Igt-dev Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Badal Nilawar <badal.nilawar@intel.com>
To: igt-dev@lists.freedesktop.org
Cc: rodrigo.vivi@intel.com, janga.rahul.kumar@intel.com
Subject: [PATCH i-g-t 2/2] tests/intel/xe_pm: Extend mocs-rpm test to support D3Cold
Date: Mon,  1 Jul 2024 20:24:39 +0530	[thread overview]
Message-ID: <20240701145439.91038-2-badal.nilawar@intel.com> (raw)
In-Reply-To: <20240701145439.91038-1-badal.nilawar@intel.com>

Use existing d3 helpers to cover D3Hot and D3Cold.

Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
---
 tests/intel/xe_pm.c | 49 +++++++++++++++++++++++++++++++--------------
 1 file changed, 34 insertions(+), 15 deletions(-)

diff --git a/tests/intel/xe_pm.c b/tests/intel/xe_pm.c
index b30e94a2a..eac5ea8a7 100644
--- a/tests/intel/xe_pm.c
+++ b/tests/intel/xe_pm.c
@@ -611,10 +611,15 @@ static void test_mmap(device_t device, uint32_t placement, uint32_t flags,
 }
 
 /**
- * SUBTEST: mocs-rpm
+ * SUBTEST: %s-mocs-rpm
  * Description:
  *     Validate mocs register contents over suspend resume
  *
+ * arg[2]:
+ *
+ * @d3hot:	d3hot
+ * @d3cold:	d3cold
+ *
  * Functionality: mocs registers
  * Run type: FULL
  */
@@ -629,9 +634,14 @@ static void test_mmap(device_t device, uint32_t placement, uint32_t flags,
  * @s3:		s3
  * @s4:		s4
  */
-static void test_mocs_suspend_resume(device_t device, int s_state)
+static void test_mocs_suspend_resume(device_t device, enum igt_suspend_state s_state,
+				     enum igt_acpi_d_state d_state)
 {
 	int gt;
+	uint64_t active_time;
+	bool check_rpm = (d_state == IGT_ACPI_D3Hot ||
+			  d_state == IGT_ACPI_D3Cold);
+
 
 	xe_for_each_gt(device.fd_xe, gt) {
 		char path[256];
@@ -644,19 +654,27 @@ static void test_mocs_suspend_resume(device_t device, int s_state)
 		igt_debugfs_dump(device.fd_xe, path);
 		igt_debugfs_read(device.fd_xe, path, mocs_content_pre);
 
-		if (s_state == NO_SUSPEND) {
+		if (check_rpm) {
+			igt_assert(in_d3(device, d_state));
+			active_time = igt_pm_get_runtime_active_time(device.pci_xe);
+
 			fw_handle = igt_debugfs_open(device.fd_xe, "forcewake_all", O_RDONLY);
 			igt_assert(fw_handle >= 0);
-			igt_assert(igt_get_runtime_pm_status() == IGT_RUNTIME_PM_STATUS_ACTIVE);
+			igt_assert(igt_pm_get_runtime_active_time(device.pci_xe) >
+				   active_time);
 
 			/* Make sure runtime pm goes back to suspended status after closing forcewake_all */
 			close(fw_handle);
-			igt_assert(igt_wait_for_pm_status(IGT_RUNTIME_PM_STATUS_SUSPENDED));
+			sleep(1);
+
+			igt_assert(in_d3(device, d_state));
 		} else {
-			enum igt_suspend_test test = s_state == SUSPEND_STATE_DISK ?
-				SUSPEND_TEST_DEVICES : SUSPEND_TEST_NONE;
+			if (s_state != NO_SUSPEND) {
+				enum igt_suspend_test test = s_state == SUSPEND_STATE_DISK ?
+					SUSPEND_TEST_DEVICES : SUSPEND_TEST_NONE;
 
-			igt_system_suspend_autoresume(s_state, test);
+				igt_system_suspend_autoresume(s_state, test);
+			}
 		}
 		igt_assert(igt_debugfs_exists(device.fd_xe, path, O_RDONLY));
 		igt_debugfs_dump(device.fd_xe, path);
@@ -766,7 +784,7 @@ igt_main
 		}
 
 		igt_subtest_f("%s-mocs", s->name)
-			test_mocs_suspend_resume(device, s->state);
+			test_mocs_suspend_resume(device, s->state, NO_RPM);
 	}
 
 	igt_fixture {
@@ -825,6 +843,13 @@ igt_main
 
 			igt_pm_set_autosuspend_delay(device.pci_xe, delay_ms);
 		}
+
+		igt_subtest_f("%s-mocs-rpm", d->name) {
+			igt_assert(setup_d3(device, d->state));
+			test_mocs_suspend_resume(device, NO_SUSPEND, d->state);
+			cleanup_d3(device);
+		}
+
 	}
 
 	igt_describe("Validate whether card is limited to d3hot,"
@@ -835,12 +860,6 @@ igt_main
 		test_vram_d3cold_threshold(device, sysfs_fd);
 	}
 
-	igt_subtest("mocs-rpm") {
-		dpms_on_off(device, DRM_MODE_DPMS_OFF);
-		test_mocs_suspend_resume(device, NO_SUSPEND);
-		dpms_on_off(device, DRM_MODE_DPMS_ON);
-	}
-
 	igt_fixture {
 		close(sysfs_fd);
 		igt_pm_set_d3cold_allowed(device.pci_slot_name, d3cold_allowed);
-- 
2.34.1


  reply	other threads:[~2024-07-01 14:37 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-07-01 14:54 [PATCH i-g-t 1/2] tests/intel/xe_pm: Install fw close exit handler before rpm tests Badal Nilawar
2024-07-01 14:54 ` Badal Nilawar [this message]
2024-07-02 10:49   ` [PATCH i-g-t 2/2] tests/intel/xe_pm: Extend mocs-rpm test to support D3Cold Riana Tauro
2024-07-02 16:54     ` Kamil Konieczny
2024-07-02 11:45 ` ✗ Fi.CI.BUILD: failure for series starting with [i-g-t,1/2] tests/intel/xe_pm: Install fw close exit handler before rpm tests Patchwork
2024-07-02 11:51 ` ✗ GitLab.Pipeline: warning " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240701145439.91038-2-badal.nilawar@intel.com \
    --to=badal.nilawar@intel.com \
    --cc=igt-dev@lists.freedesktop.org \
    --cc=janga.rahul.kumar@intel.com \
    --cc=rodrigo.vivi@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox