public inbox for igt-dev@lists.freedesktop.org
 help / color / mirror / Atom feed
From: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
To: igt-dev@lists.freedesktop.org
Cc: Petri Latvala <petri.latvala@intel.com>,
	Eben Upton <eben@raspberrypi.org>,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Subject: [igt-dev] [PATCH i-g-t v5 19/22] lib/igt_frame: Add a checkerboard frame comparison method
Date: Wed, 20 Feb 2019 16:39:10 +0100	[thread overview]
Message-ID: <20190220153913.10753-20-paul.kocialkowski@bootlin.com> (raw)
In-Reply-To: <20190220153913.10753-1-paul.kocialkowski@bootlin.com>

This introduces a new frame comparison method that was designed for
patterns that follow a checkerboard style. These patterns are made of
consecutive rectangular shapes with alternating solid colors. They are
currently used for some Chamelium-based tests.

The method is particularly adapted for cases where the edges of the
shapes might be blurred (e.g. due to scaling), which makes it impossible
to use pixel-perfect or CRC-based comparisons to decide whether the
captured frame matches the reference.

Overall, this test will first detect the edges of the pattern and later
exclude them from comparison. Colors are compared between the reference
and capture with a low threshold for error. A percentage of the faulty
pixels is calculated and the captured frame is considered invalid if
more than one percent of the pixels are erroneous.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
 lib/igt_frame.c | 135 ++++++++++++++++++++++++++++++++++++++++++++++++
 lib/igt_frame.h |   2 +
 2 files changed, 137 insertions(+)

diff --git a/lib/igt_frame.c b/lib/igt_frame.c
index 6984c02e9912..45523a79f601 100644
--- a/lib/igt_frame.c
+++ b/lib/igt_frame.c
@@ -267,3 +267,138 @@ complete:
 
 	return match;
 }
+
+#define XR24_COLOR_VALUE(data, stride, x, y, c) \
+	*((uint8_t *)(data) + (y) * (stride) + 4 * (x) + (c))
+
+/**
+ * igt_check_checkerboard_frame_match:
+ * @reference: The reference cairo surface
+ * @capture: The captured cairo surface
+ *
+ * Checks that the reference frame matches the captured frame using a
+ * method designed for checkerboard patterns. These patterns are made of
+ * consecutive rectangular shapes with alternating solid colors.
+ *
+ * The intent of this method is to cover cases where the captured result is
+ * not pixel-perfect due to features such as scaling or YUV conversion and
+ * subsampling. Such effects are mostly noticeable on the edges of the
+ * patterns, so they are detected and excluded from the comparison.
+ *
+ * The algorithm works with two major steps. First, the edges of the reference
+ * pattern are detected on the x and y axis independently. The detection is done
+ * by calculating an absolute difference with a span of a few pixels before and
+ * after the current position on the given axis, accumulated for each color
+ * component. If the sum is above a given threshold on one of the axis, the
+ * position is marked as an edge. In the second step, the pixel values are
+ * compared per-component, excluding positions that were marked as edges or
+ * that are at a transition between an edge and a non-edge. An error threshold
+ * (for each individual color component) is used to mark the position as
+ * erroneous or not. The ratio of erroneous pixels over compared pixels (that
+ * does not count excluded pixels) is then calculated and compared to the error
+ * rate threshold to determine whether the frames match or not.
+ *
+ * Returns: a boolean indicating whether the frames match
+ */
+bool igt_check_checkerboard_frame_match(cairo_surface_t *reference,
+					cairo_surface_t *capture)
+{
+	unsigned int width, height, ref_stride, cap_stride;
+	void *ref_data, *cap_data;
+	unsigned char *edges_map;
+	unsigned int x, y, c;
+	unsigned int errors = 0, pixels = 0;
+	unsigned int edge_threshold = 100;
+	unsigned int color_error_threshold = 24;
+	double error_rate_threshold = 0.01;
+	double error_rate;
+	unsigned int span = 2;
+	bool match = false;
+
+	width = cairo_image_surface_get_width(reference);
+	height = cairo_image_surface_get_height(reference);
+
+	ref_stride = cairo_image_surface_get_stride(reference);
+	ref_data = cairo_image_surface_get_data(reference);
+	igt_assert(ref_data);
+
+	cap_stride = cairo_image_surface_get_stride(capture);
+	cap_data = cairo_image_surface_get_data(capture);
+	igt_assert(cap_data);
+
+	edges_map = calloc(1, width * height);
+	igt_assert(edges_map);
+
+	/* First pass to detect the pattern edges. */
+	for (y = 0; y < height; y++) {
+		if (y < span || y > (height - span - 1))
+			continue;
+
+		for (x = 0; x < width; x++) {
+			unsigned int xdiff = 0, ydiff = 0;
+
+			if (x < span || x > (width - span - 1))
+				continue;
+
+			for (c = 0; c < 3; c++) {
+				xdiff += abs(XR24_COLOR_VALUE(ref_data, ref_stride, x + span, y, c) -
+					     XR24_COLOR_VALUE(ref_data, ref_stride, x - span, y, c));
+				ydiff += abs(XR24_COLOR_VALUE(ref_data, ref_stride, x, y + span, c) -
+					     XR24_COLOR_VALUE(ref_data, ref_stride, x, y - span, c));
+			}
+
+			edges_map[y * width + x] = (xdiff > edge_threshold ||
+						    ydiff > edge_threshold);
+		}
+	}
+
+	/* Second pass to detect errors. */
+	for (y = 0; y < height; y++) {
+		for (x = 0; x < width; x++) {
+			bool error = false;
+
+			if (edges_map[y * width + x])
+				continue;
+
+			for (c = 0; c < 3; c++) {
+				unsigned int diff;
+
+				/* Compare the reference and capture values. */
+				diff = abs(XR24_COLOR_VALUE(ref_data, ref_stride, x, y, c) -
+					   XR24_COLOR_VALUE(cap_data, cap_stride, x, y, c));
+
+				if (diff > color_error_threshold)
+					error = true;
+			}
+
+			/* Allow error if coming on or off an edge (on x). */
+			if (error && x >= span && x <= (width - span - 1) &&
+			    edges_map[y * width + (x - span)] !=
+			    edges_map[y * width + (x + span)])
+				continue;
+
+			/* Allow error if coming on or off an edge (on y). */
+			if (error && y >= span && y <= (height - span - 1) &&
+			    edges_map[(y - span) * width + x] !=
+			    edges_map[(y + span) * width + x] && error)
+				continue;
+
+			if (error)
+				errors++;
+
+			pixels++;
+		}
+	}
+
+	free(edges_map);
+
+	error_rate = (double) errors / pixels;
+
+	if (error_rate < error_rate_threshold)
+		match = true;
+
+	igt_debug("Checkerboard pattern %s with error rate %f %%\n",
+		  match ? "matched" : "not matched", error_rate * 100);
+
+	return match;
+}
diff --git a/lib/igt_frame.h b/lib/igt_frame.h
index 11f96cbea203..f44f57d7ce73 100644
--- a/lib/igt_frame.h
+++ b/lib/igt_frame.h
@@ -38,5 +38,7 @@ void igt_write_compared_frames_to_png(cairo_surface_t *reference,
 				      const char *capture_suffix);
 bool igt_check_analog_frame_match(cairo_surface_t *reference,
 				  cairo_surface_t *capture);
+bool igt_check_checkerboard_frame_match(cairo_surface_t *reference,
+					cairo_surface_t *capture);
 
 #endif
-- 
2.20.1

_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev

  parent reply	other threads:[~2019-02-20 15:40 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-20 15:38 [igt-dev] [PATCH i-g-t v5 00/22] Chamelium VC4 plane fuzzy testing, with SAND and T-tiled mode Paul Kocialkowski
2019-02-20 15:38 ` [igt-dev] [PATCH i-g-t v5 01/22] lib: drmtest: Add helpers to check and require the VC4 driver Paul Kocialkowski
2019-02-20 15:38 ` [igt-dev] [PATCH i-g-t v5 02/22] lib/igt_fb: Add checks on i915 for i915-specific tiled buffer allocation Paul Kocialkowski
2019-02-20 15:38 ` [igt-dev] [PATCH i-g-t v5 03/22] lib/igt_fb: Refactor create_bo_for_fb to prepare for VC4 support Paul Kocialkowski
2019-02-20 19:28   ` Lyude Paul
2019-02-20 15:38 ` [igt-dev] [PATCH i-g-t v5 04/22] lib/igt_fb: Add support for allocating T-tiled VC4 buffers Paul Kocialkowski
2019-02-20 15:38 ` [igt-dev] [PATCH i-g-t v5 05/22] lib/igt_fb: Add support for VC4 SAND tiling modes Paul Kocialkowski
2019-02-20 15:38 ` [igt-dev] [PATCH i-g-t v5 06/22] lib/igt_fb: Allow interpreting the tile height as a stride equivalent Paul Kocialkowski
2019-02-20 15:38 ` [igt-dev] [PATCH i-g-t v5 07/22] lib/igt_fb: Add a stride-provisioned fashion of igt_fb_convert Paul Kocialkowski
2019-02-20 15:38 ` [igt-dev] [PATCH i-g-t v5 08/22] lib/igt_fb: Add a helper to retreive the plane bpp for a given format Paul Kocialkowski
2019-02-20 15:39 ` [igt-dev] [PATCH i-g-t v5 09/22] lib/igt_fb: Add a helper to fill-in the available DRM formats Paul Kocialkowski
2019-02-20 15:39 ` [igt-dev] [PATCH i-g-t v5 10/22] lib/igt_vc4: Add helpers for converting linear to T-tiled RGB buffers Paul Kocialkowski
2019-02-20 15:39 ` [igt-dev] [PATCH i-g-t v5 11/22] lib/igt_vc4: Add helpers for converting linear to SAND-tiled buffers Paul Kocialkowski
2019-02-20 15:39 ` [igt-dev] [PATCH i-g-t v5 12/22] lib/igt_fb: Pass the modifier to igt_fb_convert helpers Paul Kocialkowski
2019-02-20 15:39 ` [igt-dev] [PATCH i-g-t v5 13/22] lib/igt_fb: Support converting to VC4 modifiers in igt_fb_convert Paul Kocialkowski
2019-02-20 15:39 ` [igt-dev] [PATCH i-g-t v5 14/22] lib/igt_kms: Add helpers to count and iterate planes from pipe Paul Kocialkowski
2019-02-20 15:39 ` [igt-dev] [PATCH i-g-t v5 15/22] lib/igt_kms: Add helpers to count and iterate planes from output Paul Kocialkowski
2019-02-20 15:39 ` [igt-dev] [PATCH i-g-t v5 16/22] lib/igt_chamelium: Fixup resources liberation in comparison helpers Paul Kocialkowski
2019-02-20 15:39 ` [igt-dev] [PATCH i-g-t v5 17/22] lib/igt_chamelium: Split frames dump logic and rework surroundings Paul Kocialkowski
2019-02-20 15:39 ` [igt-dev] [PATCH i-g-t v5 18/22] lib/igt_chamelium: Generalize the frame match helper with check type Paul Kocialkowski
2019-02-20 15:39 ` Paul Kocialkowski [this message]
2019-02-20 15:39 ` [igt-dev] [PATCH i-g-t v5 20/22] lib/igt_chamelium: Hook-in checkerboard comparison method in helpers Paul Kocialkowski
2019-02-20 15:39 ` [igt-dev] [PATCH i-g-t v5 21/22] chamelium: Move the YUV tests over to the checkerboard checking method Paul Kocialkowski
2019-02-20 15:39 ` [igt-dev] [PATCH i-g-t v5 22/22] chamelium: Add a display test for randomized planes Paul Kocialkowski
2019-02-20 16:31 ` [igt-dev] ✓ Fi.CI.BAT: success for Chamelium VC4 plane fuzzy testing, with SAND and T-tiled mode (rev3) Patchwork
2019-02-20 19:11 ` [igt-dev] ✗ Fi.CI.IGT: failure " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190220153913.10753-20-paul.kocialkowski@bootlin.com \
    --to=paul.kocialkowski@bootlin.com \
    --cc=eben@raspberrypi.org \
    --cc=igt-dev@lists.freedesktop.org \
    --cc=petri.latvala@intel.com \
    --cc=thomas.petazzoni@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox