From: Mohammed Thasleem <mohammed.thasleem@intel.com>
To: igt-dev@lists.freedesktop.org
Subject: [igt-dev] [PATCH i-g-t 2/2] tests/i915/i915_pm_dc: Add DC6 PSR test for mtl
Date: Thu, 16 Mar 2023 02:31:47 +0530 [thread overview]
Message-ID: <20230315210147.19557-3-mohammed.thasleem@intel.com> (raw)
In-Reply-To: <20230315210147.19557-1-mohammed.thasleem@intel.com>
The flow for DC6 validation has changed for MTL.
DC6 state achieved based on PKGC10 entry.
This test validates PKGC10 entry and confirm DC6 achieved.
Signed-off-by: Mohammed Thasleem <mohammed.thasleem@intel.com>
---
tests/i915/i915_pm_dc.c | 54 ++++++++++++++++++++++++++++++++++++++++-
1 file changed, 53 insertions(+), 1 deletion(-)
diff --git a/tests/i915/i915_pm_dc.c b/tests/i915/i915_pm_dc.c
index 322a0c60..ed573ce6 100644
--- a/tests/i915/i915_pm_dc.c
+++ b/tests/i915/i915_pm_dc.c
@@ -407,6 +407,38 @@ static void dpms_on(data_t *data)
(IGT_RUNTIME_PM_STATUS_ACTIVE));
}
+static void psr_pkc_enable(data_t *data)
+{
+ igt_output_t *output;
+
+ for_each_connected_output(&data->display, output) {
+ drmModeConnectorPtr c = output->config.connector;
+
+ if (c->connector_type == DRM_MODE_CONNECTOR_eDP)
+ continue;
+
+ kmstest_set_connector_dpms(data->drm_fd,
+ data->display.outputs->config.connector,
+ DRM_MODE_DPMS_OFF);
+ }
+}
+
+static void psr_pkc_disable(data_t *data)
+{
+ igt_output_t *output;
+
+ for_each_connected_output(&data->display, output) {
+ drmModeConnectorPtr c = output->config.connector;
+
+ if (c->connector_type == DRM_MODE_CONNECTOR_eDP)
+ continue;
+
+ kmstest_set_connector_dpms(data->drm_fd,
+ data->display.outputs->config.connector,
+ DRM_MODE_DPMS_ON);
+ }
+}
+
static void test_dc_state_dpms(data_t *data, int dc_flag)
{
uint32_t dc_counter;
@@ -551,6 +583,23 @@ static void test_pkc_state_dpms(data_t *data)
dpms_on(data);
}
+static void test_pkc_state_psr(data_t *data)
+{
+ unsigned int timeout_msec = 30;
+ unsigned int prev_value = 0, cur_value = 0;
+
+ prev_value = read_pkc_state_value(data->pmc_fd);
+ setup_output(data);
+ setup_primary(data);
+ igt_assert(psr_wait_entry(data->debugfs_fd, data->op_psr_mode));
+ psr_pkc_enable(data);
+ cleanup_dc_psr(data);
+ igt_wait((cur_value = read_pkc_state_value(data->pmc_fd)),
+ timeout_msec * 1000, 100);
+ igt_assert_f(cur_value > prev_value, "PK10 is not achieived.\n");
+ psr_pkc_disable(data);
+}
+
static void kms_poll_state_restore(int sig)
{
int sysfs_fd;
@@ -609,7 +658,10 @@ igt_main
psr_enable(data.drm_fd, data.debugfs_fd, data.op_psr_mode);
igt_require_f(igt_pm_pc8_plus_residencies_enabled(data.msr_fd),
"PC8+ residencies not supported\n");
- test_dc_state_psr(&data, CHECK_DC6);
+ if (intel_display_ver(data.devid) == 14)
+ test_pkc_state_psr(&data);
+ else
+ test_dc_state_psr(&data, CHECK_DC6);
}
igt_describe("This test validates display engine entry to DC5 state "
--
2.25.1
next prev parent reply other threads:[~2023-03-15 21:05 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-15 21:01 [igt-dev] [PATCH i-g-t 0/2] tests/i915/i915_pm_dc: Add DC6 test for mtl Mohammed Thasleem
2023-03-15 21:01 ` [igt-dev] [PATCH i-g-t 1/2] tests/i915/i915_pm_dc: Add DC6 DPMS " Mohammed Thasleem
2023-03-21 22:56 ` Imre Deak
2023-03-27 19:30 ` [igt-dev] [PATCH v3 " Mohammed Thasleem
2023-03-28 19:34 ` Imre Deak
2023-03-15 21:01 ` Mohammed Thasleem [this message]
2023-03-27 10:26 ` [igt-dev] [PATCH i-g-t 2/2] tests/i915/i915_pm_dc: Add DC6 PSR " Hogander, Jouni
2023-04-04 12:10 ` Hogander, Jouni
2023-03-15 22:05 ` [igt-dev] ✓ Fi.CI.BAT: success for tests/i915/i915_pm_dc: Add DC6 test for mtl (rev2) Patchwork
2023-03-16 6:25 ` [igt-dev] ✓ Fi.CI.IGT: " Patchwork
2023-03-27 19:57 ` [igt-dev] ✗ Fi.CI.BUILD: failure for tests/i915/i915_pm_dc: Add DC6 test for mtl (rev3) Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230315210147.19557-3-mohammed.thasleem@intel.com \
--to=mohammed.thasleem@intel.com \
--cc=igt-dev@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox