From: Swati Sharma <swati2.sharma@intel.com>
To: igt-dev@lists.freedesktop.org
Subject: [igt-dev] [PATCH i-g-t 2/3] tests/kms_pipe_crc_basic: add nv12 crc sanity check
Date: Fri, 26 May 2023 23:13:04 +0530 [thread overview]
Message-ID: <20230526174305.319725-2-swati2.sharma@intel.com> (raw)
In-Reply-To: <20230526174305.319725-1-swati2.sharma@intel.com>
New CRC sanitycheck test case is added with NV12 format.
kms_plane@pixel-format test is validating all formats.
To improve BAT coverage we can have one planar format crc
sanity test.
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Jeevan B <jeevan.b@intel.com>
---
tests/kms_pipe_crc_basic.c | 49 +++++++++++++++++++++++++++-----------
1 file changed, 35 insertions(+), 14 deletions(-)
diff --git a/tests/kms_pipe_crc_basic.c b/tests/kms_pipe_crc_basic.c
index 84c73fd7..a280a5c2 100644
--- a/tests/kms_pipe_crc_basic.c
+++ b/tests/kms_pipe_crc_basic.c
@@ -227,25 +227,34 @@ static void test_read_crc(data_t *data, enum pipe pipe,
}
/**
- * SUBTEST: compare-crc-sanitycheck
- * Description: Basic sanity check for CRC mismatches
+ * SUBTEST: compare-crc-sanitycheck-xr24
+ * Description: Basic sanity check for CRC mismatches with XR24 format
* Test category: functionality test
* Run type: BAT
* Functionality: crc
* Mega feature: General Display Features
+ *
+ * SUBTEST: compare-crc-sanitycheck-nv12
+ * Description: Basic sanity check for CRC mismatches with NV12 format
+ * Test category: functionality test
+ * Run type: BAT
+ * Functionality: crc
+ * Mega feature: General Display Features
+
*/
/*
* CRC-sanity test, to make sure there would be no CRC mismatches
*
- * - Create two framebuffers (FB0 & FB1) with same color info
- * - Flip FB0 with the Primary plane & collect the CRC as ref CRC.
- * - Flip FB1 with the Primary plane, collect the CRC & compare with
+ * - Create two framebuffers (FB0 & FB1)
+ * - Flip FB0 with the primary plane & collect the CRC as ref CRC.
+ * - Flip FB1 with the primary plane, collect the CRC & compare with
* the ref CRC.
*
* No CRC mismatch should happen
*/
-static void test_compare_crc(data_t *data, enum pipe pipe, igt_output_t *output)
+static void test_compare_crc(data_t *data, enum pipe pipe, igt_output_t *output,
+ uint32_t format)
{
igt_display_t *display = &data->display;
igt_plane_t *primary;
@@ -259,7 +268,6 @@ static void test_compare_crc(data_t *data, enum pipe pipe, igt_output_t *output)
mode = igt_output_get_mode(output);
- /* Create two framebuffers with the same color info. */
igt_create_color_fb(data->drm_fd,
mode->hdisplay, mode->vdisplay,
DRM_FORMAT_XRGB8888,
@@ -267,13 +275,12 @@ static void test_compare_crc(data_t *data, enum pipe pipe, igt_output_t *output)
1.0, 1.0, 1.0,
&fb0);
igt_create_color_fb(data->drm_fd,
- mode->hdisplay, mode->vdisplay,
- DRM_FORMAT_XRGB8888,
+ mode->hdisplay, mode->vdisplay, format,
DRM_FORMAT_MOD_LINEAR,
1.0, 1.0, 1.0,
&fb1);
- /* Flip FB0 with the Primary plane & collect the CRC as ref CRC. */
+ /* Flip FB0 with the primary plane & collect the CRC as ref CRC. */
primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
igt_plane_set_fb(primary, &fb0);
igt_display_commit(display);
@@ -282,7 +289,7 @@ static void test_compare_crc(data_t *data, enum pipe pipe, igt_output_t *output)
IGT_PIPE_CRC_SOURCE_AUTO);
igt_pipe_crc_collect_crc(pipe_crc, &ref_crc);
- /* Flip FB1 with the Primary plane & compare the CRC with ref CRC. */
+ /* Flip FB1 with the primary plane & compare the CRC with ref CRC. */
igt_plane_set_fb(primary, &fb1);
igt_display_commit(display);
@@ -475,8 +482,22 @@ igt_main_args("e", NULL, help_str, opt_handler, NULL)
}
}
- igt_describe("Basic sanity check for CRC mismatches");
- igt_subtest_with_dynamic("compare-crc-sanitycheck") {
+ igt_describe("Basic sanity check for CRC mismatches with XR24 format");
+ igt_subtest_with_dynamic("compare-crc-sanitycheck-xr24") {
+ for_each_pipe_with_single_output(&data.display, pipe, output) {
+ if (simulation_constraint(pipe))
+ continue;
+
+ if(!pipe_output_combo_valid(&data.display, pipe, output))
+ continue;
+
+ igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipe), output->name)
+ test_compare_crc(&data, pipe, output, DRM_FORMAT_XRGB8888);
+ }
+ }
+
+ igt_describe("Basic sanity check for CRC mismatches with NV12 format");
+ igt_subtest_with_dynamic("compare-crc-sanitycheck-nv12") {
for_each_pipe_with_single_output(&data.display, pipe, output) {
if (simulation_constraint(pipe))
continue;
@@ -485,7 +506,7 @@ igt_main_args("e", NULL, help_str, opt_handler, NULL)
continue;
igt_dynamic_f("pipe-%s-%s", kmstest_pipe_name(pipe), output->name)
- test_compare_crc(&data, pipe, output);
+ test_compare_crc(&data, pipe, output, DRM_FORMAT_NV12);
}
}
--
2.25.1
next prev parent reply other threads:[~2023-05-26 17:43 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-26 17:43 [igt-dev] [PATCH i-g-t 1/3] lib/igt_fb: round rgb->yuv conversion results Swati Sharma
2023-05-26 17:43 ` Swati Sharma [this message]
2023-05-29 5:52 ` [igt-dev] [PATCH i-g-t 2/3] tests/kms_pipe_crc_basic: add nv12 crc sanity check Modem, Bhanuprakash
2023-05-26 17:43 ` [igt-dev] [PATCH i-g-t 3/3] intel-ci: update fastfeedback testlist Swati Sharma
2023-05-29 5:55 ` Modem, Bhanuprakash
2023-05-26 18:17 ` [igt-dev] ✗ Fi.CI.BUILD: failure for series starting with [i-g-t,1/3] lib/igt_fb: round rgb->yuv conversion results Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230526174305.319725-2-swati2.sharma@intel.com \
--to=swati2.sharma@intel.com \
--cc=igt-dev@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox