From: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
To: igt-dev@lists.freedesktop.org
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Subject: [igt-dev] [PATCH i-g-t] tests/xe/xe_prime_self_import: Adjust buffer object sizes to min alignment
Date: Wed, 18 Oct 2023 10:31:36 +0200 [thread overview]
Message-ID: <20231018083136.9873-1-thomas.hellstrom@linux.intel.com> (raw)
Creating a buffer object in VRAM may require the size to be properly
aligned. Ensure the buffer object sizes are using the minimum required
alignment.
Cc: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
---
tests/intel/xe_prime_self_import.c | 40 +++++++++++++++---------------
1 file changed, 20 insertions(+), 20 deletions(-)
diff --git a/tests/intel/xe_prime_self_import.c b/tests/intel/xe_prime_self_import.c
index 994fd99f5..536230f9f 100644
--- a/tests/intel/xe_prime_self_import.c
+++ b/tests/intel/xe_prime_self_import.c
@@ -56,11 +56,10 @@
IGT_TEST_DESCRIPTION("Check whether prime import/export works on the same"
" device... but with different fds.");
-#define BO_SIZE (16*1024)
-
static char counter;
static int g_time_out = 5;
static pthread_barrier_t g_barrier;
+static size_t bo_size;
static void
check_bo(int fd1, uint32_t handle1, int fd2, uint32_t handle2)
@@ -69,25 +68,25 @@ check_bo(int fd1, uint32_t handle1, int fd2, uint32_t handle2)
int i;
- ptr1 = xe_bo_map(fd1, handle1, BO_SIZE);
- ptr2 = xe_bo_map(fd2, handle2, BO_SIZE);
+ ptr1 = xe_bo_map(fd1, handle1, bo_size);
+ ptr2 = xe_bo_map(fd2, handle2, bo_size);
/* TODO: Export fence for both and wait on them */
usleep(1000);
/* check whether it's still our old object first. */
- for (i = 0; i < BO_SIZE; i++) {
+ for (i = 0; i < bo_size; i++) {
igt_assert(ptr1[i] == counter);
igt_assert(ptr2[i] == counter);
}
counter++;
- memset(ptr1, counter, BO_SIZE);
- igt_assert(memcmp(ptr1, ptr2, BO_SIZE) == 0);
+ memset(ptr1, counter, bo_size);
+ igt_assert(memcmp(ptr1, ptr2, bo_size) == 0);
- munmap(ptr1, BO_SIZE);
- munmap(ptr2, BO_SIZE);
+ munmap(ptr1, bo_size);
+ munmap(ptr2, bo_size);
}
/**
@@ -106,7 +105,7 @@ static void test_with_fd_dup(void)
fd1 = drm_open_driver(DRIVER_XE);
fd2 = drm_open_driver(DRIVER_XE);
- handle = xe_bo_create_flags(fd1, 0, BO_SIZE, visible_vram_if_possible(fd1, 0));
+ handle = xe_bo_create_flags(fd1, 0, bo_size, visible_vram_if_possible(fd1, 0));
dma_buf_fd1 = prime_handle_to_fd(fd1, handle);
gem_close(fd1, handle);
@@ -139,8 +138,8 @@ static void test_with_two_bos(void)
fd1 = drm_open_driver(DRIVER_XE);
fd2 = drm_open_driver(DRIVER_XE);
- handle1 = xe_bo_create_flags(fd1, 0, BO_SIZE, visible_vram_if_possible(fd1, 0));
- handle2 = xe_bo_create_flags(fd1, 0, BO_SIZE, visible_vram_if_possible(fd1, 0));
+ handle1 = xe_bo_create_flags(fd1, 0, bo_size, visible_vram_if_possible(fd1, 0));
+ handle2 = xe_bo_create_flags(fd1, 0, bo_size, visible_vram_if_possible(fd1, 0));
dma_buf_fd = prime_handle_to_fd(fd1, handle1);
handle_import = prime_fd_to_handle(fd2, dma_buf_fd);
@@ -175,7 +174,7 @@ static void test_with_one_bo_two_files(void)
fd1 = drm_open_driver(DRIVER_XE);
fd2 = drm_open_driver(DRIVER_XE);
- handle_orig = xe_bo_create_flags(fd1, 0, BO_SIZE,
+ handle_orig = xe_bo_create_flags(fd1, 0, bo_size,
visible_vram_if_possible(fd1, 0));
dma_buf_fd1 = prime_handle_to_fd(fd1, handle_orig);
@@ -208,7 +207,7 @@ static void test_with_one_bo(void)
fd1 = drm_open_driver(DRIVER_XE);
fd2 = drm_open_driver(DRIVER_XE);
- handle = xe_bo_create_flags(fd1, 0, BO_SIZE, visible_vram_if_possible(fd1, 0));
+ handle = xe_bo_create_flags(fd1, 0, bo_size, visible_vram_if_possible(fd1, 0));
dma_buf_fd = prime_handle_to_fd(fd1, handle);
handle_import1 = prime_fd_to_handle(fd2, dma_buf_fd);
@@ -294,7 +293,7 @@ static void *thread_fn_reimport_vs_close(void *p)
fds[0] = drm_open_driver(DRIVER_XE);
- handle = xe_bo_create_flags(fds[0], 0, BO_SIZE,
+ handle = xe_bo_create_flags(fds[0], 0, bo_size,
visible_vram_if_possible(fds[0], 0));
fds[1] = prime_handle_to_fd(fds[0], handle);
@@ -337,7 +336,7 @@ static void *thread_fn_export_vs_close(void *p)
igt_until_timeout(g_time_out) {
/* We want to race gem close against prime export on handle one.*/
- handle = xe_bo_create_flags(fd, 0, 4096,
+ handle = xe_bo_create_flags(fd, 0, bo_size,
visible_vram_if_possible(fd, 0));
if (handle != 1)
gem_close(fd, handle);
@@ -463,7 +462,7 @@ static void test_llseek_bad(void)
fd = drm_open_driver(DRIVER_XE);
- handle = xe_bo_create_flags(fd, 0, BO_SIZE,
+ handle = xe_bo_create_flags(fd, 0, bo_size,
visible_vram_if_possible(fd, 0));
dma_buf_fd = prime_handle_to_fd(fd, handle);
@@ -473,9 +472,9 @@ static void test_llseek_bad(void)
igt_assert(lseek(dma_buf_fd, -1, SEEK_END) == -1 && errno == EINVAL);
igt_assert(lseek(dma_buf_fd, 1, SEEK_SET) == -1 && errno == EINVAL);
- igt_assert(lseek(dma_buf_fd, BO_SIZE, SEEK_SET) == -1 && errno == EINVAL);
- igt_assert(lseek(dma_buf_fd, BO_SIZE + 1, SEEK_SET) == -1 && errno == EINVAL);
- igt_assert(lseek(dma_buf_fd, BO_SIZE - 1, SEEK_SET) == -1 && errno == EINVAL);
+ igt_assert(lseek(dma_buf_fd, bo_size, SEEK_SET) == -1 && errno == EINVAL);
+ igt_assert(lseek(dma_buf_fd, bo_size + 1, SEEK_SET) == -1 && errno == EINVAL);
+ igt_assert(lseek(dma_buf_fd, bo_size - 1, SEEK_SET) == -1 && errno == EINVAL);
close(dma_buf_fd);
@@ -502,6 +501,7 @@ igt_main
igt_fixture {
fd = drm_open_driver(DRIVER_XE);
+ bo_size = xe_get_default_alignment(fd);
}
for (i = 0; i < ARRAY_SIZE(tests); i++) {
--
2.41.0
next reply other threads:[~2023-10-18 8:32 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-18 8:31 Thomas Hellström [this message]
2023-10-18 9:32 ` [igt-dev] ✗ Fi.CI.BAT: failure for tests/xe/xe_prime_self_import: Adjust buffer object sizes to min alignment Patchwork
2023-10-18 10:57 ` [igt-dev] ✓ CI.xeBAT: success " Patchwork
2023-10-24 15:01 ` [igt-dev] [PATCH i-g-t] " Matthew Brost
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231018083136.9873-1-thomas.hellstrom@linux.intel.com \
--to=thomas.hellstrom@linux.intel.com \
--cc=igt-dev@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox