From: Swati Sharma <swati2.sharma@intel.com>
To: igt-dev@lists.freedesktop.org
Subject: [igt-dev] [PATCH i-g-t 5/5] tests/intel/kms_pm_dc: Add XE support
Date: Thu, 14 Sep 2023 19:34:01 +0530 [thread overview]
Message-ID: <20230914140401.11101-6-swati2.sharma@intel.com> (raw)
In-Reply-To: <20230914140401.11101-1-swati2.sharma@intel.com>
Add XE driver support for kms pm tests.
v2: -drop unused header
-add DRIVER_XE
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
---
tests/intel/kms_pm_dc.c | 20 +++++++++++---------
1 file changed, 11 insertions(+), 9 deletions(-)
diff --git a/tests/intel/kms_pm_dc.c b/tests/intel/kms_pm_dc.c
index e7ba1f919..1e9ca5d6c 100644
--- a/tests/intel/kms_pm_dc.c
+++ b/tests/intel/kms_pm_dc.c
@@ -36,6 +36,8 @@
#include "limits.h"
#include "time.h"
#include "igt_pm.h"
+#include "xe/xe_query.h"
+
/**
* TEST: kms pm dc
* Category: Display
@@ -44,7 +46,7 @@
* SUBTEST: dc3co-vpb-simulation
* Description: Make sure that system enters DC3CO when PSR2 is active and system
* is in SLEEP state
- * Driver requirement: i915
+ * Driver requirement: i915, xe
* Functionality: dc3co, pm_dc, psr2
* Mega feature: Display Power
* Test category: functionality test
@@ -52,7 +54,7 @@
* SUBTEST: dc5-dpms
* Description: Validate display engine entry to DC5 state while all connectors's
* DPMS property set to OFF
- * Driver requirement: i915
+ * Driver requirement: i915, xe
* Functionality: dpms, pm_dc
* Mega feature: Display Power
* Test category: functionality test
@@ -60,14 +62,14 @@
* SUBTEST: dc5-dpms-negative
* Description: Validate negative scenario of DC5 display engine entry to DC5 state
* while all connectors's DPMS property set to ON
- * Driver requirement: i915
+ * Driver requirement: i915, xe
* Functionality: dpms, pm_dc
* Mega feature: Display Power
* Test category: functionality test
*
* SUBTEST: dc5-psr
* Description: This test validates display engine entry to DC5 state while PSR is active
- * Driver requirement: i915
+ * Driver requirement: i915, xe
* Functionality: pm_dc, psr
* Mega feature: Display Power
* Test category: functionality test
@@ -75,21 +77,21 @@
* SUBTEST: dc6-dpms
* Description: Validate display engine entry to DC6 state while all connectors's
* DPMS property set to OFF
- * Driver requirement: i915
+ * Driver requirement: i915, xe
* Functionality: dpms, pm_dc
* Mega feature: Display Power
* Test category: functionality test
*
* SUBTEST: dc6-psr
* Description: This test validates display engine entry to DC6 state while PSR is active
- * Driver requirement: i915
+ * Driver requirement: i915, xe
* Functionality: pm_dc, psr
* Mega feature: Display Power
* Test category: functionality test
*
* SUBTEST: dc9-dpms
* Description: This test validates display engine entry to DC9 state
- * Driver requirement: i915
+ * Driver requirement: i915, xe
* Functionality: dpms, pm_dc
* Mega feature: Display Power
* Test category: functionality test
@@ -648,7 +650,7 @@ igt_main
bool is_dgfx;
igt_fixture {
- data.drm_fd = drm_open_driver_master(DRIVER_INTEL);
+ data.drm_fd = drm_open_driver_master(DRIVER_INTEL | DRIVER_XE);
data.debugfs_fd = igt_debugfs_dir(data.drm_fd);
igt_require(data.debugfs_fd != -1);
data.debugfs_root_fd = open(igt_debugfs_mount(), O_RDONLY);
@@ -727,7 +729,7 @@ igt_main
igt_describe("This test validates display engine entry to DC9 state");
igt_subtest("dc9-dpms") {
- is_dgfx = gem_has_lmem(data.drm_fd);
+ is_dgfx = is_xe_device(data.drm_fd) ? xe_has_vram(data.drm_fd) : gem_has_lmem(data.drm_fd);
if (!is_dgfx)
igt_require_f(igt_pm_pc8_plus_residencies_enabled(data.msr_fd),
"PC8+ residencies not supported\n");
--
2.25.1
next prev parent reply other threads:[~2023-09-14 14:03 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-14 14:03 [igt-dev] [PATCH i-g-t 0/5] Add XE support for display PM tests Swati Sharma
2023-09-14 14:03 ` [igt-dev] [PATCH i-g-t 1/5] tests/intel/kms_pm_backlight: Add XE support Swati Sharma
2023-09-14 14:03 ` [igt-dev] [PATCH i-g-t 2/5] tests/intel/kms_pm_lpsp: " Swati Sharma
2023-09-14 14:03 ` [igt-dev] [PATCH i-g-t 3/5] tests/intel/kms_pm_dc: Use linear modifier to set primary plane Swati Sharma
2023-09-14 14:04 ` [igt-dev] [PATCH i-g-t 4/5] tests/intel/kms_pm_dc: Use gem_has_lmem() Swati Sharma
2023-09-14 14:04 ` Swati Sharma [this message]
2023-09-14 14:47 ` [igt-dev] [PATCH i-g-t 5/5] tests/intel/kms_pm_dc: Add XE support Modem, Bhanuprakash
2023-09-14 15:16 ` [igt-dev] ✓ Fi.CI.BAT: success for Add XE support for display PM tests (rev2) Patchwork
2023-09-14 15:45 ` [igt-dev] ✓ CI.xeBAT: " Patchwork
2023-09-14 19:35 ` [igt-dev] ✓ Fi.CI.IGT: " Patchwork
-- strict thread matches above, loose matches on Subject: below --
2023-09-08 17:50 [igt-dev] [PATCH i-g-t 0/5] Add XE support for display PM tests Swati Sharma
2023-09-08 17:50 ` [igt-dev] [PATCH i-g-t 5/5] tests/intel/kms_pm_dc: Add XE support Swati Sharma
2023-09-11 15:00 ` Modem, Bhanuprakash
2023-09-11 15:13 ` Sharma, Swati2
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230914140401.11101-6-swati2.sharma@intel.com \
--to=swati2.sharma@intel.com \
--cc=igt-dev@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox