[igt-dev] [PATCH i-g-t 2/2] i915/i915_power: Also show requested and actual freq's

[Ashutosh Dixit <ashutosh.dixit@intel.com>]

When power limits are in effect, in addition to measured power it is also
important to see the requested and actual freq's and see how they change
with set power limits. Add this to the test output.

v2: Display power for each gt (Riana)

Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
---
 tests/i915/i915_power.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/tests/i915/i915_power.c b/tests/i915/i915_power.c
index f2fd228698a..abf458573ef 100644
--- a/tests/i915/i915_power.c
+++ b/tests/i915/i915_power.c
@@ -5,6 +5,7 @@
 
 #include "igt.h"
 #include "i915/gem.h"
+#include "igt_sysfs.h"
 #include "igt_power.h"
 
 IGT_TEST_DESCRIPTION("i915 power measurement tests");
@@ -27,6 +28,7 @@ static void sanity(int i915)
 	double idle, busy;
 	igt_spin_t *spin;
 	uint64_t ahnd;
+	int dir, gt, req, act;
 
 #define DURATION_SEC 2
 
@@ -34,6 +36,7 @@ static void sanity(int i915)
 	igt_require(!igt_power_open(i915, &pwr, "gpu"));
 	gem_quiescent_gpu(i915);
 	idle = measure_power(&pwr, DURATION_SEC);
+	igt_info("Measured idle power: %g mW\n", idle);
 
 	/* Busy power */
 	ctx = intel_ctx_create_all_physical(i915);
@@ -44,12 +47,17 @@ static void sanity(int i915)
 	/* Wait till at least one spinner starts */
 	igt_spin_busywait_until_started(spin);
 	busy = measure_power(&pwr, DURATION_SEC);
+	i915_for_each_gt(i915, gt, dir) {
+		req = igt_sysfs_get_u32(dir, "rps_cur_freq_mhz");
+		act = igt_sysfs_get_u32(dir, "rps_act_freq_mhz");
+		igt_info("gt %d: req MHz: %d, act MHz: %d\n", gt, req, act);
+	}
 	igt_free_spins(i915);
 	put_ahnd(ahnd);
 	intel_ctx_destroy(i915, ctx);
 	igt_power_close(&pwr);
 
-	igt_info("Measured power: idle: %g mW, busy: %g mW\n", idle, busy);
+	igt_info("Measured busy power: %g mW\n", busy);
 	igt_assert(idle >= 0 && busy > 0 && busy > idle);
 }
 
-- 
2.38.0