From: Mauro Carvalho Chehab <mauro.chehab@linux.intel.com>
To: igt-dev@lists.freedesktop.org
Cc: tomasz.mistat@intel.com, jari.tahvanainen@intel.com
Subject: [igt-dev] [RFC v2 0/5] Xe: set Run type from testlist instead of defining it
Date: Wed, 6 Sep 2023 11:05:39 +0200 [thread overview]
Message-ID: <20230906090819.226410-1-mauro.chehab@linux.intel.com> (raw)
From: Mauro Carvalho Chehab <mchehab@kernel.org>
Right now, we're keeping testlists both at documentation and on
separate testlist files. That makes harder to maintain. It also
requires splitting wildcards on multiple fields just due to that.
In the end, only the testlist files are updated.
So, simplify the maintainance by reading the testlists and parsing
them directly.
This will also handle tests that are blacklisted for all platforms.
---
v2:
- Rebased to avoid a merge conflict;
- Added KMS tests;
- Better handle blocklists;
- BAT renamed to Xe BAT or i915 BAT, due to KMS test/block lists.
Mauro Carvalho Chehab (5):
test_list.py: add support for reading testlist regular expressions
xe_test_config.json: add testlists and blacklists
kms_test_config.json: add testlists and blacklists
tests: Intel Xe: drop Run type field
tests: Intel KMS: drop Run type field
scripts/test_list.py | 75 +++++++++
tests/chamelium/kms_chamelium_audio.c | 4 -
tests/chamelium/kms_chamelium_color.c | 3 -
tests/chamelium/kms_chamelium_edid.c | 10 --
tests/chamelium/kms_chamelium_frames.c | 10 --
tests/chamelium/kms_chamelium_hpd.c | 25 ---
tests/intel/kms_big_fb.c | 12 --
tests/intel/kms_big_joiner.c | 3 -
tests/intel/kms_busy.c | 5 -
tests/intel/kms_ccs.c | 3 -
tests/intel/kms_cdclk.c | 3 -
tests/intel/kms_draw_crc.c | 3 -
tests/intel/kms_dsc.c | 1 -
tests/intel/kms_fb_coherency.c | 1 -
tests/intel/kms_fbcon_fbt.c | 4 -
tests/intel/kms_fence_pin_leak.c | 1 -
tests/intel/kms_flip_scaled_crc.c | 19 ---
tests/intel/kms_flip_tiling.c | 1 -
tests/intel/kms_frontbuffer_tracking.c | 206 -------------------------
tests/intel/kms_legacy_colorkey.c | 2 -
tests/intel/kms_mmap_write_crc.c | 1 -
tests/intel/kms_pipe_b_c_ivb.c | 5 -
tests/intel/kms_psr.c | 19 ---
tests/intel/kms_psr2_sf.c | 8 -
tests/intel/kms_psr2_su.c | 2 -
tests/intel/kms_psr_stress_test.c | 2 -
tests/intel/kms_pwrite_crc.c | 1 -
tests/intel/kms_test_config.json | 14 +-
tests/intel/xe_ccs.c | 1 -
tests/intel/xe_compute.c | 1 -
tests/intel/xe_create.c | 2 -
tests/intel/xe_debugfs.c | 1 -
tests/intel/xe_dma_buf_sync.c | 4 -
tests/intel/xe_evict.c | 1 -
tests/intel/xe_exec_balancer.c | 11 --
tests/intel/xe_exec_basic.c | 6 -
tests/intel/xe_exec_compute_mode.c | 4 -
tests/intel/xe_exec_fault_mode.c | 8 -
tests/intel/xe_exec_reset.c | 23 ---
tests/intel/xe_exec_store.c | 2 -
tests/intel/xe_exec_threads.c | 2 -
tests/intel/xe_exercise_blt.c | 1 -
tests/intel/xe_gpgpu_fill.c | 1 -
tests/intel/xe_guc_pc.c | 9 --
tests/intel/xe_huc_copy.c | 1 -
tests/intel/xe_intel_bb.c | 13 --
tests/intel/xe_live_ktest.c | 1 -
tests/intel/xe_media_fill.c | 1 -
tests/intel/xe_mmap.c | 1 -
tests/intel/xe_mmio.c | 1 -
tests/intel/xe_module_load.c | 6 -
tests/intel/xe_noexec_ping_pong.c | 1 -
tests/intel/xe_pm.c | 2 -
tests/intel/xe_pm_residency.c | 4 -
tests/intel/xe_prime_self_import.c | 8 -
tests/intel/xe_query.c | 1 -
tests/intel/xe_spin_batch.c | 4 -
tests/intel/xe_sysfs_defaults.c | 1 -
tests/intel/xe_sysfs_scheduler.c | 1 -
tests/intel/xe_test_config.json | 6 +
tests/intel/xe_vm.c | 23 ---
tests/intel/xe_waitfence.c | 1 -
tests/kms_3d.c | 1 -
tests/kms_addfb_basic.c | 27 ----
tests/kms_async_flips.c | 6 -
tests/kms_atomic.c | 8 -
tests/kms_atomic_interruptible.c | 5 -
tests/kms_atomic_transition.c | 7 -
tests/kms_bw.c | 1 -
tests/kms_color.c | 7 -
tests/kms_concurrent.c | 1 -
tests/kms_content_protection.c | 7 -
tests/kms_cursor_crc.c | 4 -
tests/kms_cursor_edge_walk.c | 1 -
tests/kms_cursor_legacy.c | 16 --
tests/kms_display_modes.c | 2 -
tests/kms_dither.c | 2 -
tests/kms_dp_aux_dev.c | 1 -
tests/kms_flip.c | 26 ----
tests/kms_flip_event_leak.c | 1 -
tests/kms_force_connector_basic.c | 4 -
tests/kms_getfb.c | 7 -
tests/kms_hdmi_inject.c | 2 -
tests/kms_hdr.c | 8 -
tests/kms_invalid_mode.c | 1 -
tests/kms_lease.c | 21 ---
tests/kms_multipipe_modeset.c | 1 -
tests/kms_panel_fitting.c | 2 -
tests/kms_pipe_crc_basic.c | 9 --
tests/kms_plane.c | 6 -
tests/kms_plane_alpha_blend.c | 4 -
tests/kms_plane_cursor.c | 3 -
tests/kms_plane_lowres.c | 2 -
tests/kms_plane_multiple.c | 2 -
tests/kms_plane_scaling.c | 21 ---
tests/kms_prime.c | 3 -
tests/kms_prop_blob.c | 4 -
tests/kms_properties.c | 2 -
tests/kms_rmfb.c | 2 -
tests/kms_rotation_crc.c | 10 --
tests/kms_scaling_modes.c | 1 -
tests/kms_selftest.c | 1 -
tests/kms_sequence.c | 2 -
tests/kms_setmode.c | 6 -
tests/kms_sysfs_edid_timing.c | 1 -
tests/kms_tiled_display.c | 2 -
tests/kms_tv_load_detect.c | 1 -
tests/kms_universal_plane.c | 4 -
tests/kms_vblank.c | 9 --
tests/kms_vrr.c | 5 -
tests/kms_writeback.c | 4 -
tests/testdisplay.c | 1 -
112 files changed, 94 insertions(+), 776 deletions(-)
--
2.41.0
next reply other threads:[~2023-09-06 10:53 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-06 9:05 Mauro Carvalho Chehab [this message]
2023-09-06 9:05 ` [igt-dev] [RFC v2 1/5] test_list.py: add support for reading testlist regular expressions Mauro Carvalho Chehab
2023-09-06 9:05 ` [igt-dev] [RFC v2 2/5] xe_test_config.json: add testlists and blacklists Mauro Carvalho Chehab
2023-09-06 9:05 ` [igt-dev] [RFC v2 3/5] kms_test_config.json: " Mauro Carvalho Chehab
2023-09-06 9:05 ` [igt-dev] [RFC v2 4/5] tests: Intel Xe: drop Run type field Mauro Carvalho Chehab
2023-09-06 9:05 ` [igt-dev] [RFC v2 5/5] tests: Intel KMS: " Mauro Carvalho Chehab
2023-09-06 12:03 ` [igt-dev] ✓ Fi.CI.BAT: success for Xe: set Run type from testlist instead of defining it Patchwork
2023-09-06 15:58 ` [igt-dev] ✗ Fi.CI.IGT: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230906090819.226410-1-mauro.chehab@linux.intel.com \
--to=mauro.chehab@linux.intel.com \
--cc=igt-dev@lists.freedesktop.org \
--cc=jari.tahvanainen@intel.com \
--cc=tomasz.mistat@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox