04/13] gem_wsim: Check sleep times

[Tvrtko Ursulin]

On 05/09/2018 15:09, Ville Syrjälä wrote:
> On Wed, Sep 05, 2018 at 02:49:30PM +0100, Tvrtko Ursulin wrote:
>> From: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
>>
>> Notice in more places if we are running behind.
>>
>> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
>> ---
>>   benchmarks/gem_wsim.c | 52 ++++++++++++++++++++++++++++++++++++++-----
>>   1 file changed, 46 insertions(+), 6 deletions(-)
>>
>> diff --git a/benchmarks/gem_wsim.c b/benchmarks/gem_wsim.c
>> index 25af4d678ba4..b05e9760f419 100644
>> --- a/benchmarks/gem_wsim.c
>> +++ b/benchmarks/gem_wsim.c
>> @@ -1718,6 +1718,21 @@ static bool sync_deps(struct workload *wrk, struct w_step *w)
>>   	return synced;
>>   }
>>   
>> +static unsigned int measured_usleep(unsigned int usec)
>> +{
>> +	struct timespec ts = { };
>> +	unsigned int slept;
>> +
>> +	slept = igt_nsec_elapsed(&ts);
>> +	igt_assert(slept == 0);
>> +	do {
>> +		usleep(usec - slept);
>> +		slept = igt_nsec_elapsed(&ts) / 1000;
>> +	} while (slept < usec);
> 
> clock_nanosleep(ABS)?

Hm I think I see what you mean. Rather than a relative sleep trying to 
hit the loop period, ask from the kernel (or glibc, I don't know who 
implements it) to sleep until an absolute target. This totally makes 
sense and would simplify the code from one angle, I am just not sure if 
absolute sleep can be relied upon any better to not oversleep. Well, 
actually for scheduling delays not to affect the caller. However maybe 
it doesn't matter since AFAIR my main problem were dropped period due 
GPU activity (the first pair of warning messages in the patch), and 
again AFAIR, it was quite hard to hit the second ones.

I'll revisit it to remind myself for sure.

Thanks for the drive-by, it was extremely surprising you looked into 
this obscure for most series. :)

Regards,

Tvrtko

>> +
>> +	return igt_nsec_elapsed(&ts);
>> +}
>> +
>>   static void *run_workload(void *data)
>>   {
>>   	struct workload *wrk = (struct workload *)data;
>> @@ -1739,7 +1754,7 @@ static void *run_workload(void *data)
>>   	     count++) {
>>   		unsigned int cur_seqno = wrk->sync_seqno;
>>   
>> -		clock_gettime(CLOCK_MONOTONIC, &wrk->repeat_start);
>> +		igt_gettime(&wrk->repeat_start);
>>   
>>   		for (i = 0, w = wrk->steps; wrk->run && (i < wrk->nr_steps);
>>   		     i++, w++) {
>> @@ -1751,13 +1766,14 @@ static void *run_workload(void *data)
>>   			} else if (w->type == PERIOD) {
>>   				struct timespec now;
>>   
>> -				clock_gettime(CLOCK_MONOTONIC, &now);
>> +				igt_gettime(&now);
>>   				do_sleep = w->period -
>>   					   elapsed_us(&wrk->repeat_start, &now);
>>   				if (do_sleep < 0) {
>> -					if (verbose > 1)
>> -						printf("%u: Dropped period @ %u/%u (%dus late)!\n",
>> -						       wrk->id, count, i, do_sleep);
>> +					if (verbose > 1 &&
>> +					    -do_sleep > 10 * w->period / 100)
>> +						printf("%u: Missed period @ %u/%u (%dus late)!\n",
>> +						       wrk->id, count, i, -do_sleep);
>>   					continue;
>>   				}
>>   			} else if (w->type == SYNC) {
>> @@ -1793,7 +1809,31 @@ static void *run_workload(void *data)
>>   			}
>>   
>>   			if (do_sleep || w->type == PERIOD) {
>> -				usleep(do_sleep);
>> +				long slept = measured_usleep(do_sleep) / 1000;
>> +
>> +				if ( w->type == PERIOD) {
>> +					struct timespec now;
>> +
>> +					igt_gettime(&now);
>> +
>> +					slept = elapsed_us(&wrk->repeat_start,
>> +							   &now);
>> +
>> +					if (verbose > 1 &&
>> +					    slept > (110 * w->period / 100))
>> +						printf("%u: Overslept period by %ldus @ %u/%u! (%uus)\n",
>> +						       wrk->id,
>> +						       -slept, count,
>> +						       i, w->period);
>> +				} else {
>> +					if (verbose > 1 &&
>> +					    slept > (110 * do_sleep / 100))
>> +						printf("%u: Overslept by %ldus @ %u/%u! (%uus)\n",
>> +						       wrk->id,
>> +						       slept - do_sleep, count,
>> +						       i, do_sleep);
>> +				}
>> +
>>   				continue;
>>   			}
>>   
>> -- 
>> 2.17.1
>>
>> _______________________________________________
>> igt-dev mailing list
>> igt-dev@lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/igt-dev
> 
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev

Re: [igt-dev] [Intel-gfx] [PATH i-g-t 04/13] gem_wsim: Check sleep times

[Chris Wilson]

Quoting Tvrtko Ursulin (2018-09-07 09:37:00)
> 
> On 05/09/2018 15:09, Ville Syrjälä wrote:
> > On Wed, Sep 05, 2018 at 02:49:30PM +0100, Tvrtko Ursulin wrote:
> >> From: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
> >>
> >> Notice in more places if we are running behind.
> >>
> >> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
> >> ---
> >>   benchmarks/gem_wsim.c | 52 ++++++++++++++++++++++++++++++++++++++-----
> >>   1 file changed, 46 insertions(+), 6 deletions(-)
> >>
> >> diff --git a/benchmarks/gem_wsim.c b/benchmarks/gem_wsim.c
> >> index 25af4d678ba4..b05e9760f419 100644
> >> --- a/benchmarks/gem_wsim.c
> >> +++ b/benchmarks/gem_wsim.c
> >> @@ -1718,6 +1718,21 @@ static bool sync_deps(struct workload *wrk, struct w_step *w)
> >>      return synced;
> >>   }
> >>   
> >> +static unsigned int measured_usleep(unsigned int usec)
> >> +{
> >> +    struct timespec ts = { };
> >> +    unsigned int slept;
> >> +
> >> +    slept = igt_nsec_elapsed(&ts);
> >> +    igt_assert(slept == 0);
> >> +    do {
> >> +            usleep(usec - slept);
> >> +            slept = igt_nsec_elapsed(&ts) / 1000;
> >> +    } while (slept < usec);
> > 
> > clock_nanosleep(ABS)?
> 
> Hm I think I see what you mean. Rather than a relative sleep trying to 
> hit the loop period, ask from the kernel (or glibc, I don't know who 
> implements it) to sleep until an absolute target. This totally makes 
> sense and would simplify the code from one angle, I am just not sure if 
> absolute sleep can be relied upon any better to not oversleep. Well, 
> actually for scheduling delays not to affect the caller. However maybe 
> it doesn't matter since AFAIR my main problem were dropped period due 
> GPU activity (the first pair of warning messages in the patch), and 
> again AFAIR, it was quite hard to hit the second ones.

Right, it removes the loop but we still want to keep the measurement.
-Chris
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev

Re: [Intel-gfx] [igt-dev] [PATH i-g-t 04/13] gem_wsim: Check sleep times

[Ville Syrjälä]

On Fri, Sep 07, 2018 at 09:45:14AM +0100, Chris Wilson wrote:
> Quoting Tvrtko Ursulin (2018-09-07 09:37:00)
> > 
> > On 05/09/2018 15:09, Ville Syrjälä wrote:
> > > On Wed, Sep 05, 2018 at 02:49:30PM +0100, Tvrtko Ursulin wrote:
> > >> From: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
> > >>
> > >> Notice in more places if we are running behind.
> > >>
> > >> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
> > >> ---
> > >>   benchmarks/gem_wsim.c | 52 ++++++++++++++++++++++++++++++++++++++-----
> > >>   1 file changed, 46 insertions(+), 6 deletions(-)
> > >>
> > >> diff --git a/benchmarks/gem_wsim.c b/benchmarks/gem_wsim.c
> > >> index 25af4d678ba4..b05e9760f419 100644
> > >> --- a/benchmarks/gem_wsim.c
> > >> +++ b/benchmarks/gem_wsim.c
> > >> @@ -1718,6 +1718,21 @@ static bool sync_deps(struct workload *wrk, struct w_step *w)
> > >>      return synced;
> > >>   }
> > >>   
> > >> +static unsigned int measured_usleep(unsigned int usec)
> > >> +{
> > >> +    struct timespec ts = { };
> > >> +    unsigned int slept;
> > >> +
> > >> +    slept = igt_nsec_elapsed(&ts);
> > >> +    igt_assert(slept == 0);
> > >> +    do {
> > >> +            usleep(usec - slept);
> > >> +            slept = igt_nsec_elapsed(&ts) / 1000;
> > >> +    } while (slept < usec);
> > > 
> > > clock_nanosleep(ABS)?
> > 
> > Hm I think I see what you mean. Rather than a relative sleep trying to 
> > hit the loop period, ask from the kernel (or glibc, I don't know who 
> > implements it) to sleep until an absolute target. This totally makes 
> > sense and would simplify the code from one angle, I am just not sure if 
> > absolute sleep can be relied upon any better to not oversleep. Well, 
> > actually for scheduling delays not to affect the caller. However maybe 
> > it doesn't matter since AFAIR my main problem were dropped period due 
> > GPU activity (the first pair of warning messages in the patch), and 
> > again AFAIR, it was quite hard to hit the second ones.
> 
> Right, it removes the loop but we still want to keep the measurement.

I guess we still want a loop if we're worried about signals? Not sure
why else we'd need a loop anyway. But the loop could be just something
like 'while (clock_nanosleep()) ;'

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [Intel-gfx] [igt-dev] [PATH i-g-t 04/13] gem_wsim: Check sleep times

[Tvrtko Ursulin]

On 07/09/2018 15:13, Ville Syrjälä wrote:
> On Fri, Sep 07, 2018 at 09:45:14AM +0100, Chris Wilson wrote:
>> Quoting Tvrtko Ursulin (2018-09-07 09:37:00)
>>>
>>> On 05/09/2018 15:09, Ville Syrjälä wrote:
>>>> On Wed, Sep 05, 2018 at 02:49:30PM +0100, Tvrtko Ursulin wrote:
>>>>> From: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
>>>>>
>>>>> Notice in more places if we are running behind.
>>>>>
>>>>> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
>>>>> ---
>>>>>    benchmarks/gem_wsim.c | 52 ++++++++++++++++++++++++++++++++++++++-----
>>>>>    1 file changed, 46 insertions(+), 6 deletions(-)
>>>>>
>>>>> diff --git a/benchmarks/gem_wsim.c b/benchmarks/gem_wsim.c
>>>>> index 25af4d678ba4..b05e9760f419 100644
>>>>> --- a/benchmarks/gem_wsim.c
>>>>> +++ b/benchmarks/gem_wsim.c
>>>>> @@ -1718,6 +1718,21 @@ static bool sync_deps(struct workload *wrk, struct w_step *w)
>>>>>       return synced;
>>>>>    }
>>>>>    
>>>>> +static unsigned int measured_usleep(unsigned int usec)
>>>>> +{
>>>>> +    struct timespec ts = { };
>>>>> +    unsigned int slept;
>>>>> +
>>>>> +    slept = igt_nsec_elapsed(&ts);
>>>>> +    igt_assert(slept == 0);
>>>>> +    do {
>>>>> +            usleep(usec - slept);
>>>>> +            slept = igt_nsec_elapsed(&ts) / 1000;
>>>>> +    } while (slept < usec);
>>>>
>>>> clock_nanosleep(ABS)?
>>>
>>> Hm I think I see what you mean. Rather than a relative sleep trying to
>>> hit the loop period, ask from the kernel (or glibc, I don't know who
>>> implements it) to sleep until an absolute target. This totally makes
>>> sense and would simplify the code from one angle, I am just not sure if
>>> absolute sleep can be relied upon any better to not oversleep. Well,
>>> actually for scheduling delays not to affect the caller. However maybe
>>> it doesn't matter since AFAIR my main problem were dropped period due
>>> GPU activity (the first pair of warning messages in the patch), and
>>> again AFAIR, it was quite hard to hit the second ones.
>>
>> Right, it removes the loop but we still want to keep the measurement.
> 
> I guess we still want a loop if we're worried about signals? Not sure
> why else we'd need a loop anyway. But the loop could be just something
> like 'while (clock_nanosleep()) ;'

In this case just a case of copying measured_usleep verbatim from 
another test because it was easy. Otherwise I think it's fine what you 
suggest, especially since Chris also complained about using igt helpers 
from outside tests/. So I'll respin to that effect.

Regards,

Tvrtko
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] [PATH i-g-t 05/13] gem_wsim: Make workload commands case sensitive

[Tvrtko Ursulin]

From: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

Need namespace for new commands and I never documented they are case
insensitive so it is fine.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
---
 benchmarks/gem_wsim.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/benchmarks/gem_wsim.c b/benchmarks/gem_wsim.c
index b05e9760f419..fe9535df75c6 100644
--- a/benchmarks/gem_wsim.c
+++ b/benchmarks/gem_wsim.c
@@ -310,7 +310,7 @@ parse_workload(struct w_arg *arg, unsigned int flags, struct workload *app_w)
 		if ((field = strtok_r(fstart, ".", &fctx)) != NULL) {
 			fstart = NULL;
 
-			if (!strcasecmp(field, "d")) {
+			if (!strcmp(field, "d")) {
 				if ((field = strtok_r(fstart, ".", &fctx)) !=
 				    NULL) {
 					tmp = atoi(field);
@@ -326,7 +326,7 @@ parse_workload(struct w_arg *arg, unsigned int flags, struct workload *app_w)
 					step.delay = tmp;
 					goto add_step;
 				}
-			} else if (!strcasecmp(field, "p")) {
+			} else if (!strcmp(field, "p")) {
 				if ((field = strtok_r(fstart, ".", &fctx)) !=
 				    NULL) {
 					tmp = atoi(field);
@@ -342,7 +342,7 @@ parse_workload(struct w_arg *arg, unsigned int flags, struct workload *app_w)
 					step.period = tmp;
 					goto add_step;
 				}
-			} else if (!strcasecmp(field, "s")) {
+			} else if (!strcmp(field, "s")) {
 				if ((field = strtok_r(fstart, ".", &fctx)) !=
 				    NULL) {
 					tmp = atoi(field);
@@ -359,7 +359,7 @@ parse_workload(struct w_arg *arg, unsigned int flags, struct workload *app_w)
 					step.target = tmp;
 					goto add_step;
 				}
-			} else if (!strcasecmp(field, "t")) {
+			} else if (!strcmp(field, "t")) {
 				if ((field = strtok_r(fstart, ".", &fctx)) !=
 				    NULL) {
 					tmp = atoi(field);
@@ -375,7 +375,7 @@ parse_workload(struct w_arg *arg, unsigned int flags, struct workload *app_w)
 					step.throttle = tmp;
 					goto add_step;
 				}
-			} else if (!strcasecmp(field, "q")) {
+			} else if (!strcmp(field, "q")) {
 				if ((field = strtok_r(fstart, ".", &fctx)) !=
 				    NULL) {
 					tmp = atoi(field);
@@ -391,7 +391,7 @@ parse_workload(struct w_arg *arg, unsigned int flags, struct workload *app_w)
 					step.throttle = tmp;
 					goto add_step;
 				}
-			} else if (!strcasecmp(field, "a")) {
+			} else if (!strcmp(field, "a")) {
 				if ((field = strtok_r(fstart, ".", &fctx)) !=
 				    NULL) {
 					tmp = atoi(field);
@@ -407,7 +407,7 @@ parse_workload(struct w_arg *arg, unsigned int flags, struct workload *app_w)
 					step.target = tmp;
 					goto add_step;
 				}
-			} else if (!strcasecmp(field, "f")) {
+			} else if (!strcmp(field, "f")) {
 				step.type = SW_FENCE;
 				goto add_step;
 			}
-- 
2.17.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[igt-dev] [PATH i-g-t 06/13] gem_wsim: Context priority support

[Tvrtko Ursulin]

From: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

A new workload command ('P') is added which enables per context dynamic
priority control.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
---
 benchmarks/gem_wsim.c  | 48 +++++++++++++++++++++++++++++++++++++++++-
 benchmarks/wsim/README | 18 ++++++++++++++++
 2 files changed, 65 insertions(+), 1 deletion(-)

diff --git a/benchmarks/gem_wsim.c b/benchmarks/gem_wsim.c
index fe9535df75c6..0c52ec567430 100644
--- a/benchmarks/gem_wsim.c
+++ b/benchmarks/gem_wsim.c
@@ -82,7 +82,8 @@ enum w_type
 	THROTTLE,
 	QD_THROTTLE,
 	SW_FENCE,
-	SW_FENCE_SIGNAL
+	SW_FENCE_SIGNAL,
+	CTX_PRIORITY
 };
 
 struct deps
@@ -114,6 +115,7 @@ struct w_step
 		int target;
 		int throttle;
 		int fence_signal;
+		int priority;
 	};
 
 	/* Implementation details */
@@ -162,6 +164,7 @@ struct workload
 	unsigned int nr_ctxs;
 	struct {
 		uint32_t id;
+		int priority;
 		unsigned int static_vcs;
 	} *ctx_list;
 
@@ -342,6 +345,36 @@ parse_workload(struct w_arg *arg, unsigned int flags, struct workload *app_w)
 					step.period = tmp;
 					goto add_step;
 				}
+			} else if (!strcmp(field, "P")) {
+				unsigned int nr = 0;
+				while ((field = strtok_r(fstart, ".", &fctx)) !=
+				    NULL) {
+					tmp = atoi(field);
+					if (tmp <= 0 && nr == 0) {
+						if (verbose)
+							fprintf(stderr,
+								"Invalid context at step %u!\n",
+								nr_steps);
+						return NULL;
+					}
+
+					if (nr == 0) {
+						step.context = tmp;
+					} else if (nr == 1) {
+						step.priority = tmp;
+					} else {
+						if (verbose)
+							fprintf(stderr,
+								"Invalid priority format at step %u!\n",
+								nr_steps);
+						return NULL;
+					}
+
+					nr++;
+				}
+
+				step.type = CTX_PRIORITY;
+				goto add_step;
 			} else if (!strcmp(field, "s")) {
 				if ((field = strtok_r(fstart, ".", &fctx)) !=
 				    NULL) {
@@ -1806,6 +1839,19 @@ static void *run_workload(void *data)
 				inc = cur_seqno - wrk->sync_seqno;
 				sw_sync_timeline_inc(wrk->sync_timeline, inc);
 				continue;
+			} else if (w->type == CTX_PRIORITY) {
+				if (w->priority != wrk->ctx_list[w->context].priority) {
+					struct drm_i915_gem_context_param param = {
+						.ctx_id = wrk->ctx_list[w->context].id,
+						.param = I915_CONTEXT_PARAM_PRIORITY,
+						.value = w->priority,
+					};
+
+					gem_context_set_param(fd, &param);
+					wrk->ctx_list[w->context].priority =
+								    w->priority;
+				}
+				continue;
 			}
 
 			if (do_sleep || w->type == PERIOD) {
diff --git a/benchmarks/wsim/README b/benchmarks/wsim/README
index 01766d37564f..fd9bff3401af 100644
--- a/benchmarks/wsim/README
+++ b/benchmarks/wsim/README
@@ -3,6 +3,7 @@ Workload descriptor format
 
 ctx.engine.duration_us.dependency.wait,...
 <uint>.<str>.<uint>[-<uint>].<int <= 0>[/<int <= 0>][...].<0|1>,...
+P.<uint>.<int>
 d|p|s|t|q|a.<int>,...
 f
 
@@ -22,6 +23,7 @@ Additional workload steps are also supported:
  'q' - Throttle to n max queue depth.
  'f' - Create a sync fence.
  'a' - Advance the previously created sync fence.
+ 'P' - Context priority.
 
 Engine ids: RCS, BCS, VCS, VCS1, VCS2, VECS
 
@@ -110,3 +112,19 @@ created at the second step. They are submitted ahead of time while still not
 runnable. When the second RCS batch completes the standalone fence is signaled
 which allows the two VCS batches to be executed. Finally we wait until the both
 VCS batches have completed before starting the (optional) next iteration.
+
+Context priority
+----------------
+
+  P.1.-1
+  1.RCS.1000.0.0
+  P.2.1
+  2.BCS.1000.-2.0
+
+Context 1 is marked as low priority (-1) and then a batch buffer is submitted
+against it. Context 2 is marked as high priority (1) and then a batch buffer
+is submitted against it which depends on the batch from context 1.
+
+Context priority command is executed at workload runtime and is valid until
+overriden by another (optional) same context priority change. Actual driver
+ioctls are executed only if the priority level has changed for the context.
-- 
2.17.1

_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev

[igt-dev] [PATH i-g-t 07/13] gem_wsim: Make batches preemptable by default

[Tvrtko Ursulin]

From: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

MI_NOOP cannot be preempted which means up to now gem_wsim workloads were
preemptable on batch buffer granularity only.

Add MI_ARB_CHK every 100us so the new default is mid-batch preemption.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
---
 benchmarks/gem_wsim.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/benchmarks/gem_wsim.c b/benchmarks/gem_wsim.c
index 0c52ec567430..7f2d0c83a0e7 100644
--- a/benchmarks/gem_wsim.c
+++ b/benchmarks/gem_wsim.c
@@ -685,6 +685,25 @@ static unsigned long get_bb_sz(unsigned int duration)
 		     nop_calibration_us, sizeof(uint32_t));
 }
 
+static void
+init_bb(struct w_step *w, unsigned int flags)
+{
+	/* Preemption point every 100us. */
+	const unsigned int arb_period = get_bb_sz(100) / sizeof(uint32_t);
+	unsigned int i;
+	uint32_t *ptr;
+
+	gem_set_domain(fd, w->bb_handle,
+		       I915_GEM_DOMAIN_WC, I915_GEM_DOMAIN_WC);
+
+	ptr = gem_mmap__wc(fd, w->bb_handle, 0, w->bb_sz, PROT_WRITE);
+
+	for (i = arb_period; i < w->bb_sz / sizeof(uint32_t); i += arb_period)
+		ptr[i] = 0x5 << 23; /* MI_ARB_CHK */
+
+	munmap(ptr, w->bb_sz);
+}
+
 static void
 terminate_bb(struct w_step *w, unsigned int flags)
 {
@@ -839,6 +858,7 @@ alloc_step_batch(struct workload *wrk, struct w_step *w, unsigned int flags)
 
 	w->bb_sz = get_bb_sz(w->duration.max);
 	w->bb_handle = w->obj[j].handle = gem_create(fd, w->bb_sz);
+	init_bb(w, flags);
 	terminate_bb(w, flags);
 
 	if (flags & SEQNO) {
-- 
2.17.1

_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev

Re: [igt-dev] [PATH i-g-t 07/13] gem_wsim: Make batches preemptable by default

[Chris Wilson]

Quoting Tvrtko Ursulin (2018-09-05 14:49:33)
> From: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
> 
> MI_NOOP cannot be preempted which means up to now gem_wsim workloads were
> preemptable on batch buffer granularity only.
> 
> Add MI_ARB_CHK every 100us so the new default is mid-batch preemption.

Sure you don't want this configurable to adjust between different
worklods? I'm just thinking that some of the fixed function stuff may
have vastly different preemption granularity.
-Chris
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev

[igt-dev] [PATH i-g-t 08/13] gem_wsim: Per context preemption point control

[Tvrtko Ursulin]

From: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

Allow workloads to specify frequency of preemption points per context.

New workload command ('X') is added to allow this.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
---
 benchmarks/gem_wsim.c  | 84 ++++++++++++++++++++++++++++++++++++++++--
 benchmarks/wsim/README | 18 ++++++++-
 2 files changed, 98 insertions(+), 4 deletions(-)

diff --git a/benchmarks/gem_wsim.c b/benchmarks/gem_wsim.c
index 7f2d0c83a0e7..6b128a1e9d57 100644
--- a/benchmarks/gem_wsim.c
+++ b/benchmarks/gem_wsim.c
@@ -83,7 +83,8 @@ enum w_type
 	QD_THROTTLE,
 	SW_FENCE,
 	SW_FENCE_SIGNAL,
-	CTX_PRIORITY
+	CTX_PRIORITY,
+	PREEMPTION
 };
 
 struct deps
@@ -122,6 +123,7 @@ struct w_step
 	unsigned int idx;
 	struct igt_list rq_link;
 	unsigned int request;
+	unsigned int preempt_us;
 
 	struct drm_i915_gem_execbuffer2 eb;
 	struct drm_i915_gem_exec_object2 *obj;
@@ -443,6 +445,42 @@ parse_workload(struct w_arg *arg, unsigned int flags, struct workload *app_w)
 			} else if (!strcmp(field, "f")) {
 				step.type = SW_FENCE;
 				goto add_step;
+			} else if (!strcmp(field, "X")) {
+				unsigned int nr = 0;
+				while ((field = strtok_r(fstart, ".", &fctx)) !=
+				    NULL) {
+					tmp = atoi(field);
+					if (tmp <= 0 && nr == 0) {
+						if (verbose)
+							fprintf(stderr,
+								"Invalid context at step %u!\n",
+								nr_steps);
+						return NULL;
+					} else if (tmp < 0 && nr == 1) {
+						if (verbose)
+							fprintf(stderr,
+								"Invalid preemption period at step %u!\n",
+								nr_steps);
+						return NULL;
+					}
+
+					if (nr == 0) {
+						step.context = tmp;
+					} else if (nr == 1) {
+						step.period = tmp;
+					} else {
+						if (verbose)
+							fprintf(stderr,
+								"Invalid preemption format at step %u!\n",
+								nr_steps);
+						return NULL;
+					}
+
+					nr++;
+				}
+
+				step.type = PREEMPTION;
+				goto add_step;
 			}
 
 			tmp = atoi(field);
@@ -688,11 +726,14 @@ static unsigned long get_bb_sz(unsigned int duration)
 static void
 init_bb(struct w_step *w, unsigned int flags)
 {
-	/* Preemption point every 100us. */
-	const unsigned int arb_period = get_bb_sz(100) / sizeof(uint32_t);
+	const unsigned int arb_period =
+			get_bb_sz(w->preempt_us) / sizeof(uint32_t);
 	unsigned int i;
 	uint32_t *ptr;
 
+	if (!arb_period)
+		return;
+
 	gem_set_domain(fd, w->bb_handle,
 		       I915_GEM_DOMAIN_WC, I915_GEM_DOMAIN_WC);
 
@@ -968,6 +1009,41 @@ prepare_workload(unsigned int id, struct workload *wrk, unsigned int flags)
 		}
 	}
 
+	/* Record default preemption. */
+	for (i = 0, w = wrk->steps; i < wrk->nr_steps; i++, w++) {
+		if (w->type == BATCH)
+			w->preempt_us = 100;
+	}
+
+	/*
+	 * Scan for contexts with modified preemption config and record their
+	 * preemption period for the following steps belonging to the same
+	 * context.
+	 */
+	for (i = 0, w = wrk->steps; i < wrk->nr_steps; i++, w++) {
+		struct w_step *w2;
+		int j;
+
+		if (w->type != PREEMPTION)
+			continue;
+
+		for (j = i + 1; j < wrk->nr_steps; j++) {
+			w2 = &wrk->steps[j];
+
+			if (w2->context != w->context)
+				continue;
+			else if (w2->type == PREEMPTION)
+				break;
+			else if (w2->type != BATCH)
+				continue;
+
+			w2->preempt_us = w->period;
+		}
+	}
+
+	/*
+	 * Allocate batch buffers.
+	 */
 	for (i = 0, w = wrk->steps; i < wrk->nr_steps; i++, w++) {
 		unsigned int _flags = flags;
 		enum intel_engine_id engine = w->engine;
@@ -1872,6 +1948,8 @@ static void *run_workload(void *data)
 								    w->priority;
 				}
 				continue;
+			} else if (w->type == PREEMPTION) {
+				continue;
 			}
 
 			if (do_sleep || w->type == PERIOD) {
diff --git a/benchmarks/wsim/README b/benchmarks/wsim/README
index fd9bff3401af..205cd6c93afb 100644
--- a/benchmarks/wsim/README
+++ b/benchmarks/wsim/README
@@ -3,7 +3,7 @@ Workload descriptor format
 
 ctx.engine.duration_us.dependency.wait,...
 <uint>.<str>.<uint>[-<uint>].<int <= 0>[/<int <= 0>][...].<0|1>,...
-P.<uint>.<int>
+P|X.<uint>.<int>
 d|p|s|t|q|a.<int>,...
 f
 
@@ -24,6 +24,7 @@ Additional workload steps are also supported:
  'f' - Create a sync fence.
  'a' - Advance the previously created sync fence.
  'P' - Context priority.
+ 'X' - Context preemption control.
 
 Engine ids: RCS, BCS, VCS, VCS1, VCS2, VECS
 
@@ -128,3 +129,18 @@ is submitted against it which depends on the batch from context 1.
 Context priority command is executed at workload runtime and is valid until
 overriden by another (optional) same context priority change. Actual driver
 ioctls are executed only if the priority level has changed for the context.
+
+Context preemption control
+--------------------------
+
+  X.1.0
+  1.RCS.1000.0.0
+  X.1.500
+  1.RCS.1000.0.0
+
+Context 1 is marked as non-preemptable batches and a batch is sent against 1.
+The same context is then marked to have batches which can be preempted every
+500us and another batch is submitted.
+
+Same as with context priority, context preemption commands are valid until
+optionally overriden by another preemption control change on the same context.
-- 
2.17.1

_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev

Re: [igt-dev] [PATH i-g-t 08/13] gem_wsim: Per context preemption point control

[Chris Wilson]

Quoting Tvrtko Ursulin (2018-09-05 14:49:34)
> From: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
> 
> Allow workloads to specify frequency of preemption points per context.
> 
> New workload command ('X') is added to allow this.

Called it! ;)
-Chris
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev

Re: [Intel-gfx] [igt-dev] [PATH i-g-t 08/13] gem_wsim: Per context preemption point control

[Chris Wilson]

Quoting Chris Wilson (2018-09-07 09:49:09)
> Quoting Tvrtko Ursulin (2018-09-05 14:49:34)
> > From: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
> > 
> > Allow workloads to specify frequency of preemption points per context.
> > 
> > New workload command ('X') is added to allow this.
> 
> Called it! ;)

With muttering under my breath about .wsim, you can have a
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
for all the gem_wsim bits. All the .pl updates I read, look fine, but I
haven't taken the time to contemplate if they are correct, so for the
rest of the series,
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
-Chris
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] [PATH i-g-t 09/13] media-bench: Update for engine=class:instance tracepoints

[Tvrtko Ursulin]

From: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
---
 scripts/media-bench.pl | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/scripts/media-bench.pl b/scripts/media-bench.pl
index 375844d9cdf6..a3619ceb34cc 100755
--- a/scripts/media-bench.pl
+++ b/scripts/media-bench.pl
@@ -187,7 +187,7 @@ sub trace_workload
 	open CMD, "$cmd |" or die;
 	while (<CMD>) {
 		chomp;
-		if (/Ring(\d+): (\d+) batches.*?(\d+\.?\d+)% idle,/) {
+		if (/Ring(\S+): (\d+) batches.*?(\d+\.?\d+)% idle,/) {
 			if ($2 >= $min_batches) {
 				$engines{$1} = $3;
 			} else {
@@ -542,7 +542,7 @@ foreach my $wrk (@workloads) {
 	my ($r, $error, $c, $wps, $swps);
 	my $saturated = 0;
 	my $result = 'Pass';
-	my $vcs2 = $gt2 ? '1' : '3';
+	my $vcs2 = $gt2 ? '1:0' : '2:1';
 	my %problem;
 	my $engines;
 
@@ -575,11 +575,11 @@ foreach my $wrk (@workloads) {
 	if ($saturated == 0) {
 		# Not a single saturated engine
 		$result = 'FAIL';
-	} elsif (not exists $engines->{'2'} or not exists $engines->{$vcs2}) {
+	} elsif (not exists $engines->{'2:0'} or not exists $engines->{$vcs2}) {
 		# VCS1 and VCS2 not present in a balancing workload
 		$result = 'FAIL';
 	} elsif ($saturated == 1 and
-		 ($engines->{'2'} < $idle_tolerance_pct or
+		 ($engines->{'2:0'} < $idle_tolerance_pct or
 		  $engines->{$vcs2} < $idle_tolerance_pct)) {
 		# Only one VCS saturated
 		$result = 'WARN';
-- 
2.17.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] [PATH i-g-t 10/13] media-bench: Protect against incorrect -b syntax

[Tvrtko Ursulin]

From: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

-b is to pass the command argument directly to gem_wsim so must include
another -b.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
---
 scripts/media-bench.pl | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/scripts/media-bench.pl b/scripts/media-bench.pl
index a3619ceb34cc..5070cae088f3 100755
--- a/scripts/media-bench.pl
+++ b/scripts/media-bench.pl
@@ -341,7 +341,10 @@ ENDHELP
 $verbose = 1 if defined $opts{'v'};
 $gt2 = 1 if defined $opts{'2'};
 $show_cmds = 1 if defined $opts{'x'};
-$balancer = $opts{'b'} if defined $opts{'b'};
+if (defined $opts{'b'}) {
+	die unless substr($opts{'b'}, 0, 2) eq '-b';
+	$balancer = $opts{'b'};
+}
 if (defined $opts{'B'}) {
 	@balancers = split /,/, $opts{'B'};
 } else {
-- 
2.17.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[igt-dev] [PATH i-g-t 11/13] media-bench: Fix tracing of direct workloads

[Tvrtko Ursulin]

From: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

Build argument list properly and check exit codes when executing
sub-commands.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
---
 scripts/media-bench.pl | 54 +++++++++++++++++++++++++++---------------
 1 file changed, 35 insertions(+), 19 deletions(-)

diff --git a/scripts/media-bench.pl b/scripts/media-bench.pl
index 5070cae088f3..9bf8c8789fe2 100755
--- a/scripts/media-bench.pl
+++ b/scripts/media-bench.pl
@@ -131,7 +131,8 @@ sub add_wps_arg
 	return @args if $realtime_target <= 0;
 
 	$period = int(1000000 / $realtime_target);
-	push @args, "-a p.$period";
+	push @args, '-a';
+	push @args, 'p.$period';
 
 	return @args;
 }
@@ -144,7 +145,7 @@ sub run_workload
 	@args = add_wps_arg(@args);
 	push @args, '-2' if $gt2;
 
-	unshift @args, "$wsim";
+	unshift @args, $wsim;
 	$cmd = join ' ', @args;
 	show_cmd($cmd);
 
@@ -164,23 +165,31 @@ sub run_workload
 sub trace_workload
 {
 	my ($wrk, $b, $r, $c) = @_;
-	my @args = ( "-n $nop", "-r $r", "-c $c");
+	my @args = ($tracepl, '--trace', $wsim, '-q', '-n', $nop, '-r', $r, '-c', $c);
 	my $min_batches = 16 + $r * $c / 2;
 	my @skip_engine;
 	my %engines;
 	my ($cmd, $file);
-	my $warg = defined $w_direct ? $wrk : "-w $wrk_root/$wrk";
 
-	push @args, "$b -R" unless $b eq '<none>';
 	push @args, '-2' if $gt2;
-	push @args, $warg;
 
-	unshift @args, '-q';
-	unshift @args, "$tracepl --trace $wsim";
+	unless ($b eq '<none>') {
+		push @args, '-R';
+		push @args, split /\s+/, $b;
+	}
 
-	$cmd = join ' ', @args;
-	show_cmd($cmd);
-	system($cmd);
+	if (defined $w_direct) {
+		push @args, split /\s+/, $wrk;
+	} else {
+		push @args, '-w';
+		push @args, $wrk_root . '/' . $wrk;
+	}
+
+	show_cmd(join ' ', @args);
+	if (-e 'perf.data') {
+		unlink 'perf.data' or die;
+	}
+	system(@args) == 0 or die;
 
 	$cmd = "perf script | $tracepl";
 	show_cmd($cmd);
@@ -205,13 +214,13 @@ sub trace_workload
 
 	$cmd = "perf script > ${file}.trace";
 	show_cmd($cmd);
-	system($cmd);
+	system($cmd) == 0 or die;
 
 	$cmd = "perf script | $tracepl --html -x ctxsave -s -c ";
 	$cmd .= join ' ', map("-i $_", @skip_engine);
 	$cmd .= " > ${file}.html";
 	show_cmd($cmd);
-	system($cmd);
+	system($cmd) == 0 or die;
 
 	return \%engines;
 }
@@ -219,7 +228,6 @@ sub trace_workload
 sub calibrate_workload
 {
 	my ($wrk) = @_;
-	my $warg = defined $w_direct ? $wrk : "-w $wrk_root/$wrk";
 	my $tol = $tolerance;
 	my $loops = 0;
 	my $error;
@@ -227,9 +235,16 @@ sub calibrate_workload
 
 	$r = $realtime_target > 0 ? $realtime_target * $client_target_s : 23;
 	for (;;) {
-		my @args = ( "-n $nop", "-r $r", $warg);
+		my @args = ('-n', $nop, '-r', $r);
 		my ($time, $wps);
 
+		if (defined $w_direct) {
+			push @args, split /\s+/, $wrk;
+		} else {
+			push @args, '-w';
+			push @args, $wrk_root . '/' . $wrk;
+		}
+
 		($time, $wps) = run_workload(@args);
 
 		$error = abs($time - $client_target_s) / $client_target_s;
@@ -254,23 +269,24 @@ sub find_saturation_point
 	my ($last_wps, $c, $swps);
 	my $target = $realtime_target > 0 ? $realtime_target : $wps_target;
 	my $r = $rr;
-	my ($warg, $wcnt);
+	my $wcnt;
 	my $maxc;
 	my $max = 0;
 
 	if (defined $w_direct) {
-		$warg = $wrk;
+		push @args, split /\s+/, $wrk;
 		$wcnt = () = $wrk =~ /-[wW]/gi;
 
 	} else {
-		$warg = "-w $wrk_root/$wrk";
+		push @args, '-w';
+		push @args, $wrk_root . '/' . $wrk;
 		$wcnt = 1;
 	}
 
 	for ($c = 1; ; $c = $c + 1) {
 		my ($time, $wps);
 
-		($time, $wps) = run_workload((@args, ($warg, "-r $r", "-c $c")));
+		($time, $wps) = run_workload((@args, ('-r', $r, '-c', $c)));
 
 		say "        $c clients is $wps wps." if $verbose;
 
-- 
2.17.1

_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev

[igt-dev] [PATH i-g-t 12/13] media-bench: Write out trace files directly.

[Tvrtko Ursulin]

From: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

Instead of relying on shell redirection.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
---
 scripts/media-bench.pl | 24 ++++++++++++++++++------
 1 file changed, 18 insertions(+), 6 deletions(-)

diff --git a/scripts/media-bench.pl b/scripts/media-bench.pl
index 9bf8c8789fe2..77e75c78b113 100755
--- a/scripts/media-bench.pl
+++ b/scripts/media-bench.pl
@@ -162,6 +162,21 @@ sub run_workload
 	return ($time, $wps);
 }
 
+sub dump_cmd
+{
+	my ($cmd, $file) = @_;
+
+	show_cmd("$cmd > $file");
+
+	open FOUT, '>', $file or die;
+	open TIN, "$cmd |" or die;
+	while (<TIN>) {
+		print FOUT $_;
+	}
+	close TIN;
+	close FOUT;
+}
+
 sub trace_workload
 {
 	my ($wrk, $b, $r, $c) = @_;
@@ -212,15 +227,12 @@ sub trace_workload
 	$b =~ s/[ <>]/_/g;
 	$file = "${wrk}_${b}_-r${r}_-c${c}";
 
-	$cmd = "perf script > ${file}.trace";
-	show_cmd($cmd);
-	system($cmd) == 0 or die;
+	dump_cmd('perf script', "${file}.trace");
 
 	$cmd = "perf script | $tracepl --html -x ctxsave -s -c ";
 	$cmd .= join ' ', map("-i $_", @skip_engine);
-	$cmd .= " > ${file}.html";
-	show_cmd($cmd);
-	system($cmd) == 0 or die;
+
+	dump_cmd($cmd, "${file}.html");
 
 	return \%engines;
 }
-- 
2.17.1

_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev

[igt-dev] [PATH i-g-t 13/13] media-bench: Add mixed mode evaluation

[Tvrtko Ursulin]

From: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

Mixed mode (-m) enables evaluation of different workload sets against one
or more load balancing strategies.

Contrary to the default mode which runs all selected workloads serialy,
mixed mode runs a second stage where they are all run in parallel. The
performance difference between the two passes is then used for the scoring
metric.

First metric is the normalized aggregate throughput, and second is
balancer "fairness" as approximated by throughput achieved in mixed mode,
relative to the best individual balancer for each workload.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
---
 scripts/media-bench.pl | 150 +++++++++++++++++++++++++++++++++--------
 1 file changed, 121 insertions(+), 29 deletions(-)

diff --git a/scripts/media-bench.pl b/scripts/media-bench.pl
index 77e75c78b113..066b542f95df 100755
--- a/scripts/media-bench.pl
+++ b/scripts/media-bench.pl
@@ -41,6 +41,8 @@ my $show_cmds = 0;
 my $realtime_target = 0;
 my $wps_target = 0;
 my $wps_target_param = 0;
+my $multi_mode = 0;
+my @multi_workloads;
 my $w_direct;
 my $balancer;
 my $nop;
@@ -141,6 +143,7 @@ sub run_workload
 {
 	my (@args) = @_;
 	my ($time, $wps, $cmd);
+	my @ret;
 
 	@args = add_wps_arg(@args);
 	push @args, '-2' if $gt2;
@@ -155,11 +158,13 @@ sub run_workload
 		if (/^(\d+\.\d+)s elapsed \((\d+\.?\d+) workloads\/s\)$/) {
 			$time = $1;
 			$wps = $2;
+		} elsif (/(\d+)\: \d+\.\d+s elapsed \(\d+ cycles, (\d+\.?\d+) workloads\/s\)/) {
+			$ret[$1] = $2;
 		}
 	}
 	close WSIM;
 
-	return ($time, $wps);
+	return ($time, $wps, \@ret);
 }
 
 sub dump_cmd
@@ -223,7 +228,11 @@ sub trace_workload
 	}
 	close CMD;
 
-	$wrk =~ s/ /_/g;
+	$wrk =~ s/$wrk_root//g;
+	$wrk =~ s/\.wsim//g;
+	$wrk =~ s/-w/W/g;
+	$wrk =~ s/[ -]/_/g;
+	$wrk =~ s/\//-/g;
 	$b =~ s/[ <>]/_/g;
 	$file = "${wrk}_${b}_-r${r}_-c${c}";
 
@@ -259,6 +268,7 @@ sub calibrate_workload
 
 		($time, $wps) = run_workload(@args);
 
+		$wps = $r / $time if $w_direct;
 		$error = abs($time - $client_target_s) / $client_target_s;
 
 		last if $error <= $tol;
@@ -278,13 +288,15 @@ sub calibrate_workload
 sub find_saturation_point
 {
 	my ($wrk, $rr, $verbose, @args) = @_;
-	my ($last_wps, $c, $swps);
+	my ($last_wps, $c, $swps, $wwps);
 	my $target = $realtime_target > 0 ? $realtime_target : $wps_target;
 	my $r = $rr;
 	my $wcnt;
 	my $maxc;
 	my $max = 0;
 
+	push @args, '-v' if $multi_mode and $w_direct;
+
 	if (defined $w_direct) {
 		push @args, split /\s+/, $wrk;
 		$wcnt = () = $wrk =~ /-[wW]/gi;
@@ -297,8 +309,9 @@ sub find_saturation_point
 
 	for ($c = 1; ; $c = $c + 1) {
 		my ($time, $wps);
+		my @args_ = (@args, ('-r', $r, '-c', $c));
 
-		($time, $wps) = run_workload((@args, ('-r', $r, '-c', $c)));
+		($time, $wps, $wwps) = run_workload(@args_);
 
 		say "        $c clients is $wps wps." if $verbose;
 
@@ -324,21 +337,23 @@ sub find_saturation_point
 			$r = int($rr * ($client_target_s / $time));
 		} elsif ($c == 1) {
 			$swps = $wps;
-			return ($c, $wps, $swps) if $wcnt > 1 or
-						    ($wps_target_param < 0 and $wps_target == 0);
+			return ($c, $wps, $swps, $wwps) if $wcnt > 1 or
+							   $multi_mode or
+							   ($wps_target_param < 0 and
+							    $wps_target == 0);
 		}
 
 		$last_wps = $wps;
 	}
 
 	if ($target <= 0) {
-		return ($maxc, $max, $swps);
+		return ($maxc, $max, $swps, $wwps);
 	} else {
-		return ($c - 1, $last_wps, $swps);
+		return ($c - 1, $last_wps, $swps, $wwps);
 	}
 }
 
-getopts('hv2xn:b:W:B:r:t:i:R:T:w:', \%opts);
+getopts('hv2xmn:b:W:B:r:t:i:R:T:w:', \%opts);
 
 if (defined $opts{'h'}) {
 	print <<ENDHELP;
@@ -360,8 +375,11 @@ Supported options:
   -R wps      Run workloads in the real-time mode at wps rate.
   -T wps      Calibrate up to wps/client target instead of GPU saturation.
               Negative values set the target based on the single client
-	      performance where target = single-client-wps / -N.
+              performance where target = single-client-wps / -N.
   -w str      Pass-through to gem_wsim. Overrides normal workload selection.
+  -m          Multi-workload mode. All selected workloads will be run in
+              parallel and overal score will be relative to when run
+              individually.
 ENDHELP
 	exit 0;
 }
@@ -369,6 +387,7 @@ ENDHELP
 $verbose = 1 if defined $opts{'v'};
 $gt2 = 1 if defined $opts{'2'};
 $show_cmds = 1 if defined $opts{'x'};
+$multi_mode = 1 if defined $opts{'m'};
 if (defined $opts{'b'}) {
 	die unless substr($opts{'b'}, 0, 2) eq '-b';
 	$balancer = $opts{'b'};
@@ -387,7 +406,13 @@ $wps_target = $opts{'T'} if defined $opts{'T'};
 $wps_target_param = $wps_target;
 $w_direct = $opts{'w'} if defined $opts{'w'};
 
-@workloads =  ($w_direct ) if defined $w_direct;
+if ($multi_mode) {
+	die if $w_direct; # Not supported
+	@multi_workloads = @workloads;
+}
+
+@workloads = ($w_direct) if defined $w_direct;
+
 say "Workloads:";
 print map { "  $_\n" } @workloads;
 print "Balancers: ";
@@ -396,13 +421,14 @@ say "Target workload duration is ${client_target_s}s.";
 say "Calibration tolerance is $tolerance.";
 say "Real-time mode at ${realtime_target} wps." if $realtime_target > 0;
 say "Wps target is ${wps_target} wps." if $wps_target > 0;
+say "Multi-workload mode." if $multi_mode;
 $nop = $opts{'n'};
 $nop = calibrate_nop() unless $nop;
 say "Nop calibration is $nop.";
 
 goto VERIFY if defined $balancer;
 
-my %best_bal;
+my (%best_bal, %best_bid);
 my %results;
 my %scores;
 my %wscores;
@@ -438,13 +464,22 @@ sub add_points
 	}
 }
 
-foreach my $wrk (@workloads) {
+my @saturation_workloads = $multi_mode ? @multi_workloads : @workloads;
+my %allwps;
+my $widx = 0;
+
+push @saturation_workloads, '-w ' . join ' -w ', map("$wrk_root/$_", @workloads)
+     if $multi_mode;
+
+foreach my $wrk (@saturation_workloads) {
 	my @args = ( "-n $nop");
 	my ($r, $error, $should_b, $best);
 	my (%wps, %cwps, %mwps);
 	my @sorted;
 	my $range;
 
+	$w_direct = $wrk if $multi_mode and $widx == $#saturation_workloads;
+
 	$should_b = 1;
 	$should_b = can_balance_workload($wrk) unless defined $w_direct;
 
@@ -459,7 +494,7 @@ foreach my $wrk (@workloads) {
 		GBAL: foreach my $G ('', '-G', '-d', '-G -d') {
 			foreach my $H ('', '-H') {
 				my @xargs;
-				my ($w, $c, $s);
+				my ($w, $c, $s, $bwwps);
 				my $bid;
 
 				if ($bal ne '') {
@@ -476,21 +511,67 @@ foreach my $wrk (@workloads) {
 
 				$wps_target = 0 if $wps_target_param < 0;
 
-				($c, $w, $s) = find_saturation_point($wrk, $r,
-								     0,
-								     (@args,
-								      @xargs));
+				($c, $w, $s, $bwwps) =
+					find_saturation_point($wrk, $r, 0,
+							      (@args, @xargs));
 
 				if ($wps_target_param < 0) {
 					$wps_target = $s / -$wps_target_param;
 
-					($c, $w, $s) =
+					($c, $w, $s, $bwwps) =
 						find_saturation_point($wrk, $r,
 								      0,
 								      (@args,
 								       @xargs));
 				}
 
+				if ($multi_mode and $w_direct) {
+					my $widx;
+
+					die unless scalar(@multi_workloads) ==
+						   scalar(@{$bwwps});
+					die unless scalar(@multi_workloads) ==
+						   scalar(keys %allwps);
+
+					# Total of all workload wps from the
+					# mixed run.
+					$w = 0;
+					foreach $widx (0..$#{$bwwps}) {
+						$w += $bwwps->[$widx];
+					}
+
+					# Total of all workload wps from when
+					# ran individually with the best
+					# balancer.
+					my $tot = 0;
+					foreach my $wrk (@multi_workloads) {
+						$tot += $allwps{$wrk}->{$best_bid{$wrk}};
+					}
+
+					# Normalize mixed sum with sum of
+					# individual runs.
+					$w *= 100;
+					$w /= $tot;
+
+					# Second metric is average of each
+					# workload wps normalized by their
+					# individual run performance with the
+					# best balancer.
+					$s = 0;
+					$widx = 0;
+					foreach my $wrk (@multi_workloads) {
+						$s += 100 * $bwwps->[$widx] /
+						      $allwps{$wrk}->{$best_bid{$wrk}};
+						$widx++;
+					}
+					$s /= scalar(@multi_workloads);
+
+					say sprintf('Aggregate (normalized) %.2f%%; fairness %.2f%%',
+						    $w, $s);
+				} else {
+					$allwps{$wrk} = \%wps;
+				}
+
 				$wps{$bid} = $w;
 				$cwps{$bid} = $s;
 
@@ -500,7 +581,8 @@ foreach my $wrk (@workloads) {
 					$mwps{$bid} = $w + $s;
 				}
 
-				say "$c clients ($w wps, $s wps single client, score=$mwps{$bid}).";
+				say "$c clients ($w wps, $s wps single client, score=$mwps{$bid})."
+				    unless $multi_mode and $w_direct;
 
 				last BAL unless $should_b;
 				next BAL if $bal eq '';
@@ -509,19 +591,24 @@ foreach my $wrk (@workloads) {
 		}
 	}
 
+	$widx++;
+
 	@sorted = sort { $mwps{$b} <=> $mwps{$a} } keys %mwps;
-	$best = $sorted[0];
+	$best_bid{$wrk} = $sorted[0];
 	@sorted = sort { $b <=> $a } values %mwps;
 	$range = 1 - $sorted[-1] / $sorted[0];
 	$best_bal{$wrk} = $sorted[0];
-	say "  Best balancer is '$best' (range=$range).";
+
+	next if $multi_mode and not $w_direct;
+
+	say "  Best balancer is '$best_bid{$wrk}' (range=$range).";
 
 
 	$results{$wrk} = \%mwps;
 
 	add_points(\%wps, \%scores, \%wscores);
-	add_points(\%cwps, \%cscores, \%cwscores);
 	add_points(\%mwps, \%mscores, \%mwscores);
+	add_points(\%cwps, \%cscores, \%cwscores);
 }
 
 sub dump_scoreboard
@@ -552,12 +639,12 @@ sub dump_scoreboard
 	return $balancer;
 }
 
-dump_scoreboard('Total wps', \%scores);
-dump_scoreboard('Total weighted wps', \%wscores);
-dump_scoreboard('Per client wps', \%cscores);
-dump_scoreboard('Per client weighted wps', \%cwscores);
-dump_scoreboard('Combined wps', \%mscores);
-$balancer = dump_scoreboard('Combined weighted wps', \%mwscores);
+dump_scoreboard($multi_mode ? 'Throughput' : 'Total wps', \%scores);
+dump_scoreboard('Total weighted wps', \%wscores) unless $multi_mode;
+dump_scoreboard($multi_mode ? 'Fairness' : 'Per client wps', \%cscores);
+dump_scoreboard('Per client weighted wps', \%cwscores) unless $multi_mode;
+$balancer = dump_scoreboard($multi_mode ? 'Combined' : 'Combined wps', \%mscores);
+$balancer = dump_scoreboard('Combined weighted wps', \%mwscores) unless $multi_mode;
 
 VERIFY:
 
@@ -568,6 +655,11 @@ die unless defined $balancer;
 say "\nBalancer is '$balancer'.";
 say "Idleness tolerance is $idle_tolerance_pct%.";
 
+if ($multi_mode) {
+	$w_direct = '-w ' . join ' -w ', map("$wrk_root/$_", @workloads);
+	@workloads = ($w_direct);
+}
+
 foreach my $wrk (@workloads) {
 	my @args = ( "-n $nop" );
 	my ($r, $error, $c, $wps, $swps);
-- 
2.17.1

_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev

[igt-dev] ✓ Fi.CI.BAT: success for Tracing & workload simulation misc patches

[Patchwork]

== Series Details ==

Series: Tracing & workload simulation misc patches
URL   : https://patchwork.freedesktop.org/series/49183/
State : success

== Summary ==

= CI Bug Log - changes from CI_DRM_4770 -> IGTPW_1792 =

== Summary - WARNING ==

  Minor unknown changes coming with IGTPW_1792 need to be verified
  manually.
  
  If you think the reported changes have nothing to do with the changes
  introduced in IGTPW_1792, please notify your bug team to allow them
  to document this new failure mode, which will reduce false positives in CI.

  External URL: https://patchwork.freedesktop.org/api/1.0/series/49183/revisions/1/mbox/

== Possible new issues ==

  Here are the unknown changes that may have been introduced in IGTPW_1792:

  === IGT changes ===

    ==== Warnings ====

    igt@pm_rpm@module-reload:
      fi-hsw-4770r:       SKIP -> PASS

    
== Known issues ==

  Here are the changes found in IGTPW_1792 that come from known issues:

  === IGT changes ===

    ==== Issues hit ====

    igt@gem_exec_suspend@basic-s3:
      fi-skl-caroline:    NOTRUN -> INCOMPLETE (fdo#104108, fdo#107556)

    igt@kms_psr@primary_page_flip:
      fi-icl-u:           NOTRUN -> FAIL (fdo#107383) +3

    
    ==== Possible fixes ====

    igt@drv_module_reload@basic-reload-inject:
      fi-hsw-4770r:       DMESG-WARN (fdo#107425) -> PASS

    igt@gem_exec_suspend@basic-s4-devices:
      fi-kbl-7500u:       DMESG-WARN (fdo#105128, fdo#107139) -> PASS

    igt@kms_frontbuffer_tracking@basic:
      fi-byt-clapper:     FAIL (fdo#103167) -> PASS

    igt@prime_vgem@basic-fence-flip:
      fi-ilk-650:         FAIL (fdo#104008) -> PASS

    
  fdo#103167 https://bugs.freedesktop.org/show_bug.cgi?id=103167
  fdo#104008 https://bugs.freedesktop.org/show_bug.cgi?id=104008
  fdo#104108 https://bugs.freedesktop.org/show_bug.cgi?id=104108
  fdo#105128 https://bugs.freedesktop.org/show_bug.cgi?id=105128
  fdo#107139 https://bugs.freedesktop.org/show_bug.cgi?id=107139
  fdo#107383 https://bugs.freedesktop.org/show_bug.cgi?id=107383
  fdo#107425 https://bugs.freedesktop.org/show_bug.cgi?id=107425
  fdo#107556 https://bugs.freedesktop.org/show_bug.cgi?id=107556


== Participating hosts (50 -> 49) ==

  Additional (4): fi-glk-j4005 fi-skl-caroline fi-icl-u fi-elk-e7500 
  Missing    (5): fi-ctg-p8600 fi-ilk-m540 fi-byt-squawks fi-bsw-cyan fi-hsw-4200u 


== Build changes ==

    * IGT: IGT_4627 -> IGTPW_1792

  CI_DRM_4770: 0c3535cf60140d017a5df73d84d06e8b1a5b5d3b @ git://anongit.freedesktop.org/gfx-ci/linux
  IGTPW_1792: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_1792/
  IGT_4627: e0c3033a57d85c0d2eb33af0451afa16edc79f10 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_1792/issues.html
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev

[igt-dev] ✓ Fi.CI.IGT: success for Tracing & workload simulation misc patches

[Patchwork]

== Series Details ==

Series: Tracing & workload simulation misc patches
URL   : https://patchwork.freedesktop.org/series/49183/
State : success

== Summary ==

= CI Bug Log - changes from IGT_4627_full -> IGTPW_1792_full =

== Summary - SUCCESS ==

  No regressions found.

  External URL: https://patchwork.freedesktop.org/api/1.0/series/49183/revisions/1/mbox/

== Known issues ==

  Here are the changes found in IGTPW_1792_full that come from known issues:

  === IGT changes ===

    ==== Issues hit ====

    igt@gem_exec_bad_domains@double-write-domain:
      shard-snb:          PASS -> INCOMPLETE (fdo#105411)

    igt@gem_ppgtt@blt-vs-render-ctx0:
      shard-kbl:          PASS -> INCOMPLETE (fdo#103665, fdo#106023)

    igt@kms_cursor_legacy@2x-long-nonblocking-modeset-vs-cursor-atomic:
      shard-glk:          NOTRUN -> FAIL (fdo#105454, fdo#106509)

    igt@kms_rotation_crc@primary-rotation-180:
      shard-snb:          PASS -> FAIL (fdo#103925)

    igt@testdisplay:
      shard-glk:          PASS -> INCOMPLETE (k.org#198133, fdo#107093, fdo#103359)

    
    ==== Possible fixes ====

    igt@kms_plane@pixel-format-pipe-a-planes:
      shard-snb:          FAIL (fdo#107749) -> PASS

    igt@kms_plane_multiple@atomic-pipe-a-tiling-x:
      shard-snb:          FAIL (fdo#103166) -> PASS

    igt@kms_rotation_crc@sprite-rotation-180:
      shard-snb:          FAIL (fdo#103925) -> PASS

    igt@perf@buffer-fill:
      shard-kbl:          INCOMPLETE (fdo#103665) -> PASS

    igt@prime_vgem@basic-write:
      shard-snb:          INCOMPLETE (fdo#105411) -> PASS

    
  fdo#103166 https://bugs.freedesktop.org/show_bug.cgi?id=103166
  fdo#103359 https://bugs.freedesktop.org/show_bug.cgi?id=103359
  fdo#103665 https://bugs.freedesktop.org/show_bug.cgi?id=103665
  fdo#103925 https://bugs.freedesktop.org/show_bug.cgi?id=103925
  fdo#105411 https://bugs.freedesktop.org/show_bug.cgi?id=105411
  fdo#105454 https://bugs.freedesktop.org/show_bug.cgi?id=105454
  fdo#106023 https://bugs.freedesktop.org/show_bug.cgi?id=106023
  fdo#106509 https://bugs.freedesktop.org/show_bug.cgi?id=106509
  fdo#107093 https://bugs.freedesktop.org/show_bug.cgi?id=107093
  fdo#107749 https://bugs.freedesktop.org/show_bug.cgi?id=107749
  k.org#198133 https://bugzilla.kernel.org/show_bug.cgi?id=198133


== Participating hosts (5 -> 5) ==

  No changes in participating hosts


== Build changes ==

    * IGT: IGT_4627 -> IGTPW_1792
    * Linux: CI_DRM_4767 -> CI_DRM_4770

  CI_DRM_4767: e9b69bafd3c2c13a8b9fa8e7a410f5d5ef32e328 @ git://anongit.freedesktop.org/gfx-ci/linux
  CI_DRM_4770: 0c3535cf60140d017a5df73d84d06e8b1a5b5d3b @ git://anongit.freedesktop.org/gfx-ci/linux
  IGTPW_1792: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_1792/
  IGT_4627: e0c3033a57d85c0d2eb33af0451afa16edc79f10 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_1792/shards.html
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev