Igt-dev Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
To: igt-dev@lists.freedesktop.org
Cc: "./cccmd"@freedesktop.org,
	"Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Subject: [PATCH i-g-t 3/3] tests/xe_exec_fault_mode: Add fault-mode workload subtests with suspend variants
Date: Thu, 21 May 2026 16:16:44 +0200	[thread overview]
Message-ID: <20260521141644.6502-4-thomas.hellstrom@linux.intel.com> (raw)
In-Reply-To: <20260521141644.6502-1-thomas.hellstrom@linux.intel.com>

Add run_fault_workload() using SUSPEND_STATE_NONE as a sentinel for the
no-suspend case.  All variants are registered from a single table:

  fault-mode-workload         (no suspend, 30s stress)
  s2idle-fault-mode-workload  (SUSPEND_STATE_FREEZE)
  s3-fault-mode-workload      (SUSPEND_STATE_S3)
  s4-fault-mode-workload      (SUSPEND_STATE_DISK)

The suspend variants perform a full suspend/resume cycle while the
preemptible spinner is running on an LR+fault-mode VM, then assert the
workload resumes and can be cleanly stopped.

To support the new code, include xe/xe_spin.h and hoist USER_FENCE_VALUE
to file scope.

Assisted-by: GitHub_Copilot:claude-sonnet-4.6
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
---
 tests/intel/xe_exec_fault_mode.c | 123 ++++++++++++++++++++++++++++++-
 1 file changed, 122 insertions(+), 1 deletion(-)

diff --git a/tests/intel/xe_exec_fault_mode.c b/tests/intel/xe_exec_fault_mode.c
index 3e92dfbd9..c0a067f04 100644
--- a/tests/intel/xe_exec_fault_mode.c
+++ b/tests/intel/xe_exec_fault_mode.c
@@ -21,9 +21,11 @@
 
 #include "xe/xe_ioctl.h"
 #include "xe/xe_query.h"
+#include "xe/xe_spin.h"
 #include <string.h>
 
 #define MAX_N_EXEC_QUEUES	16
+#define USER_FENCE_VALUE	0xdeadbeefdeadbeefull
 
 #define USERPTR		(0x1 << 0)
 #define REBIND		(0x1 << 1)
@@ -145,7 +147,6 @@ test_exec(int fd, struct drm_xe_engine_class_instance *eci,
 	uint32_t vm;
 	uint64_t addr = 0x1a0000;
 	uint64_t sync_addr = 0x101a0000;
-#define USER_FENCE_VALUE	0xdeadbeefdeadbeefull
 	struct drm_xe_sync sync[1] = {
 		{ .type = DRM_XE_SYNC_TYPE_USER_FENCE, .flags = DRM_XE_SYNC_FLAG_SIGNAL,
 	          .timeline_value = USER_FENCE_VALUE },
@@ -453,6 +454,109 @@ test_exec_main(int fd, int n_exec_queues, int n_execs, unsigned int flags)
 	}
 }
 
+#define SUSPEND_STATE_NONE ((enum igt_suspend_state)-1)
+
+/**
+ * SUBTEST: fault-mode-workload
+ * Description: Stress preemptible fault mode workload for 30s.
+ * Test category: functionality test
+ *
+ * SUBTEST: s2idle-fault-mode-workload
+ * Description: Suspend to idle (s2idle) with a preemptible fault mode workload running.
+ * Test category: functionality test
+ *
+ * SUBTEST: s3-fault-mode-workload
+ * Description: Suspend to RAM (s3) with a preemptible fault mode workload running.
+ * Test category: functionality test
+ *
+ * SUBTEST: s4-fault-mode-workload
+ * Description: Suspend to disk (s4) with a preemptible fault mode workload running.
+ * Test category: functionality test
+ */
+static void run_fault_workload(int fd, enum igt_suspend_state s_state)
+{
+	struct drm_xe_sync sync = {
+		.type = DRM_XE_SYNC_TYPE_USER_FENCE,
+		.flags = DRM_XE_SYNC_FLAG_SIGNAL,
+		.timeline_value = USER_FENCE_VALUE,
+	};
+	struct drm_xe_exec exec = {
+		.num_batch_buffer = 1,
+		.num_syncs = 1,
+		.syncs = to_user_pointer(&sync),
+	};
+	struct xe_spin *spin;
+	struct drm_xe_engine *engine;
+	uint64_t vm_sync;
+	size_t bo_size;
+	uint32_t vm;
+	uint32_t exec_queue;
+	uint64_t spin_addr;
+	uint64_t ahnd;
+	uint32_t bo;
+	uint32_t ts_1, ts_2;
+
+	vm = xe_vm_create(fd, DRM_XE_VM_CREATE_FLAG_LR_MODE |
+			  DRM_XE_VM_CREATE_FLAG_FAULT_MODE, 0);
+	ahnd = intel_allocator_open(fd, 0, INTEL_ALLOCATOR_RELOC);
+	bo_size = xe_bb_size(fd, sizeof(*spin));
+	engine = xe_find_engine_by_class(fd, DRM_XE_ENGINE_CLASS_COPY);
+	igt_assert(engine);
+
+	bo = xe_bo_create(fd, vm, bo_size, vram_if_possible(fd, engine->instance.gt_id),
+			  DRM_XE_GEM_CREATE_FLAG_NEEDS_VISIBLE_VRAM);
+	spin = xe_bo_map(fd, bo, bo_size);
+
+	exec_queue = xe_exec_queue_create(fd, vm, &engine->instance, 0);
+	spin_addr = intel_allocator_alloc_with_strategy(ahnd, bo, bo_size, 0,
+							ALLOC_STRATEGY_LOW_TO_HIGH);
+
+	sync.addr = to_user_pointer(&vm_sync);
+	xe_vm_bind_async(fd, vm, 0, bo, 0, spin_addr, bo_size, &sync, 1);
+	xe_wait_ufence(fd, &vm_sync, USER_FENCE_VALUE, 0, NSEC_PER_SEC);
+
+	xe_spin_init_opts(spin, .addr = spin_addr, .write_timestamp = true,
+			  .preempt = true);
+	sync.addr = spin_addr + (char *)&spin->exec_sync - (char *)spin;
+	exec.exec_queue_id = exec_queue;
+	exec.address = spin_addr;
+	xe_exec(fd, &exec);
+	xe_spin_wait_started(spin);
+
+	if (s_state != SUSPEND_STATE_NONE) {
+		enum igt_suspend_test test = s_state == SUSPEND_STATE_DISK ?
+					     SUSPEND_TEST_DEVICES : SUSPEND_TEST_NONE;
+		igt_system_suspend_autoresume(s_state, test);
+	} else {
+		sleep(30);
+	}
+
+	/* Collect and check timestamps - workload should still be running */
+	ts_1 = spin->timestamp;
+	sleep(1);
+	ts_2 = spin->timestamp;
+	igt_assert_neq_u32(ts_1, ts_2);
+
+	xe_spin_end(spin);
+	xe_wait_ufence(fd, &spin->exec_sync, USER_FENCE_VALUE, 0, NSEC_PER_SEC);
+
+	/* Check timestamps to make sure spinner is stopped */
+	ts_1 = spin->timestamp;
+	sleep(1);
+	ts_2 = spin->timestamp;
+	igt_assert_eq_u32(ts_1, ts_2);
+
+	sync.addr = to_user_pointer(&vm_sync);
+	xe_vm_unbind_async(fd, vm, 0, 0, spin_addr, bo_size, &sync, 1);
+	xe_wait_ufence(fd, &vm_sync, USER_FENCE_VALUE, 0, NSEC_PER_SEC);
+	munmap(spin, bo_size);
+	gem_close(fd, bo);
+
+	xe_exec_queue_destroy(fd, exec_queue);
+	xe_vm_destroy(fd, vm);
+	put_ahnd(ahnd);
+}
+
 int igt_main()
 {
 	struct drm_xe_engine_class_instance *hwe;
@@ -589,6 +693,23 @@ int igt_main()
 		xe_for_each_engine(fd, hwe)
 			test_exec(fd, hwe, 1, 1, ENABLE_SCRATCH | INVALID_VA);
 
+	{
+		static const struct {
+			const char *name;
+			enum igt_suspend_state state;
+		} suspend_states[] = {
+			{ "",        SUSPEND_STATE_NONE },
+			{ "s2idle-", SUSPEND_STATE_FREEZE },
+			{ "s3-",     SUSPEND_STATE_S3 },
+			{ "s4-",     SUSPEND_STATE_DISK },
+			{ NULL },
+		};
+
+		for (const __typeof__(*suspend_states) *s = suspend_states; s->name; s++)
+			igt_subtest_f("%sfault-mode-workload", s->name)
+				run_fault_workload(fd, s->state);
+	}
+
 	igt_fixture() {
 		drm_close_driver(fd);
 	}
-- 
2.54.0


  parent reply	other threads:[~2026-05-21 14:18 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-21 14:16 [PATCH i-g-t 0/3] xe: Test LR and fault mode workloads across suspend/resume Thomas Hellström
2026-05-21 14:16 ` [PATCH i-g-t 1/3] tests/xe_exec_compute_mode: Make lr-mode-workload spinner preemptible Thomas Hellström
2026-05-21 14:16 ` [PATCH i-g-t 2/3] tests/xe_exec_compute_mode: Add workload subtests with suspend variants Thomas Hellström
2026-05-21 14:16 ` Thomas Hellström [this message]
  -- strict thread matches above, loose matches on Subject: below --
2026-05-21 14:34 [PATCH RESEND i-g-t 0/3] xe: Test LR and fault mode workloads across suspend/resume Thomas Hellström
2026-05-21 14:34 ` [PATCH i-g-t 3/3] tests/xe_exec_fault_mode: Add fault-mode workload subtests with suspend variants Thomas Hellström

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260521141644.6502-4-thomas.hellstrom@linux.intel.com \
    --to=thomas.hellstrom@linux.intel.com \
    --cc="./cccmd"@freedesktop.org \
    --cc=igt-dev@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox