From: Vikas Srivastava <vikas.srivastava@intel.com>
To: igt-dev@lists.freedesktop.org, karolina.stolarek@intel.com
Subject: [igt-dev] [PATCH i-g-t 4/4 v3] tests/i915/gem_userptr_blits: Enable XY_FAST_COPY_BLT command for gen12+
Date: Tue, 4 Apr 2023 12:24:29 +0530 [thread overview]
Message-ID: <20230404065429.3381075-5-vikas.srivastava@intel.com> (raw)
In-Reply-To: <20230404065429.3381075-1-vikas.srivastava@intel.com>
Test case uses legacy command XY_SRC_COPY_BLT_CMD which is
not supported on newer platforms. Modify test
to use XY_FAST_COPY_BLT.
Signed-off-by: Vikas Srivastava <vikas.srivastava@intel.com>
Cc: Karolina Stolarek <karolina.stolarek@intel.com>
---
tests/i915/gem_userptr_blits.c | 102 ++++++++++++++++++++-------------
1 file changed, 63 insertions(+), 39 deletions(-)
diff --git a/tests/i915/gem_userptr_blits.c b/tests/i915/gem_userptr_blits.c
index 07a453229a..3a1a81e456 100644
--- a/tests/i915/gem_userptr_blits.c
+++ b/tests/i915/gem_userptr_blits.c
@@ -66,6 +66,7 @@
#include "sw_sync.h"
#include "eviction_common.c"
+#include "i915/i915_blt.h"
#ifndef PAGE_SIZE
#define PAGE_SIZE 4096
@@ -99,6 +100,7 @@ static int copy(int fd, uint32_t dst, uint32_t src)
struct drm_i915_gem_relocation_entry reloc[2];
struct drm_i915_gem_exec_object2 obj[3];
struct drm_i915_gem_execbuffer2 exec;
+ static uint32_t devid;
uint32_t handle;
int ret, i=0;
uint64_t dst_offset, src_offset, bb_offset;
@@ -108,29 +110,49 @@ static int copy(int fd, uint32_t dst, uint32_t src)
dst_offset = bb_offset + 4096;
src_offset = dst_offset + WIDTH * HEIGHT * sizeof(uint32_t) * (src != dst);
- batch[i++] = XY_SRC_COPY_BLT_CMD |
- XY_SRC_COPY_BLT_WRITE_ALPHA |
- XY_SRC_COPY_BLT_WRITE_RGB;
- if (intel_gen(intel_get_drm_devid(fd)) >= 8)
- batch[i - 1] |= 8;
- else
- batch[i - 1] |= 6;
-
- batch[i++] = (3 << 24) | /* 32 bits */
- (0xcc << 16) | /* copy ROP */
- WIDTH*4;
- batch[i++] = 0; /* dst x1,y1 */
- batch[i++] = (HEIGHT << 16) | WIDTH; /* dst x2,y2 */
- batch[i++] = dst_offset; /* dst reloc */
- if (intel_gen(intel_get_drm_devid(fd)) >= 8)
- batch[i++] = dst_offset >> 32;
- batch[i++] = 0; /* src x1,y1 */
- batch[i++] = WIDTH*4;
- batch[i++] = src_offset; /* src reloc */
- if (intel_gen(intel_get_drm_devid(fd)) >= 8)
- batch[i++] = src_offset >> 32;
- batch[i++] = MI_BATCH_BUFFER_END;
- batch[i++] = MI_NOOP;
+ devid = intel_get_drm_devid(fd);
+
+ if (blt_has_xy_src_copy(fd)) {
+ batch[i++] = XY_SRC_COPY_BLT_CMD |
+ XY_SRC_COPY_BLT_WRITE_ALPHA |
+ XY_SRC_COPY_BLT_WRITE_RGB;
+
+ if (intel_gen(devid) >= 8)
+ batch[i - 1] |= 8;
+ else
+ batch[i - 1] |= 6;
+
+ batch[i++] = (3 << 24) | /* 32 bits */
+ (0xcc << 16) | /* copy ROP */
+ WIDTH * 4;
+ batch[i++] = 0; /* dst x1,y1 */
+ batch[i++] = (HEIGHT << 16) | WIDTH; /* dst x2,y2 */
+ batch[i++] = lower_32_bits(dst_offset); /* dst reloc*/
+ if (intel_gen(devid) >= 8)
+ batch[i++] = upper_32_bits(CANONICAL(dst_offset));
+ batch[i++] = 0; /* src x1,y1 */
+ batch[i++] = WIDTH * 4;
+ batch[i++] = lower_32_bits(src_offset); /* src reloc */
+ if (intel_gen(devid) >= 8)
+ batch[i++] = upper_32_bits(CANONICAL(src_offset));
+ batch[i++] = MI_BATCH_BUFFER_END;
+ batch[i++] = MI_NOOP;
+ } else if (blt_has_fast_copy(fd)) {
+ batch[i++] = XY_FAST_COPY_BLT;
+ batch[i++] = XY_FAST_COPY_COLOR_DEPTH_32 | WIDTH * 4;
+ batch[i++] = 0;/* dst x1,y1 */
+ batch[i++] = (HEIGHT << 16) | WIDTH;/* dst x2,y2 */
+ batch[i++] = lower_32_bits(dst_offset); /* dst address */
+ batch[i++] = upper_32_bits(CANONICAL(dst_offset));
+ batch[i++] = 0;/* src x1,y1 */
+ batch[i++] = WIDTH * 4;/* src pitch */
+ batch[i++] = lower_32_bits(src_offset); /* src address */
+ batch[i++] = upper_32_bits(CANONICAL(src_offset));
+ batch[i++] = MI_BATCH_BUFFER_END;
+ batch[i++] = MI_NOOP;
+ } else {
+ igt_assert_f(0, "No supported blit command found\n");
+ }
handle = gem_create(fd, 4096);
gem_write(fd, handle, 0, batch, sizeof(batch));
@@ -254,20 +276,7 @@ blit(int fd, uint32_t dst, uint32_t src, uint32_t *all_bo, int n_bo)
reloc[1].read_domains = I915_GEM_DOMAIN_RENDER;
reloc[1].write_domain = 0;
- if (intel_graphics_ver(devid) >= IP_VER(12, 60)) {
- batch[i++] = XY_FAST_COPY_BLT;
- batch[i++] = XY_FAST_COPY_COLOR_DEPTH_32 | WIDTH*4;
- batch[i++] = 0; /* dst x1,y1 */
- batch[i++] = (HEIGHT << 16) | WIDTH; /* dst x2,y2 */
- batch[i++] = lower_32_bits(dst_offset); /* dst address */
- batch[i++] = upper_32_bits(CANONICAL(dst_offset));
- batch[i++] = 0; /* src x1,y1 */
- batch[i++] = WIDTH*4; /* src pitch */
- batch[i++] = lower_32_bits(src_offset); /* src address */
- batch[i++] = upper_32_bits(CANONICAL(src_offset));
- batch[i++] = MI_BATCH_BUFFER_END;
- batch[i++] = MI_NOOP;
- } else {
+ if (blt_has_xy_src_copy(fd)) {
batch[i++] = XY_SRC_COPY_BLT_CMD |
XY_SRC_COPY_BLT_WRITE_ALPHA |
XY_SRC_COPY_BLT_WRITE_RGB;
@@ -277,19 +286,34 @@ blit(int fd, uint32_t dst, uint32_t src, uint32_t *all_bo, int n_bo)
batch[i - 1] |= 6;
batch[i++] = (3 << 24) | /* 32 bits */
(0xcc << 16) | /* copy ROP */
- WIDTH*4;
+ WIDTH * 4;
batch[i++] = 0; /* dst x1,y1 */
batch[i++] = (HEIGHT << 16) | WIDTH; /* dst x2,y2 */
batch[i++] = lower_32_bits(dst_offset);
if (intel_gen(devid) >= 8)
batch[i++] = upper_32_bits(CANONICAL(dst_offset));
batch[i++] = 0; /* src x1,y1 */
- batch[i++] = WIDTH*4;
+ batch[i++] = WIDTH * 4;
batch[i++] = lower_32_bits(src_offset);
if (intel_gen(devid) >= 8)
batch[i++] = upper_32_bits(CANONICAL(src_offset));
batch[i++] = MI_BATCH_BUFFER_END;
batch[i++] = MI_NOOP;
+ } else if (blt_has_fast_copy(fd)) {
+ batch[i++] = XY_FAST_COPY_BLT;
+ batch[i++] = XY_FAST_COPY_COLOR_DEPTH_32 | WIDTH * 4;
+ batch[i++] = 0; /* dst x1,y1 */
+ batch[i++] = (HEIGHT << 16) | WIDTH; /* dst x2,y2 */
+ batch[i++] = lower_32_bits(dst_offset); /* dst address */
+ batch[i++] = upper_32_bits(CANONICAL(dst_offset));
+ batch[i++] = 0; /* src x1,y1 */
+ batch[i++] = WIDTH * 4; /* src pitch */
+ batch[i++] = lower_32_bits(src_offset); /* src address */
+ batch[i++] = upper_32_bits(CANONICAL(src_offset));
+ batch[i++] = MI_BATCH_BUFFER_END;
+ batch[i++] = MI_NOOP;
+ } else {
+ igt_assert_f(0, "No supported blit command found\n");
}
gem_write(fd, handle, 0, batch, sizeof(batch));
--
2.25.1
next prev parent reply other threads:[~2023-04-04 6:57 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-04 6:54 [igt-dev] [PATCH i-g-t 0/4] tests/i915: Enable XY_FAST_COPY_BLT for gen12+ Vikas Srivastava
2023-04-04 6:54 ` [igt-dev] [PATCH i-g-t 1/4 v3] tests/i915/gem_linear_blits: Enable XY_FAST_COPY_BLT copy instruction Vikas Srivastava
2023-04-04 6:54 ` [igt-dev] [PATCH i-g-t 2/4 v3] tests/i915/gem_caching: Enable XY_FAST_COPY_BLT for MTL Vikas Srivastava
2023-04-04 6:54 ` [igt-dev] [PATCH i-g-t 3/4 v3] lib/intel_batchbuffer: Enable XY_FAST_COPY_BLT support for api_intel_bb Vikas Srivastava
2023-04-04 6:54 ` Vikas Srivastava [this message]
2023-04-04 9:44 ` [igt-dev] ✓ Fi.CI.BAT: success for tests/i915: Enable XY_FAST_COPY_BLT for gen12+ Patchwork
2023-04-04 12:02 ` [igt-dev] [PATCH i-g-t 0/4] " Karolina Stolarek
2023-04-04 15:20 ` [igt-dev] ✓ Fi.CI.IGT: success for " Patchwork
-- strict thread matches above, loose matches on Subject: below --
2023-04-05 6:07 [igt-dev] [PATCH i-g-t 0/4] " Vikas Srivastava
2023-04-05 6:07 ` [igt-dev] [PATCH i-g-t 4/4 v3] tests/i915/gem_userptr_blits: Enable XY_FAST_COPY_BLT command " Vikas Srivastava
2023-04-03 10:57 [igt-dev] [PATCH i-g-t 0/4] tests/i915: Enable XY_FAST_COPY_BLT " Vikas Srivastava
2023-04-03 10:57 ` [igt-dev] [PATCH i-g-t 4/4 v3] tests/i915/gem_userptr_blits: Enable XY_FAST_COPY_BLT command " Vikas Srivastava
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230404065429.3381075-5-vikas.srivastava@intel.com \
--to=vikas.srivastava@intel.com \
--cc=igt-dev@lists.freedesktop.org \
--cc=karolina.stolarek@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox