From: Swati Sharma <swati2.sharma@intel.com>
To: igt-dev@lists.freedesktop.org
Cc: Swati Sharma <swati2.sharma@intel.com>
Subject: [PATCH i-g-t 1/2] tests/intel: Add kms_hdmi_audio_bw test
Date: Fri, 14 Aug 2026 17:46:14 +0530 [thread overview]
Message-ID: <20260814121614.168593-1-swati2.sharma@intel.com> (raw)
Add a new IGT test to validate HDMI TMDS audio bandwidth constraints
under constrained horizontal blanking intervals.
The test injects EDIDs declaring all 7 CEA sample rates (32kHz-192kHz)
and observes which rates the driver exposes via ELD (EDID-Like Data)
under varying BPC and channel configurations.
Subtests:
- audio-bw-supported: Baseline with hblank=160 where audio bandwidth
is sufficient for all configurations.
- audio-bw-pruned: Constrained hblank=80 (CVT RB2) where the driver
must prune unsustainable sample rates or disable audio entirely.
- suspend-s3/s4-audio-recovery: Verify audio state and sample rates
are preserved across system suspend/resume.
- runtime-suspend-audio-recovery: Verify audio state is preserved
across DPMS off/on cycles.
The test uses the HDMI TMDS bandwidth formula from the spec:
pkts_avail = FLOOR((CEIL(hblank * bpc/8) - overhead) / 32)
pkts_reqd = CEIL(R_AP * T_line)
where overhead=74 (HDCP 1.4 rekey always reserved by the driver).
Assertions verify:
- Audio is active when bandwidth is available (pkts_avail > 0)
- Audio is inactive when bandwidth is exhausted (pkts_avail == 0)
- No sample rate requiring more packets than available appears in ELD
Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Assisted-by: GitHub Copilot:Claude Opus 4.6
---
tests/intel/kms_hdmi_audio_bw.c | 626 ++++++++++++++++++++++++++++++++
tests/meson.build | 1 +
2 files changed, 627 insertions(+)
create mode 100644 tests/intel/kms_hdmi_audio_bw.c
diff --git a/tests/intel/kms_hdmi_audio_bw.c b/tests/intel/kms_hdmi_audio_bw.c
new file mode 100644
index 000000000..4b6f0d001
--- /dev/null
+++ b/tests/intel/kms_hdmi_audio_bw.c
@@ -0,0 +1,626 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright © 2026 Intel Corporation
+ */
+
+/**
+ * TEST: kms hdmi audio bw
+ * Category: Display
+ * Description: Validate HDMI TMDS audio bandwidth constraints by injecting
+ * EDIDs with all sample rates declared and observing which rates
+ * the driver exposes (via ELD) under varying BPC / channel /
+ * hblank configurations.
+ * Driver requirement: i915, xe
+ * Mega feature: Display Audio
+ */
+
+#include "config.h"
+
+#include <math.h>
+#include <string.h>
+
+#include "igt.h"
+#include "igt_edid.h"
+#include "igt_eld.h"
+#include "igt_aux.h"
+#include "xe/xe_query.h"
+
+/**
+ * SUBTEST: audio-bw-supported
+ * Description: Baseline test with hblank=160 where audio bandwidth is
+ * sufficient for all BPC and channel combinations. Verifies
+ * that no sample rates are pruned.
+ *
+ * SUBTEST: audio-bw-pruned
+ * Description: Constrained test with hblank=80 (CVT RB2) where audio
+ * bandwidth is limited. Logs which sample rates are pruned
+ * per BPC and channel combination.
+ *
+ * SUBTEST: suspend-%s-audio-recovery
+ * Description: Validate audio state restoration after %arg[1] with
+ * constrained hblank=80 and 12bpc.
+ *
+ * arg[1]:
+ *
+ * @s3: S3 (suspend to RAM)
+ * @s4: S4 (hibernate)
+ *
+ * SUBTEST: runtime-suspend-audio-recovery
+ * Description: Validate audio state restoration after runtime suspend/resume
+ * with constrained hblank=80 and 12bpc.
+ */
+
+IGT_TEST_DESCRIPTION("Validate HDMI TMDS audio bandwidth constraints. "
+ "EDIDs declare all sample rates (32k-192k); the test "
+ "observes which rates survive in the ELD under "
+ "constrained hblank timings.");
+
+typedef struct {
+ int drm_fd;
+ igt_display_t display;
+ igt_output_t *output;
+ igt_crtc_t *crtc;
+ struct igt_fb fb;
+} data_t;
+
+/* All sample rates declared in the EDID SAD */
+#define ALL_SAMPLE_RATES (CEA_SAD_SAMPLING_RATE_32KHZ | \
+ CEA_SAD_SAMPLING_RATE_44KHZ | \
+ CEA_SAD_SAMPLING_RATE_48KHZ | \
+ CEA_SAD_SAMPLING_RATE_88KHZ | \
+ CEA_SAD_SAMPLING_RATE_96KHZ | \
+ CEA_SAD_SAMPLING_RATE_176KHZ | \
+ CEA_SAD_SAMPLING_RATE_192KHZ)
+
+struct rate_info {
+ unsigned int flag;
+ const char *name;
+ int freq_hz;
+};
+
+static const struct rate_info rate_table[] = {
+ { CEA_SAD_SAMPLING_RATE_32KHZ, "32k", 32000 },
+ { CEA_SAD_SAMPLING_RATE_44KHZ, "44.1k", 44100 },
+ { CEA_SAD_SAMPLING_RATE_48KHZ, "48k", 48000 },
+ { CEA_SAD_SAMPLING_RATE_88KHZ, "88k", 88200 },
+ { CEA_SAD_SAMPLING_RATE_96KHZ, "96k", 96000 },
+ { CEA_SAD_SAMPLING_RATE_176KHZ, "176k", 176400 },
+ { CEA_SAD_SAMPLING_RATE_192KHZ, "192k", 192000 },
+};
+
+#define ACR_RATE_MAX 1500
+#define TOLERANCE_AUDIOCLK_PPM 1000
+#define TOLERANCE_PIXELCLK 0.005
+#define HBLANK_OVERHEAD_STD 30
+#define HBLANK_OVERHEAD_HDCP14 74
+#define DI_PACKET_SIZE 32
+
+static void rates_to_str(unsigned int rates, char *buf, size_t len)
+{
+ int pos = 0;
+
+ buf[0] = '\0';
+ for (int i = 0; i < ARRAY_SIZE(rate_table); i++) {
+ if (!(rates & rate_table[i].flag))
+ continue;
+ if (pos > 0)
+ pos += snprintf(buf + pos, len - pos, ",");
+ pos += snprintf(buf + pos, len - pos, "%s", rate_table[i].name);
+ }
+ if (pos == 0)
+ snprintf(buf, len, "none");
+}
+
+static const int bpc_values[] = { 8, 10, 12 };
+static const int channel_values[] = { 2, 8 };
+
+/*
+ * 1920x1080@60Hz CVT RB2 — hblank=80 (constrained)
+ * Available Packets/Line = FLOOR(((BPC/8)*80 - 74) / 32)
+ * 8bpc=0, 10bpc=0, 12bpc=1
+ */
+static const drmModeModeInfo mode_1080p_hblank80 = {
+ .clock = 133320,
+ .hdisplay = 1920,
+ .hsync_start = 1928,
+ .hsync_end = 1960,
+ .htotal = 2000, /* hblank = 80 */
+ .vdisplay = 1080,
+ .vsync_start = 1097,
+ .vsync_end = 1105,
+ .vtotal = 1111,
+ .vrefresh = 60,
+ .flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC,
+ .type = DRM_MODE_TYPE_DRIVER,
+ .name = "1920x1080",
+};
+
+/*
+ * 1920x1080@60Hz with hblank=160 (relaxed baseline)
+ * Enough hblank for audio at any BPC.
+ */
+static const drmModeModeInfo mode_1080p_hblank160 = {
+ .clock = 148500,
+ .hdisplay = 1920,
+ .hsync_start = 1968,
+ .hsync_end = 2000,
+ .htotal = 2080, /* hblank = 160 */
+ .vdisplay = 1080,
+ .vsync_start = 1097,
+ .vsync_end = 1105,
+ .vtotal = 1111,
+ .vrefresh = 60,
+ .flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC,
+ .type = DRM_MODE_TYPE_DRIVER,
+ .name = "1920x1080",
+};
+
+static igt_output_t *find_hdmi_output(igt_display_t *display)
+{
+ igt_output_t *output;
+
+ for_each_connected_output(display, output) {
+ drmModeConnector *c = output->config.connector;
+
+ if (c->connector_type == DRM_MODE_CONNECTOR_HDMIA ||
+ c->connector_type == DRM_MODE_CONNECTOR_HDMIB)
+ return output;
+ }
+
+ return NULL;
+}
+
+static int hblank_of(const drmModeModeInfo *mode)
+{
+ return mode->htotal - mode->hdisplay;
+}
+
+/*
+ * Driver always reserves HDCP 1.4 rekey overhead (74 clocks) even when
+ * HDCP is not active: 30 (standard) + 44 (HDCP 1.4 rekey quiet period).
+ * FIXME: once driver exposes HDCP state, use 30 for no HDCP, 74 for HDCP 1.4.
+ */
+static int avail_pkts_per_line(int bpc, int hblank)
+{
+ int overhead = HBLANK_OVERHEAD_HDCP14;
+ int tb_blank = (bpc * hblank + 7) / 8; /* CEIL(hblank * bpc/8) */
+ int avail = (tb_blank - overhead) / DI_PACKET_SIZE;
+
+ return avail > 0 ? avail : 0;
+}
+
+/* Packets required per line for a given audio rate and channel layout */
+static int required_pkts_per_line(const drmModeModeInfo *mode, int freq_hz,
+ int channels)
+{
+ double ap = (channels <= 2) ? 0.25 : 1.0;
+ double f_pixel_max = mode->clock * 1000.0 * (1 + TOLERANCE_PIXELCLK);
+ double t_line = mode->htotal / f_pixel_max;
+ double r_ap = ((freq_hz * ap) + (2 * ACR_RATE_MAX)) *
+ (1 + TOLERANCE_AUDIOCLK_PPM / 1e6);
+
+ double avg_pkts = r_ap * t_line;
+
+ return (int)avg_pkts + (avg_pkts > (int)avg_pkts ? 1 : 0);
+}
+
+/*
+ * Build a CEA EDID declaring all 7 sample rates in the SAD.
+ * Deep-color flags in HDMI VSDB match the requested bpc.
+ */
+static const struct edid *
+build_edid(int bpc, int audio_channels)
+{
+ static unsigned char raw_edid[2 * EDID_BLOCK_SIZE];
+ struct edid *edid;
+ struct edid_ext *ext;
+ struct edid_cea *cea;
+ struct edid_cea_data_block *block;
+ struct cea_sad sad;
+ struct hdmi_vsdb hdmi;
+ struct cea_speaker_alloc speakers;
+ size_t offset = 0;
+
+ memset(raw_edid, 0, sizeof(raw_edid));
+ edid = (struct edid *)raw_edid;
+ memcpy(edid, igt_kms_get_base_edid(), sizeof(struct edid));
+ edid->extensions_len = 1;
+
+ ext = &edid->extensions[0];
+ cea = &ext->data.cea;
+
+ if (audio_channels > 0) {
+ cea_sad_init_pcm(&sad,
+ audio_channels,
+ ALL_SAMPLE_RATES,
+ CEA_SAD_SAMPLE_SIZE_16 |
+ CEA_SAD_SAMPLE_SIZE_24);
+ block = (struct edid_cea_data_block *)&cea->data[offset];
+ offset += edid_cea_data_block_set_sad(block, &sad, 1);
+ }
+
+ memset(&hdmi, 0, sizeof(hdmi));
+ hdmi.src_phy_addr[0] = 0x10;
+ hdmi.src_phy_addr[1] = 0x00;
+ hdmi.flags1 = HDMI_VSDB_SUPPORTS_AI;
+ hdmi.max_tdms_clock = 340000000 / (5 * 1000000);
+
+ switch (bpc) {
+ case 12:
+ hdmi.flags1 |= HDMI_VSDB_DC_36BIT;
+ /* fall through */
+ case 10:
+ hdmi.flags1 |= HDMI_VSDB_DC_30BIT;
+ /* fall through */
+ case 8:
+ break;
+ }
+
+ block = (struct edid_cea_data_block *)&cea->data[offset];
+ offset += edid_cea_data_block_set_hdmi_vsdb(block, &hdmi,
+ sizeof(hdmi));
+
+ memset(&speakers, 0, sizeof(speakers));
+ speakers.speakers = CEA_SPEAKER_FRONT_LEFT_RIGHT;
+ if (audio_channels > 2)
+ speakers.speakers |= CEA_SPEAKER_FRONT_CENTER |
+ CEA_SPEAKER_LFE |
+ CEA_SPEAKER_REAR_LEFT_RIGHT;
+ block = (struct edid_cea_data_block *)&cea->data[offset];
+ offset += edid_cea_data_block_set_speaker_alloc(block, &speakers);
+
+ edid_ext_set_cea(ext, offset, 0,
+ EDID_CEA_BASIC_AUDIO | EDID_CEA_UNDERSCAN |
+ EDID_CEA_YCBCR444 | EDID_CEA_YCBCR422);
+ edid_update_checksum(edid);
+
+ return edid;
+}
+
+static void force_edid_and_connector(data_t *data, const struct edid *edid)
+{
+ kmstest_force_edid(data->drm_fd, data->output->config.connector, edid);
+ igt_skip_on_f(!kmstest_force_connector(data->drm_fd,
+ data->output->config.connector,
+ FORCE_CONNECTOR_ON),
+ "Could not force HDMI connector on\n");
+}
+
+static void cleanup_connector(data_t *data)
+{
+ if (data->output->pending_crtc) {
+ igt_plane_t *primary;
+
+ primary = igt_output_get_plane_type(data->output,
+ DRM_PLANE_TYPE_PRIMARY);
+ igt_plane_set_fb(primary, NULL);
+ igt_output_set_crtc(data->output, NULL);
+ igt_display_commit2(&data->display, COMMIT_ATOMIC);
+ }
+
+ igt_remove_fb(data->drm_fd, &data->fb);
+
+ kmstest_force_connector(data->drm_fd,
+ data->output->config.connector,
+ FORCE_CONNECTOR_UNSPECIFIED);
+ kmstest_force_edid(data->drm_fd,
+ data->output->config.connector, NULL);
+}
+
+static int try_modeset(data_t *data, const drmModeModeInfo *mode)
+{
+ igt_plane_t *primary;
+ int ret;
+
+ igt_display_reset(&data->display);
+
+ igt_output_set_crtc(data->output, data->crtc);
+ igt_output_override_mode(data->output, mode);
+
+ primary = igt_output_get_plane_type(data->output,
+ DRM_PLANE_TYPE_PRIMARY);
+
+ igt_create_pattern_fb(data->drm_fd,
+ mode->hdisplay, mode->vdisplay,
+ DRM_FORMAT_XRGB8888, DRM_FORMAT_MOD_LINEAR,
+ &data->fb);
+ igt_plane_set_fb(primary, &data->fb);
+
+ ret = igt_display_try_commit_atomic(&data->display,
+ DRM_MODE_ATOMIC_ALLOW_MODESET,
+ NULL);
+ if (ret) {
+ igt_plane_set_fb(primary, NULL);
+ igt_output_set_crtc(data->output, NULL);
+ igt_remove_fb(data->drm_fd, &data->fb);
+ }
+
+ return ret;
+}
+
+static bool audio_is_active(void)
+{
+ if (!eld_is_supported())
+ return false;
+
+ return eld_has_igt();
+}
+
+static unsigned int get_eld_rates(void)
+{
+ struct eld_entry eld;
+
+ if (!eld_get_igt(&eld))
+ return 0;
+
+ if (eld.sads_len == 0)
+ return 0;
+
+ return eld.sads[0].rates;
+}
+
+static void log_eld_rates(unsigned int declared, unsigned int eld_rates)
+{
+ char decl_str[128], eld_str[128], pruned_str[128];
+ unsigned int pruned = declared & ~eld_rates;
+
+ rates_to_str(declared, decl_str, sizeof(decl_str));
+ rates_to_str(eld_rates, eld_str, sizeof(eld_str));
+ rates_to_str(pruned, pruned_str, sizeof(pruned_str));
+
+ igt_info(" SAD declared: %s\n", decl_str);
+ igt_info(" ELD reports: %s\n", eld_str);
+ if (pruned)
+ igt_info(" Pruned: %s\n", pruned_str);
+}
+
+static void assert_per_rate(const drmModeModeInfo *mode, int channels,
+ int pkts_avail, unsigned int eld_rates)
+{
+ for (int i = 0; i < ARRAY_SIZE(rate_table); i++) {
+ int req = required_pkts_per_line(mode, rate_table[i].freq_hz,
+ channels);
+ bool in_eld = eld_rates & rate_table[i].flag;
+
+ /* A rate that can't fit must not appear in ELD */
+ igt_assert_f(!(req > pkts_avail && in_eld),
+ "%s: req=%d > avail=%d but rate present in ELD\n",
+ rate_table[i].name, req, pkts_avail);
+ }
+}
+
+static void log_per_rate_analysis(const drmModeModeInfo *mode,
+ int bpc, int channels,
+ int pkts_avail, unsigned int eld_rates)
+{
+ const char *layout = (channels <= 2) ? "L0" : "L1";
+
+ igt_info(" %-6s %-3s pkts: avail=%d\n",
+ "Rate", layout, pkts_avail);
+
+ for (int i = 0; i < ARRAY_SIZE(rate_table); i++) {
+ int req = required_pkts_per_line(mode, rate_table[i].freq_hz,
+ channels);
+ const char *expect = (req <= pkts_avail && pkts_avail > 0) ?
+ "fit" : "NO";
+ const char *eld_has = (eld_rates & rate_table[i].flag) ?
+ "yes" : "no";
+
+ igt_info(" %5s: req=%d fit=%s (ELD: %s)\n",
+ rate_table[i].name, req, expect, eld_has);
+ }
+}
+
+/* Run the BPC × channels matrix for a given mode/hblank. */
+static void test_audio_bw_matrix(data_t *data, const drmModeModeInfo *mode)
+{
+ int hblank = hblank_of(mode);
+
+ igt_info("=== Audio BW matrix: %s hblank=%d ===\n",
+ mode->name, hblank);
+
+ for (int b = 0; b < ARRAY_SIZE(bpc_values); b++) {
+ int bpc = bpc_values[b];
+
+ for (int c = 0; c < ARRAY_SIZE(channel_values); c++) {
+ int channels = channel_values[c];
+ const struct edid *edid;
+ int pkts, ret;
+ bool audio;
+ unsigned int eld_rates;
+
+ edid = build_edid(bpc, channels);
+ force_edid_and_connector(data, edid);
+
+ igt_output_set_prop_value(data->output,
+ IGT_CONNECTOR_MAX_BPC, bpc);
+
+ pkts = avail_pkts_per_line(bpc, hblank);
+
+ igt_info("\n %dbpc %dch hblank=%d avail_pkts=%d\n",
+ bpc, channels, hblank, pkts);
+
+ ret = try_modeset(data, mode);
+
+ if (ret) {
+ igt_info(" modeset: REJECTED\n");
+ cleanup_connector(data);
+ continue;
+ }
+
+ /* Allow ELD to propagate */
+ usleep(200 * 1000);
+
+ audio = audio_is_active();
+ eld_rates = audio ? get_eld_rates() : 0;
+
+ igt_info(" modeset: OK\n");
+ igt_info(" audio: %s\n", audio ? "active" : "inactive");
+
+ igt_assert_f(!(pkts == 0 && audio),
+ "Audio active with 0 available packets\n");
+ igt_assert_f(!(pkts > 0 && !audio),
+ "Audio inactive with %d available packets\n",
+ pkts);
+
+ if (audio) {
+ log_eld_rates(ALL_SAMPLE_RATES, eld_rates);
+ assert_per_rate(mode, channels, pkts,
+ eld_rates);
+ }
+
+ log_per_rate_analysis(mode, bpc, channels,
+ pkts, eld_rates);
+
+ cleanup_connector(data);
+ }
+ }
+
+ igt_info("\n=== End matrix ===\n");
+}
+
+static void test_audio_bw_supported(data_t *data)
+{
+ test_audio_bw_matrix(data, &mode_1080p_hblank160);
+}
+
+static void test_audio_bw_pruned(data_t *data)
+{
+ test_audio_bw_matrix(data, &mode_1080p_hblank80);
+}
+
+static void test_suspend_audio_recovery(data_t *data,
+ enum igt_suspend_state state)
+{
+ const struct edid *edid;
+ bool audio_before, audio_after;
+ unsigned int rates_before, rates_after;
+ char before_str[128], after_str[128];
+ int ret;
+
+ edid = build_edid(12, 2);
+ force_edid_and_connector(data, edid);
+
+ igt_output_set_prop_value(data->output, IGT_CONNECTOR_MAX_BPC, 12);
+
+ ret = try_modeset(data, &mode_1080p_hblank80);
+ igt_require(ret == 0);
+
+ usleep(200 * 1000);
+
+ audio_before = audio_is_active();
+ rates_before = audio_before ? get_eld_rates() : 0;
+ rates_to_str(rates_before, before_str, sizeof(before_str));
+ igt_info("Before suspend: audio=%d rates=%s\n",
+ audio_before, before_str);
+
+ igt_system_suspend_autoresume(state, SUSPEND_TEST_NONE);
+
+ usleep(200 * 1000);
+
+ audio_after = audio_is_active();
+ rates_after = audio_after ? get_eld_rates() : 0;
+ rates_to_str(rates_after, after_str, sizeof(after_str));
+ igt_info("After suspend: audio=%d rates=%s\n",
+ audio_after, after_str);
+
+ igt_assert_eq(audio_before, audio_after);
+ if (audio_before)
+ igt_assert_eq(rates_before, rates_after);
+
+ cleanup_connector(data);
+}
+
+static void test_runtime_suspend_audio(data_t *data)
+{
+ const struct edid *edid;
+ bool audio_before, audio_after;
+ unsigned int rates_before, rates_after;
+ char before_str[128], after_str[128];
+ int ret;
+
+ edid = build_edid(12, 2);
+ force_edid_and_connector(data, edid);
+
+ igt_output_set_prop_value(data->output, IGT_CONNECTOR_MAX_BPC, 12);
+
+ ret = try_modeset(data, &mode_1080p_hblank80);
+ igt_require(ret == 0);
+
+ usleep(200 * 1000);
+
+ audio_before = audio_is_active();
+ rates_before = audio_before ? get_eld_rates() : 0;
+ rates_to_str(rates_before, before_str, sizeof(before_str));
+ igt_info("Before runtime suspend: audio=%d rates=%s\n",
+ audio_before, before_str);
+
+ kmstest_set_connector_dpms(data->drm_fd,
+ data->output->config.connector,
+ DRM_MODE_DPMS_OFF);
+ usleep(500 * 1000);
+ kmstest_set_connector_dpms(data->drm_fd,
+ data->output->config.connector,
+ DRM_MODE_DPMS_ON);
+ usleep(500 * 1000);
+
+ audio_after = audio_is_active();
+ rates_after = audio_after ? get_eld_rates() : 0;
+ rates_to_str(rates_after, after_str, sizeof(after_str));
+ igt_info("After runtime suspend: audio=%d rates=%s\n",
+ audio_after, after_str);
+
+ igt_assert_eq(audio_before, audio_after);
+ if (audio_before)
+ igt_assert_eq(rates_before, rates_after);
+
+ cleanup_connector(data);
+}
+
+int igt_main()
+{
+ data_t data = {};
+
+ igt_fixture() {
+ data.drm_fd = drm_open_driver_master(DRIVER_INTEL | DRIVER_XE);
+ igt_require(is_intel_device(data.drm_fd));
+ kmstest_set_vt_graphics_mode();
+ igt_display_require(&data.display, data.drm_fd);
+
+ data.output = find_hdmi_output(&data.display);
+ igt_require_f(data.output, "No HDMI connector found\n");
+
+ data.crtc = igt_first_crtc(&data.display);
+ igt_require_f(data.crtc, "No usable CRTC found\n");
+ }
+
+ igt_describe("Baseline: hblank=160, audio should be fully supported "
+ "for all BPC and channel configurations.");
+ igt_subtest("audio-bw-supported")
+ test_audio_bw_supported(&data);
+
+ igt_describe("Constrained: hblank=80 (CVT RB2), audio may be pruned "
+ "or disabled depending on BPC.");
+ igt_subtest("audio-bw-pruned")
+ test_audio_bw_pruned(&data);
+
+ igt_describe("Validate audio recovery after S3 suspend with "
+ "constrained hblank.");
+ igt_subtest("suspend-s3-audio-recovery")
+ test_suspend_audio_recovery(&data, SUSPEND_STATE_MEM);
+
+ igt_describe("Validate audio recovery after S4 hibernate with "
+ "constrained hblank.");
+ igt_subtest("suspend-s4-audio-recovery")
+ test_suspend_audio_recovery(&data, SUSPEND_STATE_DISK);
+
+ igt_describe("Validate audio recovery after runtime suspend with "
+ "constrained hblank.");
+ igt_subtest("runtime-suspend-audio-recovery")
+ test_runtime_suspend_audio(&data);
+
+ igt_fixture() {
+ igt_display_fini(&data.display);
+ drm_close_driver(data.drm_fd);
+ }
+}
diff --git a/tests/meson.build b/tests/meson.build
index a62f447df..facb7ab5d 100644
--- a/tests/meson.build
+++ b/tests/meson.build
@@ -259,6 +259,7 @@ intel_kms_progs = [
'kms_fbc_dirty_rect',
'kms_fbcon_fbt',
'kms_fence_pin_leak',
+ 'kms_hdmi_audio_bw',
'kms_flip_scaled_crc',
'kms_flip_tiling',
'kms_frontbuffer_tracking',
--
2.25.1
next reply other threads:[~2026-08-14 12:07 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-14 12:16 Swati Sharma [this message]
-- strict thread matches above, loose matches on Subject: below --
2026-08-19 7:38 [PATCH i-g-t 1/2] tests/intel: Add kms_hdmi_audio_bw test Swati Sharma
2026-08-31 8:55 ` Borah, Chaitanya Kumar
2026-09-01 12:03 ` Borah, Chaitanya Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260814121614.168593-1-swati2.sharma@intel.com \
--to=swati2.sharma@intel.com \
--cc=igt-dev@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox