Igt-dev Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Swati Sharma <swati2.sharma@intel.com>
To: igt-dev@lists.freedesktop.org
Subject: [igt-dev] [PATCH i-g-t v2 2/2] tests/kms_hdr: Add negative test to enforce HDR on non-HDR panel
Date: Wed, 22 Feb 2023 17:25:24 +0530	[thread overview]
Message-ID: <20230222115524.10512-3-swati2.sharma@intel.com> (raw)
In-Reply-To: <20230222115524.10512-1-swati2.sharma@intel.com>

Negative test is added to ensure HDR is not enabled on
a non-HDR panel.
Commit/modeset won't fail. However, in dmesg we can find

[drm:drm_hdmi_infoframe_set_hdr_metadata [drm_display_helper]]
EOTF Not Supported

v2: -fixed nitpicks (Kamil)

Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
---
 tests/kms_hdr.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/tests/kms_hdr.c b/tests/kms_hdr.c
index 46b28b960..36669ce81 100644
--- a/tests/kms_hdr.c
+++ b/tests/kms_hdr.c
@@ -51,6 +51,7 @@ enum {
 	TEST_SUSPEND = 1 << 2,
 	TEST_SWAP = 1 << 3,
 	TEST_INVALID_METADATA_SIZES = 1 << 4,
+	TEST_INVALID_HDR = 1 << 5,
 };
 
 /* BPC connector state. */
@@ -414,6 +415,10 @@ static void test_static_toggle(data_t *data, enum pipe pipe,
 	set_hdr_output_metadata(data, &hdr);
 	igt_output_set_prop_value(data->output, IGT_CONNECTOR_MAX_BPC, 10);
 	igt_display_commit_atomic(display, DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
+	if (flags & TEST_INVALID_HDR) {
+		igt_assert_eq(system("dmesg|tail -n 1000|grep -E \"EOTF Not Supported\""), 0);
+		goto cleanup;
+	}
 	igt_assert_output_bpc_equal(data->fd, pipe, output->name, 10);
 
 	/* Verify that the CRC are equal after DPMS or suspend. */
@@ -429,6 +434,7 @@ static void test_static_toggle(data_t *data, enum pipe pipe,
 
 	igt_assert_crc_equal(&ref_crc, &new_crc);
 
+cleanup:
 	test_fini(data);
 	igt_remove_fb(data->fd, &afb);
 }
@@ -567,7 +573,11 @@ static void test_hdr(data_t *data, uint32_t flags)
 		if (!has_max_bpc(output) || !has_hdr(output))
 			continue;
 
-		if (!is_panel_hdr(data, output))
+		/* For negative test, panel should be non-hdr. */
+		if ((flags & TEST_INVALID_HDR) && is_panel_hdr(data, output))
+			continue;
+
+		if ((flags & ~TEST_INVALID_HDR) && !is_panel_hdr(data, output))
 			continue;
 
 		if (igt_get_output_max_bpc(data->fd, output->name) < 10)
@@ -589,7 +599,7 @@ static void test_hdr(data_t *data, uint32_t flags)
 
 				igt_dynamic_f("pipe-%s-%s",
 					      kmstest_pipe_name(pipe), output->name) {
-					if (flags & TEST_NONE || flags & TEST_DPMS || flags & TEST_SUSPEND)
+					if (flags & (TEST_NONE | TEST_DPMS | TEST_SUSPEND | TEST_INVALID_HDR))
 						test_static_toggle(data, pipe, output, flags);
 					if (flags & TEST_SWAP)
 						test_static_swap(data, pipe, output);
@@ -647,6 +657,10 @@ igt_main
 	igt_subtest_with_dynamic("invalid-metadata-sizes")
 		test_hdr(&data, TEST_INVALID_METADATA_SIZES);
 
+	igt_describe("Test to ensure HDR is not enabled on non-HDR panel");
+	igt_subtest_with_dynamic("invalid-hdr")
+		test_hdr(&data, TEST_INVALID_HDR);
+
 	igt_fixture {
 		igt_display_fini(&data.display);
 		close(data.fd);
-- 
2.25.1

  parent reply	other threads:[~2023-02-22 11:53 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-02-22 11:55 [igt-dev] [PATCH i-g-t v2 0/2] Add HDR negative tests Swati Sharma
2023-02-22 11:55 ` [igt-dev] [PATCH i-g-t v2 1/2] tests/kms_hdr: Add negative test for invalid metadata sizes Swati Sharma
2023-02-22 11:55 ` Swati Sharma [this message]
2023-02-22 15:19 ` [igt-dev] ✓ Fi.CI.BAT: success for Add HDR negative tests (rev4) Patchwork
2023-02-22 19:01 ` [igt-dev] ✓ Fi.CI.IGT: " Patchwork
  -- strict thread matches above, loose matches on Subject: below --
2023-02-22 10:48 [igt-dev] [PATCH i-g-t v2 0/2] Add HDR negative tests Swati Sharma
2023-02-22 10:48 ` [igt-dev] [PATCH i-g-t v2 2/2] tests/kms_hdr: Add negative test to enforce HDR on non-HDR panel Swati Sharma
2023-02-22 14:35   ` Kamil Konieczny
2023-02-23  7:26     ` Swati Sharma

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230222115524.10512-3-swati2.sharma@intel.com \
    --to=swati2.sharma@intel.com \
    --cc=igt-dev@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox