From: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
To: igt-dev@lists.freedesktop.org
Subject: [igt-dev] [V2 i-g-t] tests/kms_cursor_crc: Fix SIGABRT in dynamic subtests
Date: Fri, 4 Nov 2022 07:30:05 +0530 [thread overview]
Message-ID: <20221104020005.4098049-1-bhanuprakash.modem@intel.com> (raw)
In-Reply-To: <20221102110428.4049549-1-bhanuprakash.modem@intel.com>
All subtests must report success/fail instead of crashing out.
V2:
- Fix the coverage of max-size tests
Fixes: 9494d53d ("tests/kms_cursor_crc: Convert tests to dynamic")
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Alaa Emad <aemad@igalia.com>
Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
---
tests/kms_cursor_crc.c | 128 ++++++++++++++++++++++-------------------
1 file changed, 68 insertions(+), 60 deletions(-)
diff --git a/tests/kms_cursor_crc.c b/tests/kms_cursor_crc.c
index d51c1f90..68bed666 100644
--- a/tests/kms_cursor_crc.c
+++ b/tests/kms_cursor_crc.c
@@ -700,65 +700,78 @@ static void test_rapid_movement(data_t *data)
igt_assert_lt(usec, 0.9 * 400 * 1000000 / data->refresh);
}
-static void run_size_tests(data_t *data, void (*testfunc)(data_t *),
- int w, int h)
+static void run_size_tests(data_t *data, int w, int h)
{
enum pipe pipe;
+ struct {
+ const char *name;
+ void (*testfunc)(data_t *);
+ const char *desc;
+ } size_tests[] = {
+ { "cursor-onscreen", test_crc_onscreen,
+ "Check if a given-size cursor is well-positioned inside the screen." },
+ { "cursor-offscreen", test_crc_offscreen,
+ "Check if a given-size cursor is well-positioned outside the screen." },
+ { "cursor-sliding", test_crc_sliding,
+ "Check the smooth and pixel-by-pixel given-size cursor movements on horizontal, vertical and diagonal." },
+ { "cursor-random", test_crc_random,
+ "Check random placement of a cursor with given size." },
+ { "cursor-rapid-movement", test_rapid_movement,
+ "Check the rapid update of given-size cursor movements." },
+ };
+ int i;
+ char name[16];
if (w == 0 && h == 0) {
w = data->cursor_max_w;
h = data->cursor_max_h;
- /*
- * No point in doing the "max-size" test if
- * it was already covered by the other tests.
- */
- if ((w == h) && (w <= 512) && (h <= 512) &&
- is_power_of_two(w) && is_power_of_two(h)) {
- igt_info("Cursor max size %dx%d already covered by other tests\n", w, h);
- return;
- }
+ strcpy(name, "max-size");
+ } else {
+ snprintf(name, sizeof(name), "%dx%d", w, h);
}
- create_cursor_fb(data, w, h);
- if (require_cursor_size(data, w, h)) {
- igt_info("Cursor size %dx%d not supported by driver\n", w, h);
+ igt_fixture
+ create_cursor_fb(data, w, h);
- igt_remove_fb(data->drm_fd, &data->fb);
- return;
- }
+ for (i = 0; i < ARRAY_SIZE(size_tests); i++) {
+ igt_describe(size_tests[i].desc);
+ igt_subtest_with_dynamic_f("%s-%s", size_tests[i].name, name) {
+ if (!strcmp(name, "max-size")) {
+ /*
+ * No point in doing the "max-size" test if
+ * it was already covered by the other tests.
+ */
+ if ((w == h) && (w <= 512) && (h <= 512) &&
+ is_power_of_two(w) && is_power_of_two(h)) {
+ igt_info("Cursor max size %dx%d already covered by other tests\n", w, h);
+ continue;
+ }
+ }
+
+ for_each_pipe(&data->display, pipe) {
+ data->pipe = pipe;
- for_each_pipe(&data->display, pipe) {
- data->pipe = pipe;
- igt_dynamic_f("pipe-%s-%s",
- kmstest_pipe_name(pipe), igt_output_name(data->output))
- run_test(data, testfunc, w, h);
+ if (require_cursor_size(data, w, h)) {
+ igt_info("Cursor size %dx%d not supported by driver\n", w, h);
+ continue;
+ }
+
+ igt_dynamic_f("pipe-%s-%s",
+ kmstest_pipe_name(pipe), igt_output_name(data->output))
+ run_test(data, size_tests[i].testfunc, w, h);
+ }
+ }
}
- igt_remove_fb(data->drm_fd, &data->fb);
+ igt_fixture
+ igt_remove_fb(data->drm_fd, &data->fb);
}
static void run_tests_on_pipe(data_t *data)
{
enum pipe pipe;
int cursor_size;
- int i;
- struct {
- const char *name;
- void (*testfunc)(data_t *);
- const char *desc;
- } size_tests[] = {
- { "cursor-onscreen", test_crc_onscreen,
- "Check if a given-size cursor is well-positioned inside the screen." },
- { "cursor-offscreen", test_crc_offscreen,
- "Check if a given-size cursor is well-positioned outside the screen." },
- { "cursor-sliding", test_crc_sliding,
- "Check the smooth and pixel-by-pixel given-size cursor movements on horizontal, vertical and diagonal." },
- { "cursor-random", test_crc_random,
- "Check random placement of a cursor with given size." },
- { "cursor-rapid-movement", test_rapid_movement,
- "Check the rapid update of given-size cursor movements." },
- };
igt_fixture {
data->output = igt_get_single_output_for_pipe(&data->display, pipe);
@@ -859,30 +872,25 @@ static void run_tests_on_pipe(data_t *data)
igt_fixture
igt_remove_fb(data->drm_fd, &data->fb);
- for (i = 0; i < ARRAY_SIZE(size_tests); i++) {
- igt_describe(size_tests[i].desc);
- igt_subtest_group {
- for (cursor_size = 32; cursor_size <= 512; cursor_size *= 2) {
- int w = cursor_size;
- int h = cursor_size;
+ for (cursor_size = 32; cursor_size <= 512; cursor_size *= 2) {
+ int w = cursor_size;
+ int h = cursor_size;
- igt_subtest_with_dynamic_f("%s-%dx%d", size_tests[i].name, w, h)
- run_size_tests(data, size_tests[i].testfunc, w, h);
+ igt_subtest_group
+ run_size_tests(data, w, h);
- /*
- * Test non-square cursors a bit on the platforms
- * that support such things. And make it a bit more
- * interesting by using a non-pot height.
- */
- h /= 3;
- igt_subtest_with_dynamic_f("%s-%dx%d", size_tests[i].name, w, h)
- run_size_tests(data, size_tests[i].testfunc, w, h);
- }
+ /*
+ * Test non-square cursors a bit on the platforms
+ * that support such things. And make it a bit more
+ * interesting by using a non-pot height.
+ */
+ h /= 3;
- igt_subtest_with_dynamic_f("%s-max-size", size_tests[i].name)
- run_size_tests(data, size_tests[i].testfunc, 0, 0);
- }
+ igt_subtest_group
+ run_size_tests(data, w, h);
}
+
+ run_size_tests(data, 0, 0);
}
static data_t data;
--
2.38.0
next prev parent reply other threads:[~2022-11-04 2:00 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-02 11:04 [igt-dev] [i-g-t] tests/kms_cursor_crc: Fix SIGABRT in dynamic subtests Bhanuprakash Modem
2022-11-02 12:11 ` [igt-dev] ✗ GitLab.Pipeline: warning for " Patchwork
2022-11-02 12:28 ` [igt-dev] ✓ Fi.CI.BAT: success " Patchwork
2022-11-02 17:32 ` [igt-dev] ✗ Fi.CI.IGT: failure " Patchwork
2022-11-04 2:00 ` Bhanuprakash Modem [this message]
2022-11-07 5:36 ` [igt-dev] [V2 i-g-t] " Modem, Bhanuprakash
2022-11-08 16:19 ` aemad
2022-11-08 16:21 ` aemad
2022-11-07 22:47 ` Melissa Wen
2022-11-08 16:18 ` Melissa Wen
2022-11-14 20:08 ` Dixit, Ashutosh
2022-11-15 4:52 ` Modem, Bhanuprakash
2022-11-04 2:55 ` [igt-dev] ✓ Fi.CI.BAT: success for tests/kms_cursor_crc: Fix SIGABRT in dynamic subtests (rev2) Patchwork
2022-11-04 20:49 ` [igt-dev] ✗ Fi.CI.IGT: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221104020005.4098049-1-bhanuprakash.modem@intel.com \
--to=bhanuprakash.modem@intel.com \
--cc=igt-dev@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox