From: Jeevan B <jeevan.b@intel.com>
To: igt-dev@lists.freedesktop.org
Cc: dibin.moolakadan.subrahmanian@intel.com, Jeevan B <jeevan.b@intel.com>
Subject: [PATCH i-g-t] tests/intel/kms_pm_dc: Add test to validate YUV420 with DC3CO
Date: Tue, 7 Jul 2026 10:50:28 +0530 [thread overview]
Message-ID: <20260707052028.4022700-1-jeevan.b@intel.com> (raw)
Add a new validation test to ensure YUV420 works correctly when
DC3CO is enabled.
Signed-off-by: Jeevan B <jeevan.b@intel.com>
---
tests/intel/kms_pm_dc.c | 35 ++++++++++++++++++++++++++++-------
1 file changed, 28 insertions(+), 7 deletions(-)
diff --git a/tests/intel/kms_pm_dc.c b/tests/intel/kms_pm_dc.c
index ef53c5f96..db2601ac7 100644
--- a/tests/intel/kms_pm_dc.c
+++ b/tests/intel/kms_pm_dc.c
@@ -125,6 +125,7 @@ typedef struct {
igt_display_t display;
struct igt_fb fb_white, fb_rgb, fb_rgr;
enum psr_mode op_psr_mode;
+ uint32_t dc3co_fb_format;
drmModeModeInfo *mode;
igt_output_t *output;
bool runtime_suspend_disabled;
@@ -275,7 +276,7 @@ static void create_color_fb(data_t *data, igt_fb_t *fb, color_t *fb_color)
fb_id = igt_create_fb(data->drm_fd,
data->mode->hdisplay,
data->mode->vdisplay,
- DRM_FORMAT_XRGB8888,
+ data->dc3co_fb_format,
DRM_FORMAT_MOD_LINEAR,
fb);
igt_assert(fb_id);
@@ -300,6 +301,15 @@ static void assert_dc_counter_negative(data_t *data, int dc_flag, uint32_t prev_
static void setup_videoplayback(data_t *data)
{
+ igt_plane_t *primary;
+
+ primary = igt_output_get_plane_type(data->output,
+ DRM_PLANE_TYPE_PRIMARY);
+ igt_require_f(igt_plane_has_format_mod(primary, data->dc3co_fb_format,
+ DRM_FORMAT_MOD_LINEAR),
+ "Primary plane does not support format %s\n",
+ igt_format_str(data->dc3co_fb_format));
+
color_t red_green_blue[] = {
{ 1.0, 0.0, 0.0 },
{ 0.0, 1.0, 0.0 },
@@ -879,14 +889,20 @@ int igt_main()
igt_describe("In this test we make sure that system enters DC3CO "
"when PSR2 or PR is active and system is in SLEEP state");
igt_subtest_with_dynamic("dc3co-vpb-simulation") {
- static const struct dc3co_test_mode dc3co_modes[] = {
- { PSR_MODE_2, "psr2" },
- { PR_MODE, "pr" },
+ static const struct {
+ enum psr_mode mode;
+ uint32_t fb_format;
+ const char *name;
+ } dc3co_cases[] = {
+ { PSR_MODE_2, DRM_FORMAT_XRGB8888, "psr2-xrgb8888" },
+ { PR_MODE, DRM_FORMAT_XRGB8888, "pr-xrgb8888" },
+ { PSR_MODE_2, DRM_FORMAT_NV12, "psr2-yuv420" },
};
- for (int i = 0; i < ARRAY_SIZE(dc3co_modes); i++) {
- const char *name = dc3co_modes[i].name;
- data.op_psr_mode = dc3co_modes[i].mode;
+ for (int i = 0; i < ARRAY_SIZE(dc3co_cases); i++) {
+ const char *name = dc3co_cases[i].name;
+ data.op_psr_mode = dc3co_cases[i].mode;
+ data.dc3co_fb_format = dc3co_cases[i].fb_format;
igt_dynamic_f("%s", name) {
igt_require_f(intel_display_ver(data.devid) >= 35,
@@ -913,6 +929,7 @@ int igt_main()
for (int i = 0; i < ARRAY_SIZE(dc3co_modes); i++) {
const char *name = dc3co_modes[i].name;
data.op_psr_mode = dc3co_modes[i].mode;
+ data.dc3co_fb_format = DRM_FORMAT_XRGB8888;
igt_dynamic_f("%s", name) {
igt_require_f(intel_display_ver(data.devid) >= 35,
@@ -942,6 +959,7 @@ int igt_main()
for (int i = 0; i < ARRAY_SIZE(dc3co_modes); i++) {
const char *name = dc3co_modes[i].name;
data.op_psr_mode = dc3co_modes[i].mode;
+ data.dc3co_fb_format = DRM_FORMAT_XRGB8888;
igt_dynamic_f("%s", name) {
igt_require_f(intel_display_ver(data.devid) >= 35,
@@ -968,6 +986,7 @@ int igt_main()
for (int i = 0; i < ARRAY_SIZE(dc3co_modes); i++) {
const char *name = dc3co_modes[i].name;
data.op_psr_mode = dc3co_modes[i].mode;
+ data.dc3co_fb_format = DRM_FORMAT_XRGB8888;
igt_dynamic_f("%s", name) {
igt_require_f(intel_display_ver(data.devid) >= 35,
@@ -1011,6 +1030,7 @@ int igt_main()
igt_require_f(igt_pm_pc8_plus_residencies_enabled(data.msr_fd),
"PC8+ residencies not supported\n");
igt_require(intel_display_ver(data.devid) >= 20);
+ data.dc3co_fb_format = DRM_FORMAT_XRGB8888;
test_deep_pkgc_state(&data);
}
@@ -1039,6 +1059,7 @@ int igt_main()
igt_require(psr_sink_support(data.drm_fd, data.debugfs_fd,
PSR_MODE_1, NULL));
data.op_psr_mode = PSR_MODE_1;
+ data.dc3co_fb_format = DRM_FORMAT_XRGB8888;
psr_enable(data.drm_fd, data.debugfs_fd, data.op_psr_mode, NULL);
igt_require(!psr_disabled_check(data.debugfs_fd));
test_dc5_pageflip_negative(&data, IGT_INTEL_CHECK_DC5);
--
2.43.0
next reply other threads:[~2026-07-07 5:21 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-07 5:20 Jeevan B [this message]
2026-07-07 12:06 ` ✗ Xe.CI.BAT: failure for tests/intel/kms_pm_dc: Add test to validate YUV420 with DC3CO Patchwork
2026-07-07 12:23 ` ✓ i915.CI.BAT: success " Patchwork
2026-07-07 13:29 ` ✗ Xe.CI.FULL: failure " Patchwork
2026-07-08 2:32 ` ✗ i915.CI.Full: " Patchwork
2026-07-13 8:21 ` [PATCH i-g-t] " Dibin Moolakadan Subrahmanian
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260707052028.4022700-1-jeevan.b@intel.com \
--to=jeevan.b@intel.com \
--cc=dibin.moolakadan.subrahmanian@intel.com \
--cc=igt-dev@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox