Igt-dev Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Mohammed Khajapasha <mohammed.khajapasha@intel.com>
To: arkadiusz.hiler@intel.com, igt-dev@lists.freedesktop.org,
	petri.latvala@intel.com, kishore.kunche@intel.com
Subject: [igt-dev] [PATCH i-g-t 00/11] lib/igt_kms: Add support for display with
Date: Fri, 17 Jul 2020 15:40:50 +0000	[thread overview]
Message-ID: <20200717154101.8849-1-mohammed.khajapasha@intel.com> (raw)

With non-contiguous pipes display, pipe mapping is always not same as
crtc mapping, For i915 pipe is enum id of i915's crtc object and
it is not equal to crtc offset of a pipe in mode config list.
Hence allocating upper bound array for igt_pipe and reading
pipe id using GET_PIPE_FROM_CRTC_ID ioctl.
Using crtc offset for a pipe to do ordering pipe with crtc list.

Example:
	With a non-contiguous pipe display, with PIPE_A & PIPE_D
	are enabled, PIPE_C & PIPE_B disabled configuration,
	the pipe for PIPE_A & D will be '0' and '3' and crtc offsets
	are '0' & '1' in mode config list using crtc offset to ordering
	enabled pipes with crtc list in mode config.

v8:
	Modified documentation as per review comments by <Hiler, Arkadiusz>

Mohammed Khajapasha (11):
  lib/igt_kms: Add support for display with non-contiguous pipes
  lib/igt_kms: Add igt_require_pipe() function
  tests/kms_cursor_legacy: Read crtc id for enable pipes
  tests/kms_lease: Get pipe from crtc for enable pipes
  tests/kms_lease: Read crtc id for a valid pipe
  lib/kms: Skip igt test cases for disabled display pipes
  tests/kms: Skip kms test cases for disabled pipes
  tests/kms_atomic_transition: Set modeset for enable pipes only
  i915/gem_eio: Set modeset for enable pipes
  lib/kms: Convert pipe id flags for a vblank using crtc offset
  tests/kms: Use crtc offset to read vblank event for a pipe

 lib/igt_kms.c                   | 138 +++++++++++++++++++++++++-------
 lib/igt_kms.h                   |  42 ++++++++--
 tests/i915/gem_eio.c            |   2 +
 tests/i915/perf_pmu.c           |   3 +-
 tests/kms_atomic_transition.c   |  15 +++-
 tests/kms_available_modes_crc.c |   4 +-
 tests/kms_color.c               |  37 ++++++---
 tests/kms_color_chamelium.c     |   2 +-
 tests/kms_concurrent.c          |   2 +-
 tests/kms_cursor_crc.c          |  18 +++--
 tests/kms_cursor_edge_walk.c    |   4 +-
 tests/kms_cursor_legacy.c       |  13 +--
 tests/kms_lease.c               |  28 +++++--
 tests/kms_pipe_crc_basic.c      |   9 ++-
 tests/kms_plane.c               |  10 ++-
 tests/kms_plane_lowres.c        |   2 +-
 tests/kms_plane_multiple.c      |   2 +-
 tests/kms_sequence.c            |   3 +-
 tests/kms_universal_plane.c     |  12 +--
 tests/kms_vblank.c              |   3 +-
 20 files changed, 257 insertions(+), 92 deletions(-)

-- 
2.25.1

_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev

             reply	other threads:[~2020-07-17 15:41 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-17 15:40 Mohammed Khajapasha [this message]
2020-07-17 15:40 ` [igt-dev] [PATCH i-g-t 01/11] lib/igt_kms: Add support for display with non-contiguous pipes Mohammed Khajapasha
2020-07-17 15:40 ` [igt-dev] [PATCH i-g-t 02/11] lib/igt_kms: Add igt_require_pipe() function Mohammed Khajapasha
2020-07-17 15:40 ` [igt-dev] [PATCH i-g-t 03/11] tests/kms_cursor_legacy: Read crtc id for enable pipes Mohammed Khajapasha
2020-07-17 15:40 ` [igt-dev] [PATCH i-g-t 04/11] tests/kms_lease: Get pipe from crtc " Mohammed Khajapasha
2020-07-20  8:39   ` Arkadiusz Hiler
2020-07-17 15:40 ` [igt-dev] [PATCH i-g-t 05/11] tests/kms_lease: Read crtc id for a valid pipe Mohammed Khajapasha
2020-07-17 15:40 ` [igt-dev] [PATCH i-g-t 06/11] lib/kms: Skip igt test cases for disabled display pipes Mohammed Khajapasha
2020-07-17 15:40 ` [igt-dev] [PATCH i-g-t 07/11] tests/kms: Skip kms test cases for disabled pipes Mohammed Khajapasha
2020-07-17 15:40 ` [igt-dev] [PATCH i-g-t 08/11] tests/kms_atomic_transition: Set modeset for enable pipes only Mohammed Khajapasha
2020-07-17 15:40 ` [igt-dev] [PATCH i-g-t 09/11] i915/gem_eio: Set modeset for enable pipes Mohammed Khajapasha
2020-07-17 15:41 ` [igt-dev] [PATCH i-g-t 10/11] lib/kms: Convert pipe id flags for a vblank using crtc offset Mohammed Khajapasha
2020-07-20  9:35   ` Arkadiusz Hiler
2020-07-17 15:41 ` [igt-dev] [PATCH i-g-t 11/11] tests/kms: Use crtc offset to read vblank event for a pipe Mohammed Khajapasha
2020-07-17 16:32 ` [igt-dev] ✓ Fi.CI.BAT: success for lib/igt_kms: Add support for display with (rev8) Patchwork
2020-07-17 17:33 ` [igt-dev] ✗ Fi.CI.IGT: failure " Patchwork
2020-07-18 18:15 ` [igt-dev] ✓ Fi.CI.IGT: success " Patchwork
2020-07-20  9:39 ` [igt-dev] [PATCH i-g-t 00/11] lib/igt_kms: Add support for display with Arkadiusz Hiler
  -- strict thread matches above, loose matches on Subject: below --
2020-07-20 15:20 Mohammed Khajapasha
2020-07-20 11:48 Mohammed Khajapasha
2020-07-11 20:05 Mohammed Khajapasha
2020-07-11 18:04 Mohammed Khajapasha
2020-07-06  4:40 Mohammed Khajapasha

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200717154101.8849-1-mohammed.khajapasha@intel.com \
    --to=mohammed.khajapasha@intel.com \
    --cc=arkadiusz.hiler@intel.com \
    --cc=igt-dev@lists.freedesktop.org \
    --cc=kishore.kunche@intel.com \
    --cc=petri.latvala@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox