From: Ville Syrjala <ville.syrjala@linux.intel.com>
To: igt-dev@lists.freedesktop.org
Subject: [igt-dev] [PATCH i-g-t v2 1/2] tests/kms_plane: Don't test all format+modifier combinations
Date: Wed, 7 Apr 2021 18:27:26 +0300 [thread overview]
Message-ID: <20210407152726.1122-1-ville.syrjala@linux.intel.com> (raw)
In-Reply-To: <20210329190016.13394-1-ville.syrjala@linux.intel.com>
From: Ville Syrjälä <ville.syrjala@linux.intel.com>
When running the non-extended tests let's use igt_reduce_format()
and test each format "class" only once for each modifier except
linear. This follows the earlier pattern of doing all the YCbCr
limited vs. full range tests only for linear and skipping for
other modifiers.
This should maintian sufficient coverage to catch most watermark
related bugs and whatnot.
On icl:
$ time kms_plane --r pixel-format-pipe-A-planes
- real 0m9.390s
+ real 0m7.244s
Full run of all pixel-format* tests on the same machine
goes from ~58 seconds down to ~38 seconds.
v2: Test the format the plane reported, not the reduced format
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
tests/kms_plane.c | 73 +++++++++++++++++++++++++++++++++--------------
1 file changed, 51 insertions(+), 22 deletions(-)
diff --git a/tests/kms_plane.c b/tests/kms_plane.c
index c87983a4e539..f20f5bee918b 100644
--- a/tests/kms_plane.c
+++ b/tests/kms_plane.c
@@ -25,6 +25,7 @@
*/
#include "igt.h"
+#include "igt_vec.h"
#include <errno.h>
#include <stdbool.h>
#include <stdio.h>
@@ -816,16 +817,21 @@ enum crc_set { PACKED_CRC_SET,
PLANAR_CRC_SET,
MAX_CRC_SET };
+struct format_mod {
+ uint64_t modifier;
+ uint32_t format;
+};
+
static bool test_format_plane(data_t *data, enum pipe pipe,
igt_output_t *output, igt_plane_t *plane, igt_fb_t *primary_fb)
{
struct igt_fb fb = {};
struct igt_fb *clear_fb = plane->type == DRM_PLANE_TYPE_PRIMARY ? primary_fb : NULL;
drmModeModeInfo *mode;
- uint32_t format, ref_format;
- uint64_t modifier, ref_modifier;
uint64_t width, height;
igt_crc_t ref_crc[MAX_CRC_SET][ARRAY_SIZE(colors_extended)];
+ struct igt_vec tested_formats;
+ struct format_mod ref = {};
igt_crc_t* crcset;
bool result = true;
@@ -835,12 +841,14 @@ static bool test_format_plane(data_t *data, enum pipe pipe,
if (data->crop != 0 && plane->type == DRM_PLANE_TYPE_CURSOR)
return true;
+ igt_vec_init(&tested_formats, sizeof(struct format_mod));
+
mode = igt_output_get_mode(output);
if (plane->type != DRM_PLANE_TYPE_CURSOR) {
width = mode->hdisplay;
height = mode->vdisplay;
- ref_format = format = DRM_FORMAT_XRGB8888;
- ref_modifier = modifier = DRM_FORMAT_MOD_NONE;
+ ref.format = DRM_FORMAT_XRGB8888;
+ ref.modifier = DRM_FORMAT_MOD_NONE;
} else {
if (!plane->drm_plane) {
igt_debug("Only legacy cursor ioctl supported, skipping cursor plane\n");
@@ -848,8 +856,8 @@ static bool test_format_plane(data_t *data, enum pipe pipe,
}
do_or_die(drmGetCap(data->drm_fd, DRM_CAP_CURSOR_WIDTH, &width));
do_or_die(drmGetCap(data->drm_fd, DRM_CAP_CURSOR_HEIGHT, &height));
- ref_format = format = DRM_FORMAT_ARGB8888;
- ref_modifier = modifier = DRM_FORMAT_MOD_NONE;
+ ref.format = DRM_FORMAT_ARGB8888;
+ ref.modifier = DRM_FORMAT_MOD_NONE;
}
igt_debug("Testing connector %s on %s plane %s.%u\n",
@@ -859,15 +867,15 @@ static bool test_format_plane(data_t *data, enum pipe pipe,
igt_pipe_crc_start(data->pipe_crc);
igt_info("Testing format " IGT_FORMAT_FMT " / modifier 0x%" PRIx64 " on %s.%u\n",
- IGT_FORMAT_ARGS(format), modifier,
+ IGT_FORMAT_ARGS(ref.format), ref.modifier,
kmstest_pipe_name(pipe), plane->index);
if (data->display.is_atomic) {
struct igt_fb test_fb;
int ret;
- igt_create_fb(data->drm_fd, 64, 64, format,
- LOCAL_DRM_FORMAT_MOD_NONE, &test_fb);
+ igt_create_fb(data->drm_fd, 64, 64, ref.format,
+ DRM_FORMAT_MOD_LINEAR, &test_fb);
igt_plane_set_fb(plane, &test_fb);
@@ -885,12 +893,12 @@ static bool test_format_plane(data_t *data, enum pipe pipe,
igt_remove_fb(data->drm_fd, &test_fb);
}
- capture_format_crcs_packed(data, pipe, plane, format, modifier,
+ capture_format_crcs_packed(data, pipe, plane, ref.format, ref.modifier,
width, height, IGT_COLOR_YCBCR_BT709,
IGT_COLOR_YCBCR_LIMITED_RANGE,
ref_crc[PACKED_CRC_SET], &fb);
- capture_format_crcs_planar(data, pipe, plane, format, modifier,
+ capture_format_crcs_planar(data, pipe, plane, ref.format, ref.modifier,
width, height, IGT_COLOR_YCBCR_BT709,
IGT_COLOR_YCBCR_LIMITED_RANGE,
ref_crc[PLANAR_CRC_SET], &fb);
@@ -903,36 +911,55 @@ static bool test_format_plane(data_t *data, enum pipe pipe,
igt_require(num_unique_crcs(ref_crc[PLANAR_CRC_SET], data->num_colors) > 1);
for (int i = 0; i < plane->format_mod_count; i++) {
- format = plane->formats[i];
- modifier = plane->modifiers[i];
+ struct format_mod f = {
+ .format = plane->formats[i],
+ .modifier = plane->modifiers[i],
+ };
- if (format == ref_format &&
- modifier == ref_modifier)
+ if (f.format == ref.format &&
+ f.modifier == ref.modifier)
continue;
- if (format == DRM_FORMAT_C8) {
+ /* test each format "class" only once in non-extended tests */
+ if (!data->extended && f.modifier != DRM_FORMAT_MOD_LINEAR) {
+ struct format_mod rf = {
+ .format = igt_reduce_format(f.format),
+ .modifier = f.modifier,
+ };
+
+ if (igt_vec_index(&tested_formats, &rf) >= 0) {
+ igt_info("Skipping format " IGT_FORMAT_FMT " / modifier 0x%" PRIx64 " on %s.%u\n",
+ IGT_FORMAT_ARGS(f.format), f.modifier,
+ kmstest_pipe_name(pipe), plane->index);
+ continue;
+ }
+
+ igt_vec_push(&tested_formats, &rf);
+ }
+
+ if (f.format == DRM_FORMAT_C8) {
if (!set_c8_legacy_lut(data, pipe, LUT_MASK))
continue;
} else {
- if (!igt_fb_supported_format(format))
+ if (!igt_fb_supported_format(f.format))
continue;
}
- crcset = ref_crc[(igt_format_is_yuv_semiplanar(format)
+ crcset = ref_crc[(igt_format_is_yuv_semiplanar(f.format)
? PLANAR_CRC_SET : PACKED_CRC_SET)];
- if (igt_format_is_yuv(format))
+ if (igt_format_is_yuv(f.format))
result &= test_format_plane_yuv(data, pipe, plane,
- format, modifier,
+ f.format, f.modifier,
width, height,
crcset, &fb);
else
result &= test_format_plane_rgb(data, pipe, plane,
- format, modifier,
+ f.format, f.modifier,
width, height,
crcset, &fb);
- if (format == DRM_FORMAT_C8)
+ if (f.format == DRM_FORMAT_C8)
set_legacy_lut(data, pipe, LUT_MASK);
}
@@ -941,6 +968,8 @@ static bool test_format_plane(data_t *data, enum pipe pipe,
igt_plane_set_fb(plane, clear_fb);
igt_remove_fb(data->drm_fd, &fb);
+ igt_vec_fini(&tested_formats);
+
return result;
}
--
2.26.3
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev
next prev parent reply other threads:[~2021-04-07 15:27 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-29 19:00 [igt-dev] [PATCH i-g-t 1/2] tests/kms_plane: Don't test all format+modifier combinations Ville Syrjala
2021-03-29 19:00 ` [igt-dev] [PATCH i-g-t 2/2] intel-ci: Remove pixel-format-pipe-A* from the pre-merge blacklist Ville Syrjala
2021-03-30 4:08 ` Petri Latvala
2021-03-29 19:34 ` [igt-dev] ✓ Fi.CI.BAT: success for series starting with [i-g-t,1/2] tests/kms_plane: Don't test all format+modifier combinations Patchwork
2021-03-29 22:02 ` [igt-dev] ✗ Fi.CI.IGT: failure " Patchwork
2021-04-07 15:27 ` Ville Syrjala [this message]
2021-04-09 7:51 ` [igt-dev] [PATCH i-g-t v2 1/2] " Juha-Pekka Heikkila
2021-04-07 16:07 ` [igt-dev] ✓ Fi.CI.BAT: success for series starting with [i-g-t,v2,1/2] tests/kms_plane: Don't test all format+modifier combinations (rev2) Patchwork
2021-04-07 17:07 ` [igt-dev] ✓ Fi.CI.IGT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210407152726.1122-1-ville.syrjala@linux.intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=igt-dev@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox