From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Kevin Strasser <kevin.strasser@intel.com>
Cc: igt-dev@lists.freedesktop.org
Subject: Re: [igt-dev] [RFC v2 3/5] tests/kms_available_modes_crc: Add cases for 64bit formats
Date: Fri, 5 Apr 2019 22:29:37 +0300 [thread overview]
Message-ID: <20190405192937.GT3888@intel.com> (raw)
In-Reply-To: <1551838717-5283-4-git-send-email-kevin.strasser@intel.com>
On Tue, Mar 05, 2019 at 06:18:35PM -0800, Kevin Strasser wrote:
> This test iterates through all supported formats, add cases for new 64 bit
> formats so it continues passing.
>
> rfc2:
> -Use uint64_t (Maarten)
>
> Signed-off-by: Kevin Strasser <kevin.strasser@intel.com>
Looks sensible enough to me.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> ---
> tests/kms_available_modes_crc.c | 19 ++++++++++++++++++-
> 1 file changed, 18 insertions(+), 1 deletion(-)
>
> diff --git a/tests/kms_available_modes_crc.c b/tests/kms_available_modes_crc.c
> index 7ff385f..33c8ab1 100644
> --- a/tests/kms_available_modes_crc.c
> +++ b/tests/kms_available_modes_crc.c
> @@ -124,10 +124,11 @@ static const struct {
> enum { BYTES_PP_1=1,
> BYTES_PP_2=2,
> BYTES_PP_4=4,
> + BYTES_PP_8=8,
> NV12,
> P010,
> SKIP4 } bpp;
> - uint32_t value;
> + uint64_t value;
> } fillers[] = {
> { DRM_FORMAT_C8, 0, BYTES_PP_1, 0xff},
> { DRM_FORMAT_RGB565, 0, BYTES_PP_2, 0xffff},
> @@ -146,6 +147,11 @@ static const struct {
> { DRM_FORMAT_XRGB2101010, 0, BYTES_PP_4, 0xffffffff},
> { DRM_FORMAT_XBGR2101010, 0, BYTES_PP_4, 0xffffffff},
>
> + { DRM_FORMAT_XRGB16161616F, 0, BYTES_PP_8, 0x3c003c003c003c00},
> + { DRM_FORMAT_XBGR16161616F, 0, BYTES_PP_8, 0x3c003c003c003c00},
> + { DRM_FORMAT_ARGB16161616F, 0, BYTES_PP_8, 0x3c003c003c003c00},
> + { DRM_FORMAT_ABGR16161616F, 0, BYTES_PP_8, 0x3c003c003c003c00},
> +
> { DRM_FORMAT_YUYV, 0, BYTES_PP_4, 0x80eb80eb},
> { DRM_FORMAT_YVYU, 0, BYTES_PP_4, 0x80eb80eb},
> { DRM_FORMAT_VYUY, 0, BYTES_PP_4, 0xeb80eb80},
> @@ -177,6 +183,7 @@ static bool fill_in_fb(data_t *data, igt_output_t *output, igt_plane_t *plane,
> signed i, c, writesize;
> unsigned short* ptemp_16_buf;
> unsigned int* ptemp_32_buf;
> + unsigned long int* ptemp_64_buf;
>
> for( i = 0; fillers[i].fourcc != 0; i++ ) {
> if( fillers[i].fourcc == format )
> @@ -184,6 +191,12 @@ static bool fill_in_fb(data_t *data, igt_output_t *output, igt_plane_t *plane,
> }
>
> switch (fillers[i].bpp) {
> + case BYTES_PP_8:
> + ptemp_64_buf = (uint64_t*)data->buf;
> + for (c = 0; c < data->size/8; c++)
> + ptemp_64_buf[c] = fillers[i].value;
> + writesize = data->size;
> + break;
> case BYTES_PP_4:
> ptemp_32_buf = (unsigned int*)data->buf;
> for (c = 0; c < data->size/4; c++)
> @@ -291,6 +304,10 @@ static bool setup_fb(data_t *data, igt_output_t *output, igt_plane_t *plane,
> case BYTES_PP_4:
> bpp = 32;
> break;
> +
> + case BYTES_PP_8:
> + bpp = 64;
> + break;
> }
>
> igt_get_fb_tile_size(data->gfx_fd, tiling, bpp,
> --
> 2.7.4
--
Ville Syrjälä
Intel
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev
next prev parent reply other threads:[~2019-04-05 19:29 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-06 2:18 [igt-dev] [RFC v2 0/5] Add support for fp16 formats Kevin Strasser
2019-03-06 2:18 ` [igt-dev] [RFC v2 1/5] lib: Add halffloat implementation Kevin Strasser
2019-04-05 19:23 ` Ville Syrjälä
2019-04-05 19:29 ` Strasser, Kevin
2019-03-06 2:18 ` [igt-dev] [RFC v2 2/5] include: Add fp16 format defines Kevin Strasser
2019-03-06 2:18 ` [igt-dev] [RFC v2 3/5] tests/kms_available_modes_crc: Add cases for 64bit formats Kevin Strasser
2019-04-05 19:29 ` Ville Syrjälä [this message]
2019-04-05 19:43 ` Strasser, Kevin
2019-04-05 19:58 ` Ville Syrjälä
2019-03-06 2:18 ` [igt-dev] [RFC v2 4/5] lib/igt_fb: Add support for fp16 formats through conversion Kevin Strasser
2019-04-05 19:26 ` Ville Syrjälä
2019-03-06 2:18 ` [igt-dev] [RFC v2 5/5] tests/kms_plane_scaling: Skip testing unsupported fp16 features Kevin Strasser
2019-04-05 19:38 ` Ville Syrjälä
2019-03-06 3:19 ` [igt-dev] ✓ Fi.CI.BAT: success for Add support for fp16 formats (rev2) Patchwork
2019-03-06 9:31 ` [igt-dev] ✗ Fi.CI.IGT: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190405192937.GT3888@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=igt-dev@lists.freedesktop.org \
--cc=kevin.strasser@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox