From: Anshuman Gupta <anshuman.gupta@intel.com>
To: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
Cc: "igt-dev@lists.freedesktop.org" <igt-dev@lists.freedesktop.org>,
"Joshi, Kunal1" <kunal1.joshi@intel.com>,
"Latvala, Petri" <petri.latvala@intel.com>,
"Kunche, Kishore" <kishore.kunche@intel.com>
Subject: Re: [igt-dev] [v5 i-g-t] tests/kms_busy: Limit the execution to two pipes
Date: Mon, 24 May 2021 10:23:40 +0530 [thread overview]
Message-ID: <20210524045337.GB8620@intel.com> (raw)
In-Reply-To: <20210412165751.25441-1-bhanuprakash.modem@intel.com>
On 2021-04-12 at 22:27:51 +0530, Bhanuprakash Modem wrote:
> As all pipes are symmetric, restrict the execution to two pipes
> can save lot of CI time.
Above statement is not correct, all pipes are not symmetric,
AFAIK PIPE_A has lower power capability with DMC save/restore
(low power single pipe)
Which is even extend to PIPE_B on XE_LPD, which adds DMC save/restore
even for PIPE_B as well (low power dual pipe).
please mention the property of each pipe in commit message,
so it can be known, we should not loose any validation coverage
in order to save CI time.
This patch doesn't choose distinct crtc's to run the test.
Thanks,
Anshuman Gupta.
>
> If we want to execute on all pipes, we need to pass an extra
> argument "-e" indicates extended.
>
> Example: ./build/tests/kms_busy -e --r basic
>
> V2, V3:
> * Fix the typo in args handler (Petri)
> V4:
> * Handle clampling cleanly (Petri)
> * Restore lost test coverage in the previous version (Petri/Bhanu)
> V5:
> * Fix two subtest with the name "basic" (Petri)
>
> Cc: Karthik B S <karthik.b.s@intel.com>
> Cc: Latvala Petri <petri.latvala@intel.com>
> Cc: Kunche Kishore <kishore.kunche@intel.com>
> Cc: Uma Shankar <uma.shankar@intel.com>
> Reviewed-by: Kunal Joshi <kunal1.joshi@intel.com> (V3)
> Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
> ---
> tests/kms_busy.c | 139 ++++++++++++++++++++++++++++++-----------------
> 1 file changed, 89 insertions(+), 50 deletions(-)
>
> diff --git a/tests/kms_busy.c b/tests/kms_busy.c
> index df1f8e11a..095896db5 100644
> --- a/tests/kms_busy.c
> +++ b/tests/kms_busy.c
> @@ -30,6 +30,11 @@
>
> IGT_TEST_DESCRIPTION("Basic check of KMS ABI with busy framebuffers.");
>
> +/* restricted pipe count */
> +#define CRTC_RESTRICT_CNT 2
> +
> +static bool all_pipes = false;
> +
> static igt_output_t *
> set_fb_on_crtc(igt_display_t *dpy, int pipe, struct igt_fb *fb)
> {
> @@ -287,10 +292,41 @@ static void test_pageflip_modeset_hang(igt_display_t *dpy, enum pipe pipe)
> igt_remove_fb(dpy->drm_fd, &fb);
> }
>
> -igt_main
> +static int opt_handler(int opt, int opt_index, void *data)
> +{
> + switch (opt) {
> + case 'e':
> + all_pipes = true;
> + break;
> + default:
> + return IGT_OPT_HANDLER_ERROR;
> + }
> +
> + return IGT_OPT_HANDLER_SUCCESS;
> +}
> +
> +const char *help_str =
> + " -e \tRun on all pipes. (By default subtests will run on two pipes)\n";
> +
> +igt_main_args("e", NULL, help_str, opt_handler, NULL)
> {
> igt_display_t display = { .drm_fd = -1, .n_pipes = IGT_MAX_PIPES };
> - enum pipe n;
> +
> + int crtc_count;
> + int i;
> + struct {
> + const char *name;
> + bool modeset;
> + bool hang_newfb;
> + bool reset;
> + } tests[] = {
> + { "extended-pageflip-hang-oldfb", false, false, false },
> + { "extended-pageflip-hang-newfb", false, true, false },
> + { "extended-modeset-hang-oldfb", true, false, false },
> + { "extended-modeset-hang-newfb", true, true, false },
> + { "extended-modeset-hang-oldfb-with-reset", true, false, true },
> + { "extended-modeset-hang-newfb-with-reset", true, true, true },
> + };
>
> igt_fixture {
> int fd = drm_open_driver_master(DRIVER_INTEL);
> @@ -318,70 +354,73 @@ igt_main
> }
> }
>
> - for_each_pipe_static(n) igt_subtest_group {
> - igt_hang_t hang;
> -
> + igt_subtest_with_dynamic("basic-hang") {
> + enum pipe pipe;
> + igt_output_t *output;
> + int count = 0;
> + igt_hang_t hang = igt_allow_hang(display.drm_fd, 0, 0);
> errno = 0;
>
> - igt_fixture {
> - igt_display_require_output_on_pipe(&display, n);
> - }
> -
> - igt_subtest_f("basic-flip-pipe-%s", kmstest_pipe_name(n)) {
> - test_flip(&display, n, false);
> - }
> - igt_subtest_f("basic-modeset-pipe-%s", kmstest_pipe_name(n)) {
> -
> - test_flip(&display, n, true);
> - }
> -
> - igt_fixture {
> - hang = igt_allow_hang(display.drm_fd, 0, 0);
> - }
> + crtc_count = (all_pipes)? display.n_pipes : CRTC_RESTRICT_CNT;
> + for_each_pipe_with_valid_output(&display, pipe, output) {
> + igt_dynamic_f("flip-pipe-%s", kmstest_pipe_name(pipe))
> + test_flip(&display, pipe, false);
> + igt_dynamic_f("modeset-pipe-%s", kmstest_pipe_name(pipe))
> + test_flip(&display, pipe, true);
>
> - igt_subtest_f("extended-pageflip-modeset-hang-oldfb-pipe-%s",
> - kmstest_pipe_name(n)) {
> - test_pageflip_modeset_hang(&display, n);
> + if (++count >= crtc_count)
> + break;
> }
>
> - igt_fixture
> - igt_require(display.is_atomic);
> + igt_disallow_hang(display.drm_fd, hang);
> + }
>
> - igt_subtest_f("extended-pageflip-hang-oldfb-pipe-%s",
> - kmstest_pipe_name(n))
> - test_hang(&display, n, false, false);
> + igt_subtest_with_dynamic("extended-pageflip-modeset-hang-oldfb") {
> + enum pipe pipe;
> + igt_output_t *output;
> + int count = 0;
> + igt_hang_t hang = igt_allow_hang(display.drm_fd, 0, 0);
> + errno = 0;
>
> - igt_subtest_f("extended-pageflip-hang-newfb-pipe-%s",
> - kmstest_pipe_name(n))
> - test_hang(&display, n, false, true);
> + crtc_count = (all_pipes)? display.n_pipes : CRTC_RESTRICT_CNT;
> + for_each_pipe_with_valid_output(&display, pipe, output) {
> + igt_dynamic_f("pipe-%s", kmstest_pipe_name(pipe))
> + test_pageflip_modeset_hang(&display, pipe);
>
> - igt_subtest_f("extended-modeset-hang-oldfb-pipe-%s",
> - kmstest_pipe_name(n))
> - test_hang(&display, n, true, false);
> + if (++count >= crtc_count)
> + break;
> + }
>
> - igt_subtest_f("extended-modeset-hang-newfb-pipe-%s",
> - kmstest_pipe_name(n))
> - test_hang(&display, n, true, true);
> + igt_disallow_hang(display.drm_fd, hang);
> + }
>
> - igt_subtest_f("extended-modeset-hang-oldfb-with-reset-pipe-%s",
> - kmstest_pipe_name(n)) {
> - igt_set_module_param_int(display.drm_fd, "force_reset_modeset_test", 1);
> + for (i = 0; i < sizeof(tests) / sizeof (tests[0]); i++) {
> + igt_subtest_with_dynamic(tests[i].name) {
> + enum pipe pipe;
> + igt_output_t *output;
> + int count = 0;
> + igt_hang_t hang;
> + errno = 0;
>
> - test_hang(&display, n, true, false);
> + igt_require(display.is_atomic);
> + hang = igt_allow_hang(display.drm_fd, 0, 0);
>
> - igt_set_module_param_int(display.drm_fd, "force_reset_modeset_test", 0);
> - }
> + crtc_count = (all_pipes)? display.n_pipes : CRTC_RESTRICT_CNT;
> + for_each_pipe_with_valid_output(&display, pipe, output) {
> + igt_dynamic_f("pipe-%s", kmstest_pipe_name(pipe)) {
> + if (tests[i].reset)
> + igt_set_module_param_int(display.drm_fd, "force_reset_modeset_test", 1);
>
> - igt_subtest_f("extended-modeset-hang-newfb-with-reset-pipe-%s",
> - kmstest_pipe_name(n)) {
> - igt_set_module_param_int(display.drm_fd, "force_reset_modeset_test", 1);
> + test_hang(&display, pipe, tests[i].modeset, tests[i].hang_newfb);
>
> - test_hang(&display, n, true, true);
> + if (tests[i].reset)
> + igt_set_module_param_int(display.drm_fd, "force_reset_modeset_test", 0);
> + }
>
> - igt_set_module_param_int(display.drm_fd, "force_reset_modeset_test", 0);
> - }
> + if (++count >= crtc_count)
> + break;
> + }
>
> - igt_fixture {
> igt_disallow_hang(display.drm_fd, hang);
> }
> }
> --
> 2.20.1
>
> _______________________________________________
> igt-dev mailing list
> igt-dev@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/igt-dev
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev
next prev parent reply other threads:[~2021-05-24 5:09 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-12 16:57 [igt-dev] [v5 i-g-t] tests/kms_busy: Limit the execution to two pipes Bhanuprakash Modem
2021-04-12 9:57 ` [igt-dev] ✓ Fi.CI.BAT: success for tests/kms_busy: Limit the execution to two pipes (rev5) Patchwork
2021-04-12 11:00 ` [igt-dev] ✓ Fi.CI.IGT: " Patchwork
2021-05-24 4:53 ` Anshuman Gupta [this message]
2021-05-24 8:52 ` [igt-dev] [v5 i-g-t] tests/kms_busy: Limit the execution to two pipes Modem, Bhanuprakash
2021-05-26 8:05 ` Gupta, Anshuman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210524045337.GB8620@intel.com \
--to=anshuman.gupta@intel.com \
--cc=bhanuprakash.modem@intel.com \
--cc=igt-dev@lists.freedesktop.org \
--cc=kishore.kunche@intel.com \
--cc=kunal1.joshi@intel.com \
--cc=petri.latvala@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox