From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To: igt-dev@lists.freedesktop.org
Subject: [igt-dev] [PATCH i-g-t 1/3] tests/kms_pipe_crc_basic: Use for_each_pipe_static().
Date: Mon, 25 Feb 2019 12:12:51 +0100 [thread overview]
Message-ID: <20190225111253.29086-1-maarten.lankhorst@linux.intel.com> (raw)
Instead of duplicating for_each_pipe_static functionality, use the actual macro,
and the same for kmstest_pipe_name.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
---
tests/kms_pipe_crc_basic.c | 36 +++++++++++++++++++-----------------
1 file changed, 19 insertions(+), 17 deletions(-)
diff --git a/tests/kms_pipe_crc_basic.c b/tests/kms_pipe_crc_basic.c
index 60802848d3ee..5ff7123814d3 100644
--- a/tests/kms_pipe_crc_basic.c
+++ b/tests/kms_pipe_crc_basic.c
@@ -152,7 +152,7 @@ test_read_crc_for_output(data_t *data, int pipe, igt_output_t *output,
}
}
-static void test_read_crc(data_t *data, int pipe, unsigned flags)
+static void test_read_crc(data_t *data, enum pipe pipe, unsigned flags)
{
igt_display_t *display = &data->display;
int valid_connectors = 0;
@@ -178,6 +178,8 @@ data_t data = {0, };
igt_main
{
+ enum pipe pipe;
+
igt_fixture {
data.drm_fd = drm_open_driver_master(DRIVER_ANY);
@@ -194,38 +196,38 @@ igt_main
igt_skip_on_simulation();
- for (int i = 0; i < 3; i++) {
- igt_subtest_f("read-crc-pipe-%c", 'A'+i)
- test_read_crc(&data, i, 0);
+ for_each_pipe_static(pipe) {
+ igt_subtest_f("read-crc-pipe-%s", kmstest_pipe_name(pipe))
+ test_read_crc(&data, pipe, 0);
- igt_subtest_f("read-crc-pipe-%c-frame-sequence", 'A'+i)
- test_read_crc(&data, i, TEST_SEQUENCE);
+ igt_subtest_f("read-crc-pipe-%s-frame-sequence", kmstest_pipe_name(pipe))
+ test_read_crc(&data, pipe, TEST_SEQUENCE);
- igt_subtest_f("nonblocking-crc-pipe-%c", 'A'+i)
- test_read_crc(&data, i, TEST_NONBLOCK);
+ igt_subtest_f("nonblocking-crc-pipe-%s", kmstest_pipe_name(pipe))
+ test_read_crc(&data, pipe, TEST_NONBLOCK);
- igt_subtest_f("nonblocking-crc-pipe-%c-frame-sequence", 'A'+i)
- test_read_crc(&data, i, TEST_SEQUENCE | TEST_NONBLOCK);
+ igt_subtest_f("nonblocking-crc-pipe-%s-frame-sequence", kmstest_pipe_name(pipe))
+ test_read_crc(&data, pipe, TEST_SEQUENCE | TEST_NONBLOCK);
- igt_subtest_f("suspend-read-crc-pipe-%c", 'A'+i) {
- igt_skip_on(i >= data.display.n_pipes);
+ igt_subtest_f("suspend-read-crc-pipe-%s", kmstest_pipe_name(pipe)) {
+ igt_skip_on(pipe >= data.display.n_pipes);
- test_read_crc(&data, i, 0);
+ test_read_crc(&data, pipe, 0);
igt_system_suspend_autoresume(SUSPEND_STATE_MEM,
SUSPEND_TEST_NONE);
- test_read_crc(&data, i, 0);
+ test_read_crc(&data, pipe, 0);
}
- igt_subtest_f("hang-read-crc-pipe-%c", 'A'+i) {
+ igt_subtest_f("hang-read-crc-pipe-%s", kmstest_pipe_name(pipe)) {
igt_hang_t hang = igt_allow_hang(data.drm_fd, 0, 0);
- test_read_crc(&data, i, 0);
+ test_read_crc(&data, pipe, 0);
igt_force_gpu_reset(data.drm_fd);
- test_read_crc(&data, i, 0);
+ test_read_crc(&data, pipe, 0);
igt_disallow_hang(data.drm_fd, hang);
}
--
2.20.1
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev
next reply other threads:[~2019-02-25 11:12 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-25 11:12 Maarten Lankhorst [this message]
2019-02-25 11:12 ` [igt-dev] [PATCH i-g-t 2/3] tests/kms_pipe_crc_basic: Only test a single output per pipe Maarten Lankhorst
2019-02-25 11:12 ` [igt-dev] [PATCH i-g-t 3/3] tests/kms_pipe_crc_basic: Add flip tests to ensure basic CRC sanity checking Maarten Lankhorst
2019-02-25 11:48 ` [igt-dev] ✓ Fi.CI.BAT: success for series starting with [i-g-t,1/3] tests/kms_pipe_crc_basic: Use for_each_pipe_static() Patchwork
2019-02-25 14:27 ` [igt-dev] ✓ Fi.CI.IGT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190225111253.29086-1-maarten.lankhorst@linux.intel.com \
--to=maarten.lankhorst@linux.intel.com \
--cc=igt-dev@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox