public inbox for igt-dev@lists.freedesktop.org
 help / color / mirror / Atom feed
From: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
To: igt-dev@lists.freedesktop.org
Subject: [igt-dev] [CI 14/16] chamelium: Add format support
Date: Mon,  8 Oct 2018 17:04:31 +0300	[thread overview]
Message-ID: <20181008140433.32399-14-arkadiusz.hiler@intel.com> (raw)
In-Reply-To: <20181008140433.32399-1-arkadiusz.hiler@intel.com>

From: Maxime Ripard <maxime.ripard@bootlin.com>

In order to introduce CRC subtests for DRM formats, we need to take an
intermediate step.

The current code will generate a pattern in XR24, and will try to compare
the CRC returned by the Chamelium for each frames.

This CRC is computed on an XR24 format as well, so it works. However, as
soon as we will start implementing other formats, if we just change the
format of the pattern, the raw content of the buffer, and therefore the
CRC's won't match anymore.

In order to address that, we will need an intermediate step, and we will
now still create the XR24 pattern, and compute its CRC, then convert it to
the format we want to test, and finally retrieve the CRC from the Chamelium
to compare it with the one from the XR24 pattern.

The current code is converted to the new prototype that will take the
fourcc of the format to test, even though we're still using XR24 everywhere
for now.

Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
 tests/kms_chamelium.c | 37 ++++++++++++++++++++++++-------------
 1 file changed, 24 insertions(+), 13 deletions(-)

diff --git a/tests/kms_chamelium.c b/tests/kms_chamelium.c
index d6d0f315..0c082f9c 100644
--- a/tests/kms_chamelium.c
+++ b/tests/kms_chamelium.c
@@ -524,22 +524,26 @@ static int chamelium_get_pattern_fb(data_t *data, drmModeModeInfo *mode,
 
 static void do_test_display_crc(data_t *data, struct chamelium_port *port,
 				igt_output_t *output, drmModeModeInfo *mode,
-				int count)
+				uint32_t fourcc, int count)
 {
 	igt_crc_t *crc;
 	igt_crc_t *expected_crc;
 	struct chamelium_fb_crc_async_data *fb_crc;
-	struct igt_fb fb;
+	struct igt_fb frame_fb, fb;
 	int i, fb_id, captured_frame_count;
+	int frame_id;
 
 	fb_id = chamelium_get_pattern_fb(data, mode,
 					 DRM_FORMAT_XRGB8888, &fb);
 	igt_assert(fb_id > 0);
 
+	frame_id = igt_fb_convert(&frame_fb, &fb, fourcc);
+	igt_assert(frame_id > 0);
+
 	fb_crc = chamelium_calculate_fb_crc_async_start(data->drm_fd,
 							&fb);
 
-	enable_output(data, port, output, mode, &fb);
+	enable_output(data, port, output, mode, &frame_fb);
 
 	/* We want to keep the display running for a little bit, since
 	 * there's always the potential the driver isn't able to keep
@@ -563,11 +567,12 @@ static void do_test_display_crc(data_t *data, struct chamelium_port *port,
 	free(expected_crc);
 	free(crc);
 
+	igt_remove_fb(data->drm_fd, &frame_fb);
 	igt_remove_fb(data->drm_fd, &fb);
 }
 
 static void test_display_crc_one_mode(data_t *data, struct chamelium_port *port,
-				      int count)
+				      uint32_t fourcc, int count)
 {
 	igt_output_t *output;
 	drmModeConnector *connector;
@@ -580,13 +585,13 @@ static void test_display_crc_one_mode(data_t *data, struct chamelium_port *port,
 	primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
 	igt_assert(primary);
 
-	do_test_display_crc(data, port, output, &connector->modes[0], count);
+	do_test_display_crc(data, port, output, &connector->modes[0], fourcc, count);
 
 	drmModeFreeConnector(connector);
 }
 
 static void test_display_crc_all_modes(data_t *data, struct chamelium_port *port,
-					int count)
+				       uint32_t fourcc, int count)
 {
 	igt_output_t *output;
 	igt_plane_t *primary;
@@ -603,7 +608,7 @@ static void test_display_crc_all_modes(data_t *data, struct chamelium_port *port
 	for (i = 0; i < connector->count_modes; i++) {
 		drmModeModeInfo *mode = &connector->modes[i];
 
-		do_test_display_crc(data, port, output, mode, count);
+		do_test_display_crc(data, port, output, mode, fourcc, count);
 	}
 
 	drmModeFreeConnector(connector);
@@ -864,13 +869,16 @@ igt_main
 							edid_id, alt_edid_id);
 
 		connector_subtest("dp-crc-single", DisplayPort)
-			test_display_crc_all_modes(&data, port, 1);
+			test_display_crc_all_modes(&data, port,
+						   DRM_FORMAT_XRGB8888, 1);
 
 		connector_subtest("dp-crc-fast", DisplayPort)
-			test_display_crc_one_mode(&data, port, 1);
+			test_display_crc_one_mode(&data, port,
+						  DRM_FORMAT_XRGB8888, 1);
 
 		connector_subtest("dp-crc-multiple", DisplayPort)
-			test_display_crc_all_modes(&data, port, 3);
+			test_display_crc_all_modes(&data, port,
+						   DRM_FORMAT_XRGB8888, 3);
 
 		connector_subtest("dp-frame-dump", DisplayPort)
 			test_display_frame_dump(&data, port);
@@ -928,13 +936,16 @@ igt_main
 							edid_id, alt_edid_id);
 
 		connector_subtest("hdmi-crc-single", HDMIA)
-			test_display_crc_all_modes(&data, port, 1);
+			test_display_crc_all_modes(&data, port,
+						   DRM_FORMAT_XRGB8888, 1);
 
 		connector_subtest("hdmi-crc-fast", HDMIA)
-			test_display_crc_one_mode(&data, port, 1);
+			test_display_crc_one_mode(&data, port,
+						  DRM_FORMAT_XRGB8888, 1);
 
 		connector_subtest("hdmi-crc-multiple", HDMIA)
-			test_display_crc_all_modes(&data, port, 3);
+			test_display_crc_all_modes(&data, port,
+						   DRM_FORMAT_XRGB8888, 3);
 
 		connector_subtest("hdmi-frame-dump", HDMIA)
 			test_display_frame_dump(&data, port);
-- 
2.17.1

_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev

  parent reply	other threads:[~2018-10-08 14:05 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-08 14:04 [igt-dev] [CI 01/16] fb: Add buffer map/unmap functions Arkadiusz Hiler
2018-10-08 14:04 ` [igt-dev] [CI 02/16] fb: Only set the GEM domain on intel platforms Arkadiusz Hiler
2018-10-08 14:04 ` [igt-dev] [CI 03/16] fb: Add RGB888 format Arkadiusz Hiler
2018-10-08 14:04 ` [igt-dev] [CI 04/16] fb: Use an igt_fb for the cairo shadow buffer Arkadiusz Hiler
2018-10-08 14:04 ` [igt-dev] [CI 05/16] fb: convert: Remove swizzle from the arguments Arkadiusz Hiler
2018-10-08 14:04 ` [igt-dev] [CI 06/16] fb: Create common function to convert frame formats Arkadiusz Hiler
2018-10-08 14:04 ` [igt-dev] [CI 07/16] fb: Add format conversion routine Arkadiusz Hiler
2018-10-08 14:04 ` [igt-dev] [CI 08/16] igt: Make pixman mandatory Arkadiusz Hiler
2018-10-08 14:04 ` [igt-dev] [CI 09/16] tests: kms_plane: Disable XBGR8888 Arkadiusz Hiler
2018-10-08 14:04 ` [igt-dev] [CI 10/16] fb: Add support for conversions through pixman Arkadiusz Hiler
2018-10-08 14:04 ` [igt-dev] [CI 11/16] fb: Add more formats Arkadiusz Hiler
2018-10-08 14:04 ` [igt-dev] [CI 12/16] chamelium: Split CRC test function in two Arkadiusz Hiler
2018-10-08 14:04 ` [igt-dev] [CI 13/16] chamelium: Change our pattern for a custom one if needed Arkadiusz Hiler
2018-10-08 14:04 ` Arkadiusz Hiler [this message]
2018-10-08 14:04 ` [igt-dev] [CI 15/16] chamelium: Add format subtests Arkadiusz Hiler
2018-10-08 14:04 ` [igt-dev] [CI 16/16] tests: Add chamelium formats subtests to vc4 test lists Arkadiusz Hiler
2018-10-08 14:56 ` [igt-dev] ✓ Fi.CI.BAT: success for series starting with [CI,01/16] fb: Add buffer map/unmap functions Patchwork
2018-10-08 16:26 ` [igt-dev] ✓ Fi.CI.IGT: " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181008140433.32399-14-arkadiusz.hiler@intel.com \
    --to=arkadiusz.hiler@intel.com \
    --cc=igt-dev@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox