[igt-dev] [PATCH i-g-t 4/4] tests/kms_async_flips: Test all modifiers

[Arun R Murthy <arun.r.murthy@intel.com>]

Run the basic async flip test for all modifiers reported
by the plane (for the XRGB8888 format). The driver may not
support async flip with all modifiers so we allow this to fail.

TODO: probably shuould add an even more basic subtest that
      makes sure the driver accepts async flips with a least
      one format/modifier combo, if it advertises async flip
      support

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
---
 tests/kms_async_flips.c | 53 +++++++++++++++++++++++++++++++++--------
 1 file changed, 43 insertions(+), 10 deletions(-)

diff --git a/tests/kms_async_flips.c b/tests/kms_async_flips.c
index f54bd7ca..3b8cb988 100644
--- a/tests/kms_async_flips.c
+++ b/tests/kms_async_flips.c
@@ -53,6 +53,8 @@ typedef struct {
 	igt_output_t *output;
 	unsigned long flip_timestamp_us;
 	double flip_interval;
+	uint64_t modifier;
+	igt_plane_t *plane;
 	igt_pipe_crc_t *pipe_crc;
 	igt_crc_t ref_crc;
 	int flip_count;
@@ -61,6 +63,7 @@ typedef struct {
 	bool extended;
 	enum pipe pipe;
 	bool alternate_sync_async;
+	bool allow_fail;
 } data_t;
 
 static void flip_handler(int fd_, unsigned int sequence, unsigned int tv_sec,
@@ -133,7 +136,7 @@ static void make_fb(data_t *data, struct igt_fb *fb,
 	rec_width = width / (ARRAY_SIZE(data->bufs) * 2);
 
 	igt_create_color_fb(data->drm_fd, width, height, DRM_FORMAT_XRGB8888,
-			    default_modifier(data), 0.0, 0.0, 0.5, fb);
+			    data->modifier, 0.0, 0.0, 0.5, fb);
 
 	cr = igt_get_cairo_ctx(data->drm_fd, fb);
 	igt_paint_color_rand(cr, rec_width * 2 + rec_width * index, 0, rec_width, height);
@@ -159,24 +162,26 @@ static void test_init(data_t *data)
 	data->refresh_rate = mode->vrefresh;
 
 	igt_output_set_pipe(data->output, data->pipe);
+
+	data->plane = igt_output_get_plane_type(data->output, DRM_PLANE_TYPE_PRIMARY);
 }
 
 static void test_init_fbs(data_t *data)
 {
 	int i;
 	uint32_t width, height;
-	igt_plane_t *plane;
 	static uint32_t prev_output_id;
+	static uint64_t prev_modifier;
 	drmModeModeInfo *mode;
 
 	mode = igt_output_get_mode(data->output);
 	width = mode->hdisplay;
 	height = mode->vdisplay;
 
-	plane = igt_output_get_plane_type(data->output, DRM_PLANE_TYPE_PRIMARY);
-
-	if (prev_output_id != data->output->id) {
+	if (prev_output_id != data->output->id ||
+	    prev_modifier != data->modifier) {
 		prev_output_id = data->output->id;
+		prev_modifier = data->modifier;
 
 		if (data->bufs[0].fb_id) {
 			for (i = 0; i < ARRAY_SIZE(data->bufs); i++)
@@ -187,8 +192,8 @@ static void test_init_fbs(data_t *data)
 			make_fb(data, &data->bufs[i], width, height, i);
 	}
 
-	igt_plane_set_fb(plane, &data->bufs[0]);
-	igt_plane_set_size(plane, width, height);
+	igt_plane_set_fb(data->plane, &data->bufs[0]);
+	igt_plane_set_size(data->plane, width, height);
 
 	igt_display_commit2(&data->display, data->display.is_atomic ? COMMIT_ATOMIC : COMMIT_LEGACY);
 }
@@ -243,8 +248,10 @@ static void test_async_flip(data_t *data)
 		ret = drmModePageFlip(data->drm_fd, data->crtc_id,
 				      data->bufs[frame % 4].fb_id,
 				      flags, data);
-
-		igt_assert(ret == 0);
+		if (frame == 1 && data->allow_fail)
+			igt_skip_on(ret == -EINVAL);
+		else
+			igt_assert(ret == 0);
 
 		wait_flip_event(data);
 
@@ -556,6 +563,8 @@ static void run_test(data_t *data, void (*test)(data_t *))
 			continue;
 
 		test_init(data);
+		data->allow_fail = false;
+		data->modifier = default_modifier(data);
 		igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(data->pipe), data->output->name) {
 			test_init_fbs(data);
 			test(data);
@@ -566,6 +575,30 @@ static void run_test(data_t *data, void (*test)(data_t *))
 	}
 }
 
+static void run_test_with_modifiers(data_t *data, void (*test)(data_t *))
+{
+	for_each_pipe_with_valid_output(&data->display, data->pipe, data->output) {
+		test_init(data);
+
+		for (int i = 0; i < data->plane->format_mod_count; i++) {
+			if (data->plane->formats[i] != DRM_FORMAT_XRGB8888)
+				continue;
+
+			data->allow_fail = true;
+			data->modifier = data->plane->modifiers[i];
+
+			igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(data->pipe),
+				      igt_fb_modifier_name(data->modifier)) {
+				test_init_fbs(data);
+				test(data);
+			}
+		}
+
+		if (!data->extended)
+			break;
+	}
+}
+
 static int opt_handler(int opt, int opt_index, void *_data)
 {
 	data_t *data = _data;
@@ -612,7 +645,7 @@ igt_main_args("e", NULL, help_str, opt_handler, &data)
 		igt_describe("Wait for page flip events in between successive asynchronous flips");
 		igt_subtest_with_dynamic("async-flip-with-page-flip-events") {
 			data.alternate_sync_async = false;
-			run_test(&data, test_async_flip);
+			run_test_with_modifiers(&data, test_async_flip);
 		}
 
 		igt_describe("Alternate between sync and async flips");
-- 
2.25.1