From: Pranay Samala <pranay.samala@intel.com>
To: igt-dev@lists.freedesktop.org
Cc: karthik.b.s@intel.com, kunal1.joshi@intel.com,
sameer.lattannavar@intel.com, pranay.samala@intel.com
Subject: [PATCH i-g-t v2 2/2] tests/kms: Simplify DRM debug mask update
Date: Thu, 20 Mar 2025 14:37:55 +0530 [thread overview]
Message-ID: <20250320090755.482723-3-pranay.samala@intel.com> (raw)
In-Reply-To: <20250320090755.482723-1-pranay.samala@intel.com>
This fixes directly sends the debug mask to be updated.
User can use bitmask option during execution and update
it as per the requirement. If user doesn't passes any
mask during the execution then it will update the debug
mask as 0x4 and at the end of the test, exit handler will
set the debug mask to the original value.
v2: Implementated to allow flexible bitmask usage during execution. (Jani)
Fixes: a2ab0ec12ef4 ("tests/kms_atomic_transition: Reducing debug loglevel dynamically")
Fixes: 4baeb7397d71 ("tests/intel/kms_dp_linktrain_fallback: Reduce debug loglevel dynamically")
Fixes: 7a8a3744466f ("tests/kms_cursor_legacy: Reduce debug loglevel dynamically")
Signed-off-by: Pranay Samala <pranay.samala@intel.com>
---
tests/intel/kms_dp_linktrain_fallback.c | 40 ++++++++++++++++++-------
tests/kms_atomic_transition.c | 25 +++++++++-------
tests/kms_cursor_legacy.c | 38 ++++++++++++++++-------
3 files changed, 72 insertions(+), 31 deletions(-)
diff --git a/tests/intel/kms_dp_linktrain_fallback.c b/tests/intel/kms_dp_linktrain_fallback.c
index 6a872efd2..f827b9479 100644
--- a/tests/intel/kms_dp_linktrain_fallback.c
+++ b/tests/intel/kms_dp_linktrain_fallback.c
@@ -608,12 +608,33 @@ static bool run_dsc_sst_fallaback_test(data_t *data)
return ran;
}
-igt_main
+static unsigned int parse_bitmask;
+static unsigned int def_mask = 0x4;
+
+static int opt_handler(int opt, int opt_index, void *_data)
+{
+ switch (opt) {
+ case 'b':
+ parse_bitmask = strtoul(optarg, NULL, 16);
+ break;
+ }
+
+ return IGT_OPT_HANDLER_SUCCESS;
+}
+
+static const struct option long_opts[] = {
+ { .name = "bitmask", .has_arg = true, .val = 'b', },
+ {}
+};
+
+static const char help_str[] =
+ " --bitmask\t\tSpecify a bitmask in hexadecimal\n";
+
+igt_main_args("", long_opts, help_str, opt_handler, NULL)
{
data_t data = {};
igt_fixture {
- int dir, current_log_level;
data.drm_fd = drm_open_driver_master(DRIVER_INTEL |
DRIVER_XE);
kmstest_set_vt_graphics_mode();
@@ -621,18 +642,17 @@ igt_main
igt_display_require_output(&data.display);
for_each_pipe(&data.display, data.pipe)
data.n_pipes++;
- dir = igt_sysfs_drm_module_params_open();
- if (dir >= 0) {
- current_log_level = igt_drm_debug_level_get(dir);
- close(dir);
-
- if (current_log_level > 10)
- igt_drm_debug_level_update(10);
- }
/*
* Some environments may have environment
* variable set to ignore long hpd, disable it for this test
*/
+
+ igt_install_exit_handler(igt_drm_debug_mask_reset_exit_handler);
+ if (parse_bitmask)
+ igt_drm_debug_mask_update(parse_bitmask);
+ else
+ igt_drm_debug_mask_update(def_mask);
+
igt_assert_f(igt_ignore_long_hpd(data.drm_fd, false),
"Unable to disable ignore long hpd\n");
}
diff --git a/tests/kms_atomic_transition.c b/tests/kms_atomic_transition.c
index 0342af206..9973ff263 100644
--- a/tests/kms_atomic_transition.c
+++ b/tests/kms_atomic_transition.c
@@ -1093,6 +1093,9 @@ static bool pipe_output_combo_valid(igt_display_t *display,
return ret;
}
+static unsigned int parse_bitmask;
+static unsigned int def_mask = 0x4;
+
static int opt_handler(int opt, int opt_index, void *_data)
{
data_t *data = _data;
@@ -1101,6 +1104,9 @@ static int opt_handler(int opt, int opt_index, void *_data)
case 'e':
data->extended = true;
break;
+ case 'b':
+ parse_bitmask = strtoul(optarg, NULL, 16);
+ break;
}
return IGT_OPT_HANDLER_SUCCESS;
@@ -1108,11 +1114,13 @@ static int opt_handler(int opt, int opt_index, void *_data)
static const struct option long_opts[] = {
{ .name = "extended", .has_arg = false, .val = 'e', },
+ { .name = "bitmask", .has_arg = true, .val = 'b', },
{}
};
static const char help_str[] =
- " --extended\t\tRun the extended tests\n";
+ " --extended\t\tRun the extended tests\n"
+ " --bitmask\t\tSpecify a bitmask in hexadecimal\n";
static data_t data;
@@ -1171,8 +1179,6 @@ igt_main_args("", long_opts, help_str, opt_handler, &data)
int pipe_count = 0;
igt_fixture {
- int dir, current_log_level;
-
data.drm_fd = drm_open_driver_master(DRIVER_ANY);
kmstest_set_vt_graphics_mode();
@@ -1185,14 +1191,11 @@ igt_main_args("", long_opts, help_str, opt_handler, &data)
for_each_connected_output(&data.display, output)
count++;
- dir = igt_sysfs_drm_module_params_open();
- if (dir >= 0) {
- current_log_level = igt_drm_debug_level_get(dir);
- close(dir);
-
- if (current_log_level > 10)
- igt_drm_debug_level_update(10);
- }
+ igt_install_exit_handler(igt_drm_debug_mask_reset_exit_handler);
+ if (parse_bitmask)
+ igt_drm_debug_mask_update(parse_bitmask);
+ else
+ igt_drm_debug_mask_update(def_mask);
}
igt_describe("Check toggling of primary plane with vblank");
diff --git a/tests/kms_cursor_legacy.c b/tests/kms_cursor_legacy.c
index 44f031e7b..2985e4852 100644
--- a/tests/kms_cursor_legacy.c
+++ b/tests/kms_cursor_legacy.c
@@ -1823,7 +1823,29 @@ static void modeset_atomic_cursor_hotspot(igt_display_t *display)
igt_remove_fb(display->drm_fd, &cursor_fb);
}
-igt_main
+static unsigned int parse_bitmask;
+static unsigned int def_mask = 0x4;
+
+static int opt_handler(int opt, int opt_index, void *_data)
+{
+ switch (opt) {
+ case 'b':
+ parse_bitmask = strtoul(optarg, NULL, 16);
+ break;
+ }
+
+ return IGT_OPT_HANDLER_SUCCESS;
+}
+
+static const struct option long_opts[] = {
+ { .name = "bitmask", .has_arg = true, .val = 'b', },
+ {}
+};
+
+static const char help_str[] =
+ " --bitmask\t\tSpecify a bitmask in hexadecimal\n";
+
+igt_main_args("", long_opts, help_str, opt_handler, NULL)
{
const int ncpus = sysconf(_SC_NPROCESSORS_ONLN);
igt_display_t display = { .drm_fd = -1 };
@@ -1839,7 +1861,6 @@ igt_main
};
igt_fixture {
- int dir, current_log_level;
display.drm_fd = drm_open_driver_master(DRIVER_ANY);
kmstest_set_vt_graphics_mode();
@@ -1851,14 +1872,11 @@ igt_main
*/
intel_psr2_restore = i915_psr2_sel_fetch_to_psr1(display.drm_fd, NULL);
- dir = igt_sysfs_drm_module_params_open();
- if (dir >= 0) {
- current_log_level = igt_drm_debug_level_get(dir);
- close(dir);
-
- if (current_log_level > 10)
- igt_drm_debug_level_update(10);
- }
+ igt_install_exit_handler(igt_drm_debug_mask_reset_exit_handler);
+ if (parse_bitmask)
+ igt_drm_debug_mask_update(parse_bitmask);
+ else
+ igt_drm_debug_mask_update(def_mask);
}
igt_describe("Test checks how many cursor updates we can fit between vblanks "
--
2.34.1
next prev parent reply other threads:[~2025-03-20 9:08 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-20 9:07 [PATCH i-g-t v2 0/2] Refactor DRM Debug Severity Handling for enhanced precision Pranay Samala
2025-03-20 9:07 ` [PATCH i-g-t v2 1/2] lib/igt_sysfs: Update DRM debug mask handling for verbosity control Pranay Samala
2025-03-21 11:13 ` Jani Nikula
2025-03-20 9:07 ` Pranay Samala [this message]
2025-03-20 9:32 ` ✓ Xe.CI.BAT: success for Refactor DRM Debug Severity Handling for enhanced precision (rev2) Patchwork
2025-03-20 9:52 ` ✗ i915.CI.BAT: failure " Patchwork
2025-03-20 10:23 ` ✗ Xe.CI.Full: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250320090755.482723-3-pranay.samala@intel.com \
--to=pranay.samala@intel.com \
--cc=igt-dev@lists.freedesktop.org \
--cc=karthik.b.s@intel.com \
--cc=kunal1.joshi@intel.com \
--cc=sameer.lattannavar@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox