From: Mohammed Bilal <mohammed.bilal@intel.com>
To: igt-dev@lists.freedesktop.org
Cc: jeevan.b@intel.com, sebastian.brzezinka@intel.com,
Mohammed Bilal <mohammed.bilal@intel.com>
Subject: [PATCH v4 2/2] tests/chamelium/audio: Fix resource leaks on assertion failure
Date: Mon, 16 Mar 2026 17:17:08 +0530 [thread overview]
Message-ID: <20260316114708.3342278-3-mohammed.bilal@intel.com> (raw)
In-Reply-To: <20260316114708.3342278-1-mohammed.bilal@intel.com>
Fatal assertions can bypass cleanup paths, causing resources to remain
unreleased when failures occur during audio tests.
Replace fatal assertions with non-fatal checks and route failures
through a common cleanup path to ensure proper cleanup. Exit early
on first failure to avoid testing remaining combinations unnecessarily.
v2:
-Refactor check condition (Sebastien)
v3:
-Update assert logic (Jeevan)
v4:
-Fix memory leak logic and update commit message (Sebastien)
Signed-off-by: Mohammed Bilal <mohammed.bilal@intel.com>
Reviewed-by: Jeevan B <jeevan.b@intel.com>
---
tests/chamelium/kms_chamelium_audio.c | 56 ++++++++++++++++++---------
1 file changed, 37 insertions(+), 19 deletions(-)
diff --git a/tests/chamelium/kms_chamelium_audio.c b/tests/chamelium/kms_chamelium_audio.c
index 2967e3c50..2f17ad91a 100644
--- a/tests/chamelium/kms_chamelium_audio.c
+++ b/tests/chamelium/kms_chamelium_audio.c
@@ -389,11 +389,11 @@ static int audio_output_frequencies_callback(void *data, void *buffer,
static bool test_audio_frequencies(struct audio_state *state)
{
int freq, step;
- int32_t *recv, *buf;
- double *channel;
+ int32_t *recv = NULL, *buf = NULL;
+ double *channel = NULL;
size_t i, j, streak;
- size_t recv_len, buf_len, buf_cap, channel_len;
- bool success;
+ size_t recv_len = 0, buf_len, buf_cap, channel_len;
+ bool success = false;
int capture_chan;
state->signal = audio_signal_init(state->playback.channels,
@@ -426,9 +426,12 @@ static bool test_audio_frequencies(struct audio_state *state)
audio_state_start(state, "frequencies");
- igt_assert_f(state->capture.rate == state->playback.rate,
- "Capture rate (%dHz) doesn't match playback rate (%dHz)\n",
- state->capture.rate, state->playback.rate);
+ if (state->capture.rate != state->playback.rate) {
+ igt_critical("Capture rate (%dHz) doesn't match playback "
+ "rate (%dHz)\n",
+ state->capture.rate, state->playback.rate);
+ goto out;
+ }
/* Needs to be a multiple of 128, because that's the number of samples
* we get per channel each time we receive an audio page from the
@@ -447,10 +450,6 @@ static bool test_audio_frequencies(struct audio_state *state)
buf = malloc(sizeof(int32_t) * buf_cap);
buf_len = 0;
- recv = NULL;
- recv_len = 0;
-
- success = false;
streak = 0;
while (!success && state->msec < AUDIO_TIMEOUT) {
audio_state_receive(state, &recv, &recv_len);
@@ -460,13 +459,21 @@ static bool test_audio_frequencies(struct audio_state *state)
if (buf_len < buf_cap)
continue;
- igt_assert(buf_len == buf_cap);
+ if (buf_len > buf_cap) {
+ igt_critical("Buffer overflow: %zu > %zu\n",
+ buf_len, buf_cap);
+ goto out;
+ }
igt_debug("Detecting audio signal, t=%d msec\n", state->msec);
for (j = 0; j < state->playback.channels; j++) {
capture_chan = state->channel_mapping[j];
- igt_assert(capture_chan >= 0);
+ if (capture_chan < 0) {
+ igt_critical("Invalid channel mapping for "
+ "channel %zu\n", j);
+ goto out;
+ }
igt_debug("Processing channel %zu (captured as "
"channel %d)\n",
j, capture_chan);
@@ -489,6 +496,7 @@ static bool test_audio_frequencies(struct audio_state *state)
success = streak == MIN_STREAK * state->playback.channels;
}
+out:
audio_state_stop(state, success);
free(recv);
@@ -587,6 +595,7 @@ static bool test_audio_flatline(struct audio_state *state)
recv = NULL;
recv_len = 0;
amp_success = false;
+ align_success = false;
streak = 0;
while (!amp_success && state->msec < AUDIO_TIMEOUT) {
audio_state_receive(state, &recv, &recv_len);
@@ -595,7 +604,11 @@ static bool test_audio_flatline(struct audio_state *state)
for (i = 0; i < state->playback.channels; i++) {
capture_chan = state->channel_mapping[i];
- igt_assert(capture_chan >= 0);
+ if (capture_chan < 0) {
+ igt_critical("Invalid channel mapping for "
+ "channel %zu\n", i);
+ goto out;
+ }
igt_debug("Processing channel %zu (captured as "
"channel %d)\n",
i, capture_chan);
@@ -661,6 +674,7 @@ static bool test_audio_flatline(struct audio_state *state)
}
}
+out:
success = amp_success && align_success;
audio_state_stop(state, success);
@@ -776,19 +790,23 @@ static void test_display_audio(chamelium_data_t *data,
audio_state_fini(&state);
alsa_close_output(alsa);
+
+ if (!success)
+ goto out;
}
}
- /* Make sure we tested at least one frequency and format. */
- igt_assert(run);
- /* Make sure all runs were successful. */
- igt_assert(success);
-
+out:
igt_remove_fb(data->drm_fd, &fb);
drmModeFreeConnector(connector);
free(alsa);
+
+ /* Make sure we tested at least one frequency and format. */
+ igt_assert(run);
+ /* Make sure all runs were successful. */
+ igt_assert(success);
}
static const char test_display_audio_edid_desc[] =
--
2.48.1
next prev parent reply other threads:[~2026-03-16 11:50 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-16 11:47 [PATCH v4 0/2] tests/chamelium/audio: Fix resource leaks in audio tests Mohammed Bilal
2026-03-16 11:47 ` [PATCH v4 1/2] tests/chamelium/audio: Fix ALSA handle leak on skipped audio config Mohammed Bilal
2026-03-16 11:47 ` Mohammed Bilal [this message]
2026-03-25 11:06 ` [PATCH v4 2/2] tests/chamelium/audio: Fix resource leaks on assertion failure Sebastian Brzezinka
2026-03-17 9:59 ` ✓ Xe.CI.BAT: success for tests/chamelium/audio: Fix resource leaks in audio tests (rev4) Patchwork
2026-03-17 12:19 ` ✓ i915.CI.BAT: " Patchwork
2026-03-18 15:36 ` ✓ Xe.CI.FULL: " Patchwork
2026-03-24 11:51 ` ✓ Xe.CI.BAT: success for tests/chamelium/audio: Fix resource leaks in audio tests (rev5) Patchwork
2026-03-24 11:58 ` ✓ i915.CI.BAT: " Patchwork
2026-03-24 20:03 ` ✗ i915.CI.Full: failure " Patchwork
2026-03-24 22:38 ` ✓ Xe.CI.FULL: success " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260316114708.3342278-3-mohammed.bilal@intel.com \
--to=mohammed.bilal@intel.com \
--cc=igt-dev@lists.freedesktop.org \
--cc=jeevan.b@intel.com \
--cc=sebastian.brzezinka@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox