From: Jeremy Cline <jcline@redhat.com>
To: IGT GPU Tools <igt-dev@lists.freedesktop.org>
Cc: Petri Latvala <petri.latvala@intel.com>
Subject: [igt-dev] [PATCH i-g-t v3 2/2] tests/kms_addfb_basic: add vendor-specific errno assertions
Date: Tue, 17 Nov 2020 15:02:07 -0500 [thread overview]
Message-ID: <20201117200207.92128-3-jcline@redhat.com> (raw)
In-Reply-To: <20201117200207.92128-1-jcline@redhat.com>
This adjusts the check on failed calls to DRM_IOCTL_MODE_ADDFB2 in
various scenarios. According to the kernel's
drm_mode_config_funcs.fb_create documentation, a negative return code is
all that is required to signal failure, and different drivers return
different errors in these scenarios.
Particularly, Nouveau returns -ERANGE rather than -EINVAL in scenarios
where the buffer is too small for the proposed configuration.
In situations where Nouveau and Intel return codes diverge, split out
the errno assertions into device-specific blocks.
Signed-off-by: Jeremy Cline <jcline@redhat.com>
---
Changes since v2:
- Remove vendor-specific subtests.
tests/kms_addfb_basic.c | 45 ++++++++++++++++++++++++++++++++---------
1 file changed, 35 insertions(+), 10 deletions(-)
diff --git a/tests/kms_addfb_basic.c b/tests/kms_addfb_basic.c
index 0ec583fe..0e5e3aeb 100644
--- a/tests/kms_addfb_basic.c
+++ b/tests/kms_addfb_basic.c
@@ -281,8 +281,19 @@ static void pitch_tests(int fd)
for (i = 0; i < ARRAY_SIZE(bad_pitches); i++) {
igt_subtest_f("bad-pitch-%i", bad_pitches[i]) {
f.pitches[0] = bad_pitches[i];
- igt_assert(drmIoctl(fd, DRM_IOCTL_MODE_ADDFB2, &f) == -1 &&
- errno == EINVAL);
+ igt_assert_eq(igt_ioctl(fd, DRM_IOCTL_MODE_ADDFB2, &f), -1);
+ igt_assert(errno != 0);
+ if (is_i915_device(fd)) {
+ igt_assert_eq(errno, EINVAL);
+ } else if (is_nouveau_device(fd)) {
+ if (bad_pitches[i] > 4 * 1024)
+ igt_assert_eq(errno, ERANGE);
+ else
+ igt_assert_eq(errno, EINVAL);
+ } else {
+ igt_info("Unknown vendor; errno unchecked (returned %i)", errno);
+ }
+ errno = 0;
}
}
@@ -367,6 +378,8 @@ static void size_tests(int fd)
struct drm_mode_fb_cmd2 f = {};
struct drm_mode_fb_cmd2 f_16 = {};
struct drm_mode_fb_cmd2 f_8 = {};
+ struct drm_mode_fb_cmd2 *framebuffers[] = {&f, &f_16, &f_8};
+ int i;
f.width = 1024;
f.height = 1024;
@@ -426,18 +439,30 @@ static void size_tests(int fd)
f_16.height++;
f_8.height++;
igt_subtest("too-high") {
- igt_assert(drmIoctl(fd, DRM_IOCTL_MODE_ADDFB2, &f) == -1 &&
- errno == EINVAL);
- igt_assert(drmIoctl(fd, DRM_IOCTL_MODE_ADDFB2, &f_16) == -1 &&
- errno == EINVAL);
- igt_assert(drmIoctl(fd, DRM_IOCTL_MODE_ADDFB2, &f_8) == -1 &&
- errno == EINVAL);
+ for (i = 0; i < ARRAY_SIZE(framebuffers); i++) {
+ igt_assert_eq(igt_ioctl(fd, DRM_IOCTL_MODE_ADDFB2, framebuffers[i]), -1);
+ igt_assert(errno != 0);
+ if (is_i915_device(fd))
+ igt_assert_eq(errno, EINVAL);
+ else if (is_nouveau_device(fd))
+ igt_assert_eq(errno, ERANGE);
+ else
+ igt_info("Unknown vendor; errno unchecked (returned %i)", errno);
+ errno = 0;
+ }
}
f.handles[0] = gem_bo_small;
igt_subtest("bo-too-small") {
- igt_assert(drmIoctl(fd, DRM_IOCTL_MODE_ADDFB2, &f) == -1 &&
- errno == EINVAL);
+ igt_assert_eq(igt_ioctl(fd, DRM_IOCTL_MODE_ADDFB2, &f), -1);
+ igt_assert(errno != 0);
+ if (is_i915_device(fd))
+ igt_assert_eq(errno, EINVAL);
+ else if (is_nouveau_device(fd))
+ igt_assert_eq(errno, ERANGE);
+ else
+ igt_info("Unknown vendor; errno unchecked (returned %i)", errno);
+ errno = 0;
}
/* Just to check that the parameters would work. */
--
2.28.0
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev
next prev parent reply other threads:[~2020-11-17 20:02 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-13 16:49 [igt-dev] [PATCH i-g-t 0/2] tests/kms_addfb_basic: Nouveau support Jeremy Cline
2020-11-13 16:49 ` [igt-dev] [PATCH i-g-t 1/2] tests/kms_addfb_basic: Mark Intel-only tests as such Jeremy Cline
2020-11-13 19:00 ` Lyude Paul
2020-11-13 16:49 ` [igt-dev] [PATCH i-g-t 2/2] tests/kms_addfb_basic: Relax errno assertions Jeremy Cline
2020-11-13 18:59 ` Lyude Paul
2020-11-13 21:41 ` Jeremy Cline
2020-11-16 11:14 ` Petri Latvala
2020-11-13 20:27 ` [igt-dev] ✓ Fi.CI.BAT: success for tests/kms_addfb_basic: Nouveau support Patchwork
2020-11-14 0:30 ` [igt-dev] ✗ Fi.CI.IGT: failure " Patchwork
2020-11-16 22:18 ` [igt-dev] [PATCH i-g-t v2 0/2] " Jeremy Cline
2020-11-16 22:18 ` [igt-dev] [PATCH i-g-t v2 1/2] tests/kms_addfb_basic: Mark Intel-only tests as such Jeremy Cline
2020-11-16 22:18 ` [igt-dev] [PATCH i-g-t v2 2/2] tests/kms_addfb_basic: add vendor-specific errno assertions Jeremy Cline
2020-11-17 7:31 ` Petri Latvala
2020-11-17 20:02 ` [igt-dev] [PATCH i-g-t v3 0/2] tests/kms_addfb_basic: Nouveau support Jeremy Cline
2020-11-17 20:02 ` [igt-dev] [PATCH i-g-t v3 1/2] tests/kms_addfb_basic: Mark Intel-only tests as such Jeremy Cline
2020-11-17 20:02 ` Jeremy Cline [this message]
2020-11-18 9:12 ` [igt-dev] [PATCH i-g-t v3 2/2] tests/kms_addfb_basic: add vendor-specific errno assertions Petri Latvala
2020-11-18 15:23 ` [igt-dev] [PATCH i-g-t v4 0/2] tests/kms_addfb_basic: Nouveau support Jeremy Cline
2020-11-18 15:23 ` [igt-dev] [PATCH i-g-t v4 1/2] tests/kms_addfb_basic: Mark Intel-only tests as such Jeremy Cline
2020-11-18 15:23 ` [igt-dev] [PATCH i-g-t v4 2/2] tests/kms_addfb_basic: add vendor-specific errno assertions Jeremy Cline
2020-11-18 21:23 ` Lyude Paul
2020-11-18 17:00 ` [igt-dev] ✓ Fi.CI.BAT: success for series starting with [i-g-t,v4,1/2] tests/kms_addfb_basic: Mark Intel-only tests as such Patchwork
2020-11-19 1:39 ` [igt-dev] ✓ Fi.CI.IGT: " Patchwork
2020-11-17 21:02 ` [igt-dev] ✓ Fi.CI.BAT: success for series starting with [i-g-t,v3,1/2] " Patchwork
2020-11-18 1:14 ` [igt-dev] ✓ Fi.CI.IGT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201117200207.92128-3-jcline@redhat.com \
--to=jcline@redhat.com \
--cc=igt-dev@lists.freedesktop.org \
--cc=petri.latvala@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox