From: Swati Sharma <swati2.sharma@intel.com>
To: igt-dev@lists.freedesktop.org
Cc: petri.latvala@intel.com
Subject: [igt-dev] [PATCH i-g-t 7/8] tests/i915/kms_dsc: Enable validation for VDSC Fractional BPP
Date: Mon, 9 Jan 2023 20:58:30 +0530 [thread overview]
Message-ID: <20230109152832.3310-8-swati2.sharma@intel.com> (raw)
In-Reply-To: <20230109152832.3310-1-swati2.sharma@intel.com>
Fractional BPP support comes from DSC1.2. To test Fractional BPP, debugfs entry
(force_dsc_fractional_bpp) is introduced. From the IGT; we are setting this
debugfs entry. However, before setting this debugfs entry, we are checking
capability i.e. Fractional BPP is supported by platform and sink both. In driver,
if force_dsc_fractional_bpp is set then while iterating over output bpp with
fractional step size we will continue if output_bpp is computed as integer and
allow DSC iff compressed bpp is fractional.
v2: change in igt_describe (Ankit)
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
---
tests/i915/kms_dsc.c | 27 ++++++++++++---
tests/i915/kms_dsc_helper.c | 66 +++++++++++++++++++++++++++++++++++++
tests/i915/kms_dsc_helper.h | 4 +++
3 files changed, 93 insertions(+), 4 deletions(-)
diff --git a/tests/i915/kms_dsc.c b/tests/i915/kms_dsc.c
index 689cb81b1..963d9f008 100644
--- a/tests/i915/kms_dsc.c
+++ b/tests/i915/kms_dsc.c
@@ -36,7 +36,8 @@ IGT_TEST_DESCRIPTION("Test to validate display stream compression");
enum dsc_test_type {
TEST_DSC_BASIC,
- TEST_DSC_BPC
+ TEST_DSC_BPC,
+ TEST_DSC_FRACTIONAL_BPP
};
const struct {
@@ -139,6 +140,10 @@ static void update_display(data_t *data, enum dsc_test_type test_type,
if (test_type == TEST_DSC_BPC) {
igt_debug("Trying to set input BPC to %d\n", data->input_bpc);
force_dsc_enable_bpc(data);
+ } else if (test_type == TEST_DSC_FRACTIONAL_BPP) {
+ igt_debug("DSC fractional bpp is supported on %s\n", data->output->name);
+ save_force_dsc_fractional_bpp_en(data);
+ force_dsc_fractional_bpp_enable(data);
}
igt_output_set_pipe(output, data->pipe);
@@ -192,9 +197,12 @@ static void update_display(data_t *data, enum dsc_test_type test_type,
if (output_format == DSC_FORMAT_YCBCR420)
restore_force_dsc_ycbcr420_en();
- igt_debug("Reset input BPC\n");
- data->input_bpc = 0;
- force_dsc_enable_bpc(data);
+ if (test_type == TEST_DSC_BPC) {
+ igt_debug("Reset input BPC\n");
+ data->input_bpc = 0;
+ force_dsc_enable_bpc(data);
+ } else if (test_type == TEST_DSC_FRACTIONAL_BPP)
+ restore_force_dsc_fractional_bpp_en();
igt_assert_f(enabled,
"Default DSC enable failed on connector: %s pipe: %s\n",
@@ -230,6 +238,9 @@ static void test_dsc(data_t *data, enum dsc_test_type test_type, int bpc,
if (!check_big_joiner_pipe_constraint(data))
continue;
+ if ((test_type == TEST_DSC_FRACTIONAL_BPP) && !(check_dsc_fractional_bpp_on_connector(data)))
+ continue;
+
if (test_type == TEST_DSC_BPC)
snprintf(name, sizeof(name), "-%dbpc-%s", data->input_bpc, igt_format_str(plane_format));
else
@@ -302,6 +313,14 @@ igt_main
}
}
+ igt_describe("Tests fractional compressed bpp functionality if supported "
+ "by a connector by forcing fractional_bpp on all connectors that support it "
+ "with default parameter. While finding the optimum compressed bpp, driver will "
+ "skip over the compressed bpps with integer values. It will go ahead with DSC, "
+ "iff compressed bpp is fractional, failing in which, it will fail the commit.");
+ igt_subtest_with_dynamic("dsc-fractional-bpp")
+ run_test(&data, TEST_DSC_FRACTIONAL_BPP, 0, DRM_FORMAT_XRGB8888);
+
igt_fixture {
igt_display_fini(&data.display);
close(data.drm_fd);
diff --git a/tests/i915/kms_dsc_helper.c b/tests/i915/kms_dsc_helper.c
index 8f0326f13..eef0f2c4b 100644
--- a/tests/i915/kms_dsc_helper.c
+++ b/tests/i915/kms_dsc_helper.c
@@ -31,8 +31,10 @@
bool force_dsc_en_orig;
bool force_dsc_ycbcr420_en_orig;
+bool force_dsc_fractional_bpp_en_orig;
int force_dsc_restore_fd = -1;
int force_dsc_ycbcr420_restore_fd = -1;
+int force_dsc_fractional_bpp_restore_fd = -1;
void force_dsc_enable(data_t *data)
{
@@ -83,6 +85,7 @@ void kms_dsc_exit_handler(int sig)
{
restore_force_dsc_en();
restore_force_dsc_ycbcr420_en();
+ restore_force_dsc_fractional_bpp_en();
}
bool check_dsc_on_connector(data_t *data)
@@ -178,3 +181,66 @@ bool is_dsc_ycbcr420_supported(data_t *data)
return true;
}
+
+void force_dsc_fractional_bpp_enable(data_t *data)
+{
+ int ret;
+
+ igt_debug("Forcing DSC Fractional BPP on %s\n", data->output->name);
+ ret = igt_force_dsc_fractional_bpp_enable(data->drm_fd,
+ data->output->name);
+ igt_assert_f(ret > 0, "forcing dsc fractional bpp debugfs_write failed\n");
+}
+
+void save_force_dsc_fractional_bpp_en(data_t *data)
+{
+ force_dsc_fractional_bpp_en_orig =
+ igt_is_force_dsc_fractional_bpp_enabled(data->drm_fd,
+ data->output->name);
+ force_dsc_fractional_bpp_restore_fd =
+ igt_get_dsc_fractional_bpp_debugfs_fd(data->drm_fd,
+ data->output->name);
+ igt_assert(force_dsc_fractional_bpp_restore_fd >= 0);
+}
+
+void restore_force_dsc_fractional_bpp_en(void)
+{
+ if (force_dsc_fractional_bpp_restore_fd < 0)
+ return;
+
+ igt_debug("Restoring DSC Fractional BPP enable\n");
+ igt_assert(write(force_dsc_fractional_bpp_restore_fd, force_dsc_fractional_bpp_en_orig ? "1" : "0", 1) == 1);
+
+ close(force_dsc_fractional_bpp_restore_fd);
+ force_dsc_fractional_bpp_restore_fd = -1;
+}
+
+static
+bool is_dsc_fractional_bpp_supported(int drmfd, char *connector_name)
+{
+ int bpp_prec;
+
+ bpp_prec = igt_get_dsc_fractional_bpp_supported(drmfd, connector_name);
+
+ if (bpp_prec == 1)
+ return false;
+
+ return true;
+}
+
+bool check_dsc_fractional_bpp_on_connector(data_t *data)
+{
+ igt_output_t *output = data->output;
+
+ if (data->disp_ver >= 14) {
+ if (!is_dsc_fractional_bpp_supported(data->drm_fd, output->name)) {
+ igt_debug("DSC fractional bpp not supported on connector %s\n",
+ output->name);
+ return false;
+ } else
+ return true;
+ }
+
+ return false;
+}
+
diff --git a/tests/i915/kms_dsc_helper.h b/tests/i915/kms_dsc_helper.h
index 57cb67737..9376b11ef 100644
--- a/tests/i915/kms_dsc_helper.h
+++ b/tests/i915/kms_dsc_helper.h
@@ -66,5 +66,9 @@ void force_dsc_ycbcr420_enable(data_t *data);
void save_force_dsc_ycbcr420_en(data_t *data);
void restore_force_dsc_ycbcr420_en(void);
bool is_dsc_ycbcr420_supported(data_t *data);
+void force_dsc_fractional_bpp_enable(data_t *data);
+void save_force_dsc_fractional_bpp_en(data_t *data);
+void restore_force_dsc_fractional_bpp_en(void);
+bool check_dsc_fractional_bpp_on_connector(data_t *data);
#endif
--
2.25.1
next prev parent reply other threads:[~2023-01-09 15:27 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-09 15:28 [igt-dev] [PATCH i-g-t 0/8] VDSC YCbCr420 + Fractional BPP Swati Sharma
2023-01-09 15:28 ` [igt-dev] [PATCH i-g-t 1/8] lib/dsc: Move VDSC functions to separate lib file Swati Sharma
2023-01-09 15:28 ` [igt-dev] [PATCH i-g-t 2/8] Move wrapper functions from kms_dsc to kms_dsc_helper Swati Sharma
2023-01-10 10:54 ` Hogander, Jouni
2023-01-09 15:28 ` [igt-dev] [PATCH i-g-t 3/8] lib/dsc: Add helpers for VDSC YCbCr420 debugfs entry Swati Sharma
2023-01-09 15:28 ` [igt-dev] [PATCH i-g-t 4/8] tests/i915/kms_dsc: Prep work for extending val support for VDSC YCbCr420 Swati Sharma
2023-01-09 15:28 ` [igt-dev] [PATCH i-g-t 5/8] tests/i915/kms_dsc: Enable validation " Swati Sharma
2023-01-10 11:56 ` Hogander, Jouni
2023-01-11 6:38 ` Swati Sharma
2023-01-09 15:28 ` [igt-dev] [PATCH i-g-t 6/8] lib/dsc: Add helpers for VDSC Fractional BPP debugfs entry Swati Sharma
2023-01-09 15:28 ` Swati Sharma [this message]
2023-01-09 15:28 ` [igt-dev] [PATCH i-g-t 8/8] tests/i915/kms_dsc: Add test summary Swati Sharma
2023-01-09 18:04 ` [igt-dev] ✗ GitLab.Pipeline: warning for VDSC YCbCr420 + Fractional BPP (rev2) Patchwork
2023-01-09 18:34 ` [igt-dev] ✓ Fi.CI.BAT: success " Patchwork
2023-01-10 1:34 ` [igt-dev] ✓ Fi.CI.IGT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230109152832.3310-8-swati2.sharma@intel.com \
--to=swati2.sharma@intel.com \
--cc=igt-dev@lists.freedesktop.org \
--cc=petri.latvala@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox