From: Anna Karas <anna.karas@intel.com>
To: igt-dev@lists.freedesktop.org
Cc: Sai Gowtham Ch <sai.gowtham.ch@intel.com>,
Chris Wilson <chris.p.wilson@linux.intel.com>
Subject: [igt-dev] [PATCH i-g-t] tests/xe: Add xe_module_error test
Date: Wed, 31 May 2023 15:49:50 +0200 [thread overview]
Message-ID: <20230531134950.483688-1-anna.karas@intel.com> (raw)
Port i915_module_error test to XE. This test checks if we can access
debugfs/sysfs after a module load error, in this case a guc load error,
for capturing the requisite debug info.
Signed-off-by: Anna Karas <anna.karas@intel.com>
---
tests/meson.build | 1 +
tests/xe/xe_module_error.c | 145 +++++++++++++++++++++++++++++++++++++
2 files changed, 146 insertions(+)
create mode 100644 tests/xe/xe_module_error.c
diff --git a/tests/meson.build b/tests/meson.build
index f71be1db..533c96e8 100644
--- a/tests/meson.build
+++ b/tests/meson.build
@@ -261,6 +261,7 @@ xe_progs = [
'xe_intel_bb',
'xe_mmap',
'xe_mmio',
+ 'xe_module_error',
'xe_module_load',
'xe_noexec_ping_pong',
'xe_pm',
diff --git a/tests/xe/xe_module_error.c b/tests/xe/xe_module_error.c
new file mode 100644
index 00000000..a17d85ca
--- /dev/null
+++ b/tests/xe/xe_module_error.c
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright © 2023 Intel Corporation
+ */
+
+#include <dirent.h>
+
+#include "igt.h"
+#include "igt_kmod.h"
+#include "igt_debugfs.h"
+#include "igt_sysfs.h"
+#include "xe_drm.h"
+
+#include "xe/xe_spin.h"
+
+/**
+ * TEST: Check if we can access sysfs/debugfs after a module load error
+ * Category: Software building block
+ * Sub-category: debugfs
+ * Test category: functionality test
+ * Run type: BAT
+ */
+
+/**
+ * SUBTEST: sysfs
+ * Description: Read all entries from sysfs path
+ * Run type: FULL
+ */
+
+/**
+ * SUBTEST: debugfs
+ * Description: Read all entries from debugfs path
+ * Run type: FULL
+ */
+static void read_sysfs_entries(int path, int indent)
+{
+ char tabs[] = "\t\t\t\t\t\t\t\t";
+ struct dirent *dirent;
+ DIR *dir;
+
+ igt_assert(indent < sizeof(tabs) - 1);
+ tabs[indent] = '\0';
+
+ dir = fdopendir(path);
+ if (!dir)
+ return;
+
+ while ((dirent = readdir(dir))) {
+ if (!strcmp(dirent->d_name, ".") ||
+ !strcmp(dirent->d_name, ".."))
+ continue;
+
+ if (dirent->d_type == DT_DIR) {
+ int sub;
+
+ sub = openat(path, dirent->d_name, O_RDONLY | O_DIRECTORY);
+ if (sub < 0)
+ continue;
+
+ igt_kmsg(KMSG_DEBUG "Reading directory \"%s\"\n", dirent->d_name);
+ igt_debug("%sEntering subdir %s\n", tabs, dirent->d_name);
+ read_sysfs_entries(sub, indent + 1);
+ close(sub);
+ } else if (dirent->d_type == DT_REG) {
+ char buf[512];
+ int sub;
+ ssize_t ret;
+
+ igt_kmsg(KMSG_DEBUG "Reading file \"%s\"\n", dirent->d_name);
+ igt_debug("%sReading file \"%s\"\n", tabs, dirent->d_name);
+ igt_set_timeout(igt_run_in_simulation() ? 30 : 5,
+ "reading sysfs entry");
+
+ sub = openat(path, dirent->d_name, O_RDONLY | O_NONBLOCK);
+ if (sub == -1) {
+ igt_debug("%sCould not open file \"%s\" with error: %m\n",
+ tabs, dirent->d_name);
+ continue;
+ }
+
+ do {
+ ret = read(sub, buf, sizeof(buf));
+ } while (ret == sizeof(buf));
+
+ if (ret == -1)
+ igt_debug("%sCould not read file \"%s\" with error: %m\n",
+ tabs, dirent->d_name);
+
+ igt_reset_timeout();
+ close(sub);
+ }
+ }
+
+ closedir(dir);
+}
+
+static void abort_if_loaded(const char *module_name)
+{
+ int err;
+
+ err = igt_kmod_unload(module_name, 0);
+ if (err == 0 || err == -ENOENT) /* -ENOENT == unloaded already */
+ return;
+
+ igt_abort_on_f(err,
+ "Failed to unload '%s' err:%d, leaving dangerous modparams intact!\n",
+ module_name, err);
+}
+
+static void unload(int sig)
+{
+ igt_xe_driver_unload();
+ abort_if_loaded("xe");
+}
+
+igt_main
+{
+ int fd;
+
+ igt_fixture {
+ igt_xe_driver_unload();
+ igt_xe_driver_load("guc_firmware_path=/dev/null inject_probe_failure=-1 force_probe=*");
+ igt_install_exit_handler(unload);
+
+ fd = drm_open_driver(DRIVER_XE);
+ xe_device_get(fd);
+ }
+
+ igt_subtest("sysfs") {
+ igt_fork(child, 1)
+ read_sysfs_entries(igt_sysfs_open(fd), 0);
+ igt_waitchildren();
+ }
+
+ igt_subtest("debugfs") {
+ igt_fork(child, 1)
+ read_sysfs_entries(igt_debugfs_dir(fd), 0);
+ igt_waitchildren();
+ }
+
+ igt_fixture {
+ xe_device_put(fd);
+ close(fd);
+ }
+}
--
2.25.1
next reply other threads:[~2023-05-31 13:51 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-31 13:49 Anna Karas [this message]
2023-05-31 14:25 ` [igt-dev] [PATCH i-g-t] tests/xe: Add xe_module_error test Manszewski, Christoph
2023-06-01 7:53 ` Karas, Anna
2023-06-01 8:03 ` Ch, Sai Gowtham
2023-06-01 11:03 ` Kumar, Janga Rahul
2023-05-31 15:02 ` [igt-dev] ✓ Fi.CI.BAT: success for " Patchwork
2023-06-02 1:17 ` [igt-dev] ✗ Fi.CI.IGT: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230531134950.483688-1-anna.karas@intel.com \
--to=anna.karas@intel.com \
--cc=chris.p.wilson@linux.intel.com \
--cc=igt-dev@lists.freedesktop.org \
--cc=sai.gowtham.ch@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox