From: Mauro Carvalho Chehab <mauro.chehab@linux.intel.com>
To: igt-dev@lists.freedesktop.org
Cc: tomasz.mistat@intel.com, jari.tahvanainen@intel.com
Subject: [igt-dev] [PATCH i-g-t 0/6] Subject: Xe: set Run type from testlist instead of defining it
Date: Wed, 6 Sep 2023 20:07:18 +0200 [thread overview]
Message-ID: <20230906181001.498395-1-mauro.chehab@linux.intel.com> (raw)
From: Mauro Carvalho Chehab <mchehab@kernel.org>
Right now, we're keeping testlists both at documentation and on
separate testlist files. That makes harder to maintain. It also
requires splitting wildcards on multiple fields just due to that.
In the end, only the testlist files are updated.
So, simplify the maintainance by reading the testlists and parsing
them directly.
This will also handle tests that are blacklisted for all platforms.
---
Changes since RFCv2:
- added a patch to make it by generic, moving "FULL" default value
to the config file. This would allow using the new properties
to fill other fields if needed, using different default values
(or no default).
Mauro Carvalho Chehab (6):
test_list.py: add support for reading testlist regular expressions
xe_test_config.json: add testlists and blocklists
kms_test_config.json: add testlists and blocklists
tests: Intel Xe: drop Run type field
tests: Intel KMS: drop Run type field
scripts/test_list.py: move "FULL" testlist to config file
scripts/test_list.py | 77 +++++++++
tests/chamelium/kms_chamelium_audio.c | 4 -
tests/chamelium/kms_chamelium_color.c | 3 -
tests/chamelium/kms_chamelium_edid.c | 10 --
tests/chamelium/kms_chamelium_frames.c | 10 --
tests/chamelium/kms_chamelium_hpd.c | 25 ---
tests/intel/kms_big_fb.c | 12 --
tests/intel/kms_big_joiner.c | 3 -
tests/intel/kms_busy.c | 5 -
tests/intel/kms_ccs.c | 3 -
tests/intel/kms_cdclk.c | 3 -
tests/intel/kms_draw_crc.c | 3 -
tests/intel/kms_dsc.c | 1 -
tests/intel/kms_fb_coherency.c | 1 -
tests/intel/kms_fbcon_fbt.c | 4 -
tests/intel/kms_fence_pin_leak.c | 1 -
tests/intel/kms_flip_scaled_crc.c | 19 ---
tests/intel/kms_flip_tiling.c | 1 -
tests/intel/kms_frontbuffer_tracking.c | 206 -------------------------
tests/intel/kms_legacy_colorkey.c | 2 -
tests/intel/kms_mmap_write_crc.c | 1 -
tests/intel/kms_pipe_b_c_ivb.c | 5 -
tests/intel/kms_psr.c | 19 ---
tests/intel/kms_psr2_sf.c | 8 -
tests/intel/kms_psr2_su.c | 2 -
tests/intel/kms_psr_stress_test.c | 2 -
tests/intel/kms_pwrite_crc.c | 1 -
tests/intel/kms_test_config.json | 15 +-
tests/intel/xe_ccs.c | 1 -
tests/intel/xe_compute.c | 1 -
tests/intel/xe_create.c | 2 -
tests/intel/xe_debugfs.c | 1 -
tests/intel/xe_dma_buf_sync.c | 4 -
tests/intel/xe_evict.c | 1 -
tests/intel/xe_exec_balancer.c | 11 --
tests/intel/xe_exec_basic.c | 6 -
tests/intel/xe_exec_compute_mode.c | 4 -
tests/intel/xe_exec_fault_mode.c | 8 -
tests/intel/xe_exec_reset.c | 23 ---
tests/intel/xe_exec_store.c | 2 -
tests/intel/xe_exec_threads.c | 2 -
tests/intel/xe_exercise_blt.c | 1 -
tests/intel/xe_gpgpu_fill.c | 1 -
tests/intel/xe_guc_pc.c | 9 --
tests/intel/xe_huc_copy.c | 1 -
tests/intel/xe_intel_bb.c | 13 --
tests/intel/xe_live_ktest.c | 1 -
tests/intel/xe_media_fill.c | 1 -
tests/intel/xe_mmap.c | 1 -
tests/intel/xe_mmio.c | 1 -
tests/intel/xe_module_load.c | 6 -
tests/intel/xe_noexec_ping_pong.c | 1 -
tests/intel/xe_pm.c | 2 -
tests/intel/xe_pm_residency.c | 4 -
tests/intel/xe_prime_self_import.c | 8 -
tests/intel/xe_query.c | 1 -
tests/intel/xe_spin_batch.c | 4 -
tests/intel/xe_sysfs_defaults.c | 1 -
tests/intel/xe_sysfs_scheduler.c | 1 -
tests/intel/xe_test_config.json | 7 +
tests/intel/xe_vm.c | 23 ---
tests/intel/xe_waitfence.c | 1 -
tests/kms_3d.c | 1 -
tests/kms_addfb_basic.c | 27 ----
tests/kms_async_flips.c | 6 -
tests/kms_atomic.c | 8 -
tests/kms_atomic_interruptible.c | 5 -
tests/kms_atomic_transition.c | 7 -
tests/kms_bw.c | 1 -
tests/kms_color.c | 7 -
tests/kms_concurrent.c | 1 -
tests/kms_content_protection.c | 7 -
tests/kms_cursor_crc.c | 4 -
tests/kms_cursor_edge_walk.c | 1 -
tests/kms_cursor_legacy.c | 16 --
tests/kms_display_modes.c | 2 -
tests/kms_dither.c | 2 -
tests/kms_dp_aux_dev.c | 1 -
tests/kms_flip.c | 26 ----
tests/kms_flip_event_leak.c | 1 -
tests/kms_force_connector_basic.c | 4 -
tests/kms_getfb.c | 7 -
tests/kms_hdmi_inject.c | 2 -
tests/kms_hdr.c | 8 -
tests/kms_invalid_mode.c | 1 -
tests/kms_lease.c | 21 ---
tests/kms_multipipe_modeset.c | 1 -
tests/kms_panel_fitting.c | 2 -
tests/kms_pipe_crc_basic.c | 9 --
tests/kms_plane.c | 6 -
tests/kms_plane_alpha_blend.c | 4 -
tests/kms_plane_cursor.c | 3 -
tests/kms_plane_lowres.c | 2 -
tests/kms_plane_multiple.c | 2 -
tests/kms_plane_scaling.c | 21 ---
tests/kms_prime.c | 3 -
tests/kms_prop_blob.c | 4 -
tests/kms_properties.c | 2 -
tests/kms_rmfb.c | 2 -
tests/kms_rotation_crc.c | 10 --
tests/kms_scaling_modes.c | 1 -
tests/kms_selftest.c | 1 -
tests/kms_sequence.c | 2 -
tests/kms_setmode.c | 6 -
tests/kms_sysfs_edid_timing.c | 1 -
tests/kms_tiled_display.c | 2 -
tests/kms_tv_load_detect.c | 1 -
tests/kms_universal_plane.c | 4 -
tests/kms_vblank.c | 9 --
tests/kms_vrr.c | 5 -
tests/kms_writeback.c | 4 -
tests/testdisplay.c | 1 -
112 files changed, 98 insertions(+), 776 deletions(-)
--
2.41.0
next reply other threads:[~2023-09-06 18:10 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-06 18:07 Mauro Carvalho Chehab [this message]
2023-09-06 18:07 ` [igt-dev] [PATCH i-g-t 1/6] test_list.py: add support for reading testlist regular expressions Mauro Carvalho Chehab
2023-09-06 18:07 ` [igt-dev] [PATCH i-g-t 2/6] xe_test_config.json: add testlists and blocklists Mauro Carvalho Chehab
2023-09-06 18:07 ` [igt-dev] [PATCH i-g-t 3/6] kms_test_config.json: " Mauro Carvalho Chehab
2023-09-06 18:07 ` [igt-dev] [PATCH i-g-t 4/6] tests: Intel Xe: drop Run type field Mauro Carvalho Chehab
2023-09-06 18:07 ` [igt-dev] [PATCH i-g-t 5/6] tests: Intel KMS: " Mauro Carvalho Chehab
2023-09-06 18:07 ` [igt-dev] [PATCH i-g-t 6/6] scripts/test_list.py: move "FULL" testlist to config file Mauro Carvalho Chehab
2023-09-06 20:56 ` [igt-dev] ✗ Fi.CI.BUILD: failure for Subject: Xe: set Run type from testlist instead of defining it Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230906181001.498395-1-mauro.chehab@linux.intel.com \
--to=mauro.chehab@linux.intel.com \
--cc=igt-dev@lists.freedesktop.org \
--cc=jari.tahvanainen@intel.com \
--cc=tomasz.mistat@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox