Igt-dev Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Anshuman Gupta <anshuman.gupta@intel.com>
To: igt-dev@lists.freedesktop.org
Cc: rodrigo.vivi@intel.com
Subject: [igt-dev] [PATCH i-g-t v3 1/2] test/xe_pm: Add exit handler to close fw handle
Date: Fri, 29 Sep 2023 15:41:54 +0530	[thread overview]
Message-ID: <20230929101155.614980-2-anshuman.gupta@intel.com> (raw)
In-Reply-To: <20230929101155.614980-1-anshuman.gupta@intel.com>

Adding an exit handler to close the fw handle to make sure we don't
leak the fw in CI environment. Adding a IGT subtest group for the
test using the fw handle to runtime wake the device.
Scaling forcewake close exit handler for vram-d3cold-threshold
subtest, while doing so add the missing subtest Functionality
as well.

Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
---
 tests/intel/xe_pm.c | 34 +++++++++++++++++++++++++---------
 1 file changed, 25 insertions(+), 9 deletions(-)

diff --git a/tests/intel/xe_pm.c b/tests/intel/xe_pm.c
index fd28d5630..48518a5e5 100644
--- a/tests/intel/xe_pm.c
+++ b/tests/intel/xe_pm.c
@@ -39,6 +39,7 @@ typedef struct {
 } device_t;
 
 uint64_t orig_threshold;
+int fw_handle = -1;
 
 /* runtime_usage is only available if kernel build CONFIG_PM_ADVANCED_DEBUG */
 static bool runtime_usage_available(struct pci_device *pci)
@@ -166,6 +167,14 @@ static bool out_of_d3(device_t device, enum igt_acpi_d_state state)
 	return true;
 }
 
+static void close_fw_handle(int sig)
+{
+	if (fw_handle < 0)
+		return;
+
+	close(fw_handle);
+}
+
 /**
  * SUBTEST: %s-basic
  * Description: set GPU state to %arg[1] and test suspend/autoresume
@@ -381,7 +390,7 @@ static void test_vram_d3cold_threshold(device_t device, int sysfs_fd)
 	};
 	uint64_t vram_used_mb = 0, vram_total_mb = 0, threshold;
 	uint32_t bo, flags;
-	int handle, i;
+	int i;
 	bool active;
 	void *map;
 
@@ -427,10 +436,10 @@ static void test_vram_d3cold_threshold(device_t device, int sysfs_fd)
 	 * the device from runtime suspend.
 	 * Therefore open and close fw handle to wake the device.
 	 */
-	handle = igt_debugfs_open(device.fd_xe, "forcewake_all", O_RDONLY);
-	igt_assert(handle >= 0);
+	fw_handle = igt_debugfs_open(device.fd_xe, "forcewake_all", O_RDONLY);
+	igt_assert(fw_handle >= 0);
 	active = igt_get_runtime_pm_status() == IGT_RUNTIME_PM_STATUS_ACTIVE;
-	close(handle);
+	close(fw_handle);
 	igt_assert(active);
 
 	/* Test D3Cold again after freeing up the Xe BO */
@@ -535,11 +544,18 @@ igt_main
 		}
 	}
 
-	igt_describe("Validate whether card is limited to d3hot, if vram used > vram threshold");
-	igt_subtest("vram-d3cold-threshold") {
-		orig_threshold = get_vram_d3cold_threshold(sysfs_fd);
-		igt_install_exit_handler(vram_d3cold_threshold_restore);
-		test_vram_d3cold_threshold(device, sysfs_fd);
+	igt_subtest_group {
+		igt_fixture {
+			igt_install_exit_handler(close_fw_handle);
+		}
+
+		igt_describe("Validate whether card is limited to d3hot,"
+			     "if vram used > vram threshold");
+		igt_subtest("vram-d3cold-threshold") {
+			orig_threshold = get_vram_d3cold_threshold(sysfs_fd);
+			igt_install_exit_handler(vram_d3cold_threshold_restore);
+			test_vram_d3cold_threshold(device, sysfs_fd);
+		}
 	}
 
 	igt_fixture {
-- 
2.25.1

  reply	other threads:[~2023-09-29 10:12 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-09-29 10:11 [igt-dev] [PATCH i-g-t v3 0/2] Add d3 mmap test Anshuman Gupta
2023-09-29 10:11 ` Anshuman Gupta [this message]
2023-10-04 15:42   ` [igt-dev] [PATCH i-g-t v3 1/2] test/xe_pm: Add exit handler to close fw handle Rodrigo Vivi
2023-09-29 10:11 ` [igt-dev] [PATCH i-g-t v3 2/2] tests/xe_pm: Add d3-mmap IGT test Anshuman Gupta
2023-10-04 15:44   ` Rodrigo Vivi
2023-10-05 10:23   ` Kamil Konieczny
2023-10-05 10:27     ` Gupta, Anshuman
2023-09-29 10:58 ` [igt-dev] ✓ CI.xeBAT: success for Add d3 mmap test (rev2) Patchwork
2023-09-29 11:03 ` [igt-dev] ✓ Fi.CI.BAT: " Patchwork
2023-09-29 16:59 ` [igt-dev] ✗ Fi.CI.IGT: failure " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230929101155.614980-2-anshuman.gupta@intel.com \
    --to=anshuman.gupta@intel.com \
    --cc=igt-dev@lists.freedesktop.org \
    --cc=rodrigo.vivi@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox