Igt-dev Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
To: igt-dev@lists.freedesktop.org
Subject: [igt-dev] [PATCH i-g-t 5/5] tests/kms_cursor_legacy: Fix mode selection for 2x tests
Date: Sat, 10 Apr 2021 01:00:48 +0530	[thread overview]
Message-ID: <20210409193048.6857-6-bhanuprakash.modem@intel.com> (raw)
In-Reply-To: <20210409193048.6857-1-bhanuprakash.modem@intel.com>

When two monitors connected through MST, the second monitor also
tries to use the same mode. So two such modes may not fit into the
link bandwidth.

This patch will find a combination of modes that fit into the BW.

Cc: Imre Deak <imre.deak@intel.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
---
 tests/kms_cursor_legacy.c | 53 ++++++++++++++++++++++++++++++++++++---
 1 file changed, 50 insertions(+), 3 deletions(-)

diff --git a/tests/kms_cursor_legacy.c b/tests/kms_cursor_legacy.c
index 4723e1ff9..2fe11441c 100644
--- a/tests/kms_cursor_legacy.c
+++ b/tests/kms_cursor_legacy.c
@@ -50,6 +50,15 @@ IGT_TEST_DESCRIPTION("Stress legacy cursor ioctl");

 igt_pipe_crc_t *pipe_crc;

+static void override_output_modes(igt_display_t *display, igt_output_t *output, igt_output_t *output2)
+{
+	bool found = override_all_active_output_modes_to_fit_link_bw(display);
+	igt_require_f(found, "No valid mode combo found.\n");
+
+	output->pending_pipe = PIPE_NONE;
+	output2->pending_pipe = PIPE_NONE;
+}
+
 static void stress(igt_display_t *display,
 		   enum pipe pipe, int num_children, unsigned mode,
 		   int timeout)
@@ -393,6 +402,7 @@ static void flip(igt_display_t *display,
 	struct drm_mode_cursor arg[2];
 	uint64_t *results;
 	struct igt_fb fb_info, fb_info2, argb_fb, cursor_fb, cursor_fb2;
+	igt_output_t *output, *output2;

 	results = mmap(NULL, PAGE_SIZE, PROT_WRITE, MAP_SHARED | MAP_ANON, -1, 0);
 	igt_assert(results != MAP_FAILED);
@@ -406,9 +416,22 @@ static void flip(igt_display_t *display,
 	if (mode >= flip_test_atomic)
 		igt_require(display->is_atomic);

-	igt_require(set_fb_on_crtc(display, flip_pipe, &fb_info));
-	if (flip_pipe != cursor_pipe)
-		igt_require(set_fb_on_crtc(display, cursor_pipe, &fb_info2));
+	igt_require((output = set_fb_on_crtc(display, flip_pipe, &fb_info)));
+	if (flip_pipe != cursor_pipe) {
+		igt_require((output2 = set_fb_on_crtc(display, cursor_pipe, &fb_info2)));
+
+		if (output->link_group_id != 0 &&
+		    output->link_group_id == output2->link_group_id &&
+		    igt_display_try_commit_atomic(display,
+					  DRM_MODE_ATOMIC_TEST_ONLY |
+					  DRM_MODE_ATOMIC_ALLOW_MODESET,
+					  NULL) != 0) {
+			override_output_modes(display, output, output2);
+
+			igt_require((output = set_fb_on_crtc(display, flip_pipe, &fb_info)));
+			igt_require((output2 = set_fb_on_crtc(display, cursor_pipe, &fb_info2)));
+		}
+	}

 	igt_create_color_fb(display->drm_fd, fb_info.width, fb_info.height, DRM_FORMAT_ARGB8888, 0, .5, .5, .5, &cursor_fb);

@@ -879,6 +902,18 @@ static void two_screens_flip_vs_cursor(igt_display_t *display, int nloops, bool
 	igt_require((output = set_fb_on_crtc(display, pipe, &fb_info)));
 	igt_require((output2 = set_fb_on_crtc(display, pipe2, &fb2_info)));

+	if (output->link_group_id != 0 &&
+	    output->link_group_id == output2->link_group_id &&
+	    igt_display_try_commit_atomic(display,
+					  DRM_MODE_ATOMIC_TEST_ONLY |
+					  DRM_MODE_ATOMIC_ALLOW_MODESET,
+					  NULL) != 0) {
+		override_output_modes(display, output, output2);
+
+		igt_require((output = set_fb_on_crtc(display, pipe, &fb_info)));
+		igt_require((output2 = set_fb_on_crtc(display, pipe2, &fb2_info)));
+	}
+
 	igt_create_color_fb(display->drm_fd, 64, 64, DRM_FORMAT_ARGB8888, 0, 1., 1., 1., &cursor_fb);
 	set_cursor_on_pipe(display, pipe, &cursor_fb);
 	populate_cursor_args(display, pipe, arg1, &cursor_fb);
@@ -1129,6 +1164,18 @@ static void two_screens_cursor_vs_flip(igt_display_t *display, int nloops, bool
 	igt_require((outputs[0] = set_fb_on_crtc(display, pipe[0], &fb_info[0])));
 	igt_require((outputs[1] = set_fb_on_crtc(display, pipe[1], &fb_info[1])));

+	if (outputs[0]->link_group_id != 0 &&
+	    outputs[0]->link_group_id == outputs[1]->link_group_id &&
+	    igt_display_try_commit_atomic(display,
+					  DRM_MODE_ATOMIC_TEST_ONLY |
+					  DRM_MODE_ATOMIC_ALLOW_MODESET,
+					  NULL) != 0) {
+		override_output_modes(display, outputs[0], outputs[1]);
+
+		igt_require((outputs[0] = set_fb_on_crtc(display, pipe[0], &fb_info[0])));
+		igt_require((outputs[1] = set_fb_on_crtc(display, pipe[1], &fb_info[1])));
+	}
+
 	igt_create_color_fb(display->drm_fd, 64, 64, DRM_FORMAT_ARGB8888, 0, 1., 1., 1., &cursor_fb);

 	set_cursor_on_pipe(display, pipe[0], &cursor_fb);
--
2.20.1

_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev

  parent reply	other threads:[~2021-04-09 11:39 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-09 19:30 [igt-dev] [PATCH i-g-t 0/5] Fix mode selection for 2x tests Bhanuprakash Modem
2021-04-09 13:25 ` [igt-dev] ✓ Fi.CI.BAT: success for " Patchwork
2021-04-09 15:55 ` [igt-dev] ✓ Fi.CI.IGT: " Patchwork
2021-04-09 19:30 ` [igt-dev] [PATCH i-g-t 1/5] lib/igt_kms: Add a support to read PATH connector property Bhanuprakash Modem
2021-04-09 19:30 ` [igt-dev] [PATCH i-g-t 2/5] lib/igt_kms: Identify outputs that shares link bandwidth Bhanuprakash Modem
2021-04-09 19:30 ` [igt-dev] [PATCH i-g-t 3/5] lib/igt_kms: helper to override the mode on all connectors Bhanuprakash Modem
2021-04-09 19:30 ` [igt-dev] [PATCH i-g-t 4/5] tests/kms_frontbuffer_tracking: Fix mode selection for 2x tests Bhanuprakash Modem
2021-04-09 19:30 ` Bhanuprakash Modem [this message]
2021-04-09 20:18 ` [igt-dev] [PATCH i-g-t 0/5] " Daniel Vetter
2021-04-12  3:51   ` Modem, Bhanuprakash
2021-04-14 15:24     ` Daniel Vetter
2021-04-14 16:06       ` Imre Deak
2021-04-14 18:37         ` Daniel Vetter
2021-04-14 19:01           ` Imre Deak
2021-04-15 12:13             ` Nautiyal, Ankit K
2021-04-15 12:56             ` Modem, Bhanuprakash
2021-04-15 14:15               ` Daniel Vetter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210409193048.6857-6-bhanuprakash.modem@intel.com \
    --to=bhanuprakash.modem@intel.com \
    --cc=igt-dev@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox