public inbox for igt-dev@lists.freedesktop.org
 help / color / mirror / Atom feed
From: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
To: igt-dev@lists.freedesktop.org,
	Chris Wilson <chris.p.wilson@intel.com>,
	Lionel G Landwerlin <lionel.g.landwerlin@intel.com>
Subject: [igt-dev] [PATCH i-g-t] test/perf: Add test to verify OA TLB invalidation
Date: Tue, 10 Mar 2020 03:07:41 +0000	[thread overview]
Message-ID: <20200310030741.13164-1-umesh.nerlige.ramappa@intel.com> (raw)

Run 2 polling tests back to back and compare the number of OA reports
captured. Make sure the number of reports are almost same.

Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
---
 tests/perf.c | 97 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 97 insertions(+)

diff --git a/tests/perf.c b/tests/perf.c
index 5e818030..2394adc4 100644
--- a/tests/perf.c
+++ b/tests/perf.c
@@ -2265,6 +2265,97 @@ test_polling(void)
 	__perf_close(stream_fd);
 }
 
+static int
+num_valid_reports_captured(struct drm_i915_perf_open_param *param)
+{
+	uint8_t buf[1024 * 1024];
+	int64_t tick_ns = 1000000000 / sysconf(_SC_CLK_TCK);
+	int64_t test_duration_ns = tick_ns * 5 * 100; /* 5 seconds */
+	int64_t start, end;
+	int num_reports = 0;
+
+	stream_fd = __perf_open(drm_fd, param, true);
+
+	igt_debug("tick length = %dns, test duration = %"PRIu64"ns\n",
+		  (int)tick_ns, test_duration_ns);
+
+	start = get_time();
+	do_ioctl(stream_fd, I915_PERF_IOCTL_ENABLE, 0);
+	for (/* nop */; ((end = get_time()) - start) < test_duration_ns; /* nop */) {
+		struct pollfd pollfd = { .fd = stream_fd, .events = POLLIN };
+		struct drm_i915_perf_record_header *header;
+		int ret;
+
+		while ((ret = poll(&pollfd, 1, -1)) < 0 &&
+		       errno == EINTR)
+			;
+		igt_assert_eq(ret, 1);
+		igt_assert(pollfd.revents & POLLIN);
+
+		while ((ret = read(stream_fd, buf, sizeof(buf))) < 0 &&
+		       errno == EINTR)
+			;
+
+		/* poll checks if the tail has advanced on the OA buffer, but
+		 * does not check if the reports are valid. On read, the driver
+		 * checks if the reports are valid or not. if none of the
+		 * reports are valid, it returns EAGAIN. EAGAIN should also
+		 * suffice to show that the TLB invalidation failed, but we will
+		 * try for a more concrete check. Ignore read errors here.
+		 */
+		if (ret < 0)
+			continue;
+
+		for (int offset = 0; offset < ret; offset += header->size) {
+			header = (void *)(buf + offset);
+
+			if (header->type == DRM_I915_PERF_RECORD_SAMPLE) {
+				uint32_t *report = (void *)(header + 1);
+
+				if ((report[0] >> OAREPORT_REASON_SHIFT) &
+				    OAREPORT_REASON_TIMER)
+					num_reports++;
+			}
+		}
+	}
+	__perf_close(stream_fd);
+
+	return num_reports;
+}
+
+static void
+gen12_test_oa_tlb_invalidate(void)
+{
+	int oa_exponent = max_oa_exponent_for_period_lte(30000000);
+	uint64_t properties[] = {
+		DRM_I915_PERF_PROP_SAMPLE_OA, true,
+
+		DRM_I915_PERF_PROP_OA_METRICS_SET, test_set->perf_oa_metrics_set,
+		DRM_I915_PERF_PROP_OA_FORMAT, test_set->perf_oa_format,
+		DRM_I915_PERF_PROP_OA_EXPONENT, oa_exponent,
+	};
+	struct drm_i915_perf_open_param param = {
+		.flags = I915_PERF_FLAG_FD_CLOEXEC |
+			I915_PERF_FLAG_DISABLED |
+			I915_PERF_FLAG_FD_NONBLOCK,
+		.num_properties = sizeof(properties) / 16,
+		.properties_ptr = to_user_pointer(properties),
+	};
+	int num_reports1, num_reports2;
+	
+	/* Capture reports for 5 seconds twice and then make sure you get around
+	 * the same number of reports. In the case of failure, the number of
+	 * reports will vary largely since the beginning of the OA buffer
+	 * will have invalid entries.
+	 */
+	num_reports1 = num_valid_reports_captured(&param);
+	num_reports2 = num_valid_reports_captured(&param);
+
+	igt_debug("num_reports1 = %d, num_reports2 = %d\n", num_reports1, num_reports2);
+	igt_assert(num_reports2 > 0.95 * num_reports1);
+}
+
+
 static void
 test_buffer_fill(void)
 {
@@ -4622,6 +4713,12 @@ igt_main
 		gen8_test_single_ctx_render_target_writes_a_counter();
 	}
 
+	igt_describe("Test OA TLB invalidate");
+	igt_subtest("gen12-oa-tlb-invalidate") {
+		igt_require(intel_gen(devid) >= 12);
+		gen12_test_oa_tlb_invalidate();
+	}
+
 	igt_describe("Measure performance for a specific context using OAR in Gen 12");
 	igt_subtest("gen12-unprivileged-single-ctx-counters") {
 		igt_require(intel_gen(devid) >= 12);
-- 
2.17.1

_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev

             reply	other threads:[~2020-03-10  3:07 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-10  3:07 Umesh Nerlige Ramappa [this message]
2020-03-10  9:02 ` [igt-dev] [PATCH i-g-t] test/perf: Add test to verify OA TLB invalidation Lionel Landwerlin
2020-03-10 17:57   ` Umesh Nerlige Ramappa
2020-03-12 13:18     ` Lionel Landwerlin
2020-03-10 13:14 ` [igt-dev] ✓ Fi.CI.BAT: success for " Patchwork
2020-03-10 17:22 ` [igt-dev] ✓ Fi.CI.IGT: " Patchwork
  -- strict thread matches above, loose matches on Subject: below --
2020-03-10 19:00 [igt-dev] [PATCH i-g-t] " Umesh Nerlige Ramappa
2020-03-12 13:28 ` Lionel Landwerlin
2020-03-13 17:42 Umesh Nerlige Ramappa
2020-03-13 17:51 ` Chris Wilson
2020-03-16  9:52 ` Lionel Landwerlin
2020-03-14  0:00 Umesh Nerlige Ramappa
2020-03-14 10:36 ` Lionel Landwerlin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200310030741.13164-1-umesh.nerlige.ramappa@intel.com \
    --to=umesh.nerlige.ramappa@intel.com \
    --cc=chris.p.wilson@intel.com \
    --cc=igt-dev@lists.freedesktop.org \
    --cc=lionel.g.landwerlin@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox