From: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
To: igt-dev@lists.freedesktop.org
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Subject: [igt-dev] [PATCH i-g-t 1/2] tools/vbt_decode: Update PSR1 training pattern decode
Date: Fri, 19 Jul 2019 18:37:34 -0700 [thread overview]
Message-ID: <20190720013735.11953-1-dhinakaran.pandiyan@intel.com> (raw)
The bit field corresponding to PSR1 training patterns used to be
platform agnostic. But, for VBT versions above 205 on gen9+, the values
map to hardware supported duration. The only exception being BXT, which
follows the legacy mapping.
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
---
tools/intel_vbt_decode.c | 37 ++++++++++++++++++++++++++++++-------
1 file changed, 30 insertions(+), 7 deletions(-)
diff --git a/tools/intel_vbt_decode.c b/tools/intel_vbt_decode.c
index 3b9006f5..ea64eee2 100644
--- a/tools/intel_vbt_decode.c
+++ b/tools/intel_vbt_decode.c
@@ -945,14 +945,20 @@ static void dump_psr(struct context *context,
const struct bdb_psr *psr_block = block->data;
int i;
uint32_t psr2_tp_time;
+ const char *bxt_str = "$VBT_BROXTON";
+ bool is_bxt;
/* The same block ID was used for something else before? */
if (context->bdb->version < 165)
return;
+ is_bxt = !strncmp((char *)context->vbt->signature, bxt_str,
+ strlen(bxt_str));
psr2_tp_time = psr_block->psr2_tp2_tp3_wakeup_time;
+
for (i = 0; i < 16; i++) {
const struct psr_table *psr = &psr_block->psr_table[i];
+ static const uint16_t psr1_tp_times[] = {500, 100, 2500, 0};
if (i != context->panel_type && !context->dump_all_panel_types)
continue;
@@ -979,16 +985,33 @@ static void dump_psr(struct context *context,
break;
}
- printf("\t\tIdle frames to for PSR enable: %d\n",
+ printf("\t\tIdle frames to wait for PSR enable: %d\n",
psr->idle_frames);
- printf("\t\tTP1 wakeup time: %d usec (0x%x)\n",
- psr->tp1_wakeup_time * 100,
- psr->tp1_wakeup_time);
- printf("\t\tTP2/TP3 wakeup time: %d usec (0x%x)\n",
- psr->tp2_tp3_wakeup_time * 100,
- psr->tp2_tp3_wakeup_time);
+ if (is_bxt || context->bdb->version < 205)
+ printf("\t\tTP1 wakeup time: %d usec (0x%x)\n",
+ psr->tp1_wakeup_time * 100,
+ psr->tp1_wakeup_time);
+ else if (psr->tp1_wakeup_time <= 2)
+ printf("\t\tTP1 wakeup time: %d usec (0x%x)\n",
+ psr1_tp_times[psr->tp1_wakeup_time],
+ psr->tp1_wakeup_time);
+ else
+ printf("\t\tTP1 wakeup time invalid (0x%x)",
+ psr->tp1_wakeup_time);
+
+ if (is_bxt || context->bdb->version < 205)
+ printf("\t\tTP2/TP3 wakeup time: %d usec (0x%x)\n",
+ psr->tp2_tp3_wakeup_time * 100,
+ psr->tp2_tp3_wakeup_time);
+ else if (psr->tp2_tp3_wakeup_time <= 2)
+ printf("\t\tTP2/TP3 wakeup time: %d usec (0x%x)\n",
+ psr1_tp_times[psr->tp2_tp3_wakeup_time],
+ psr->tp2_tp3_wakeup_time);
+ else
+ printf("\t\tTP2/3 wakeup time invalid (0x%x)",
+ psr->tp2_tp3_wakeup_time);
if (context->bdb->version >= 226) {
int index;
--
2.17.1
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev
next reply other threads:[~2019-07-20 1:37 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-20 1:37 Dhinakaran Pandiyan [this message]
2019-07-20 1:37 ` [igt-dev] [PATCH i-g-t 2/2] tools/vbt_decode: Fix PSR2 decoded training pattern duration Dhinakaran Pandiyan
2019-07-20 3:14 ` [igt-dev] ✗ Fi.CI.BAT: failure for series starting with [i-g-t,1/2] tools/vbt_decode: Update PSR1 training pattern decode Patchwork
2019-07-29 23:50 ` [igt-dev] ✓ Fi.CI.BAT: success for series starting with [i-g-t,1/2] tools/vbt_decode: Update PSR1 training pattern decode (rev2) Patchwork
2019-07-30 9:41 ` [igt-dev] ✓ Fi.CI.IGT: " Patchwork
2019-07-31 13:10 ` [igt-dev] [PATCH i-g-t 1/2] tools/vbt_decode: Update PSR1 training pattern decode Jani Nikula
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190720013735.11953-1-dhinakaran.pandiyan@intel.com \
--to=dhinakaran.pandiyan@intel.com \
--cc=igt-dev@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox