From: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
To: Ville Syrjala <ville.syrjala@linux.intel.com>,
igt-dev@lists.freedesktop.org
Cc: Bhanuprakash Modem <bhanuprakash.modem@intel.com>,
Swati Sharma <swati2.sharma@intel.com>
Subject: Re: [PATCH i-g-t v2 01/18] lib/intel_aux_pgtable: Library to add support for RGB16161616_64B format
Date: Mon, 23 Sep 2024 12:51:35 +0300 [thread overview]
Message-ID: <2a6f730c-e1c8-40eb-860b-5852bb4292a9@gmail.com> (raw)
In-Reply-To: <20240918120518.30258-2-ville.syrjala@linux.intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
On 18.9.2024 15.05, Ville Syrjala wrote:
> From: Melanie Lobo <melanie.lobo@intel.com>
>
> TGL+ supports RGB16161616_64B FP16 format which is a binary
> floating-point computer number format that occupies 16 bits
> in computer memory.
>
> This was tested with kernel patch,
> https://patchwork.freedesktop.org/series/124957/
> https://lore.kernel.org/all/20231201091133.23508-1-melanie.lobo@intel.com/
>
> [vsyrjala: s/0x1/0x10/ to make the format correct for TGL.
> The original number was for DG2/MTL media compression, but
> for those platforms bspec says:
> "Compression format from AUX page walk is ignored.
> Instead compression format from Surface State is used."
> so we can just always use the TGL numbers here.
> ]
>
> Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
> cc: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
> cc: Swati Sharma <swati2.sharma@intel.com>
> Signed-off-by: Melanie Lobo <melanie.lobo@intel.com>
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> ---
> lib/intel_aux_pgtable.c | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/lib/intel_aux_pgtable.c b/lib/intel_aux_pgtable.c
> index 3cbb0e26f35c..8ff48641619e 100644
> --- a/lib/intel_aux_pgtable.c
> +++ b/lib/intel_aux_pgtable.c
> @@ -22,6 +22,7 @@
> #define AUX_FORMAT_AYUV 0x09
> #define AUX_FORMAT_ARGB_8B 0x0A
> #define AUX_FORMAT_NV12_21 0x0F
> +#define AUX_FORMAT_RGBA16_FLOAT 0x10
>
> struct pgtable_level_desc {
> int idx_shift;
> @@ -306,6 +307,10 @@ static uint64_t pgt_get_l1_flags(const struct intel_buf *buf, int surface_idx)
> entry.e.format = AUX_FORMAT_ARGB_8B;
> entry.e.depth = bpp_to_depth_val(32);
> break;
> + case 64:
> + entry.e.format = AUX_FORMAT_RGBA16_FLOAT;
> + entry.e.depth = bpp_to_depth_val(64);
> + break;
> default:
> igt_assert(0);
> }
next prev parent reply other threads:[~2024-09-23 9:51 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-18 12:05 [PATCH i-g-t v2 00/18] Intel CCS + 10bpc/fp16 stuff Ville Syrjala
2024-09-18 12:05 ` [PATCH i-g-t v2 01/18] lib/intel_aux_pgtable: Library to add support for RGB16161616_64B format Ville Syrjala
2024-09-23 9:51 ` Juha-Pekka Heikkila [this message]
2024-09-18 12:05 ` [PATCH i-g-t v2 02/18] lib/rendercopy: Add specific support for 2:10:10:10 formats Ville Syrjala
2024-09-18 12:05 ` [PATCH i-g-t v2 03/18] lib/rendercopy: Use the proper compression format for 10bpc on dg2/lnl+ Ville Syrjala
2024-09-18 12:05 ` [PATCH i-g-t v2 04/18] lib/rendercopy: Use the proper compression format for 16bpc " Ville Syrjala
2024-09-18 12:05 ` [PATCH i-g-t v2 05/18] lib/rendercopy: Skip AUX surface setup in TGL+ Ville Syrjala
2024-09-23 9:51 ` Juha-Pekka Heikkila
2024-09-23 20:04 ` Ville Syrjälä
2024-09-18 12:05 ` [PATCH i-g-t v2 06/18] lib/igt_fb: Add 10bpc compression format for the blitter Ville Syrjala
2024-09-18 12:05 ` [PATCH i-g-t v2 07/18] lib/igt_fb: Add 16bpc " Ville Syrjala
2024-09-18 12:05 ` [PATCH i-g-t v2 08/18] lib/igt_fb: Try to fix block copy media compression handling Ville Syrjala
2024-09-18 12:05 ` [PATCH i-g-t v2 09/18] tests/kms_plane: Skip 10bpc formats with media compression Ville Syrjala
2024-09-18 12:05 ` [PATCH i-g-t v2 10/18] tests/kms_ccs: " Ville Syrjala
2024-09-23 9:52 ` Juha-Pekka Heikkila
2024-09-18 12:05 ` [PATCH i-g-t v2 11/18] lib/igt_fb: Treat 2:10:10:10 properly Ville Syrjala
2024-09-18 12:05 ` [PATCH i-g-t v2 12/18] lib/vebox: Add support for fp16 RGB formats Ville Syrjala
2024-09-18 12:05 ` [PATCH i-g-t v2 13/18] lib/vebox: Document that 2:10:10:10 is unusable with VEBOX Ville Syrjala
2024-09-23 9:54 ` Juha-Pekka Heikkila
2024-09-18 12:05 ` [PATCH i-g-t v2 14/18] tests/kms_ccs: Correctly check clear color for 10bpc formats Ville Syrjala
2024-09-18 12:05 ` [PATCH i-g-t v2 15/18] tests/kms_ccs: Correctly check clear color for fp16 formats Ville Syrjala
2024-09-23 11:00 ` Juha-Pekka Heikkila
2024-09-23 16:39 ` Juha-Pekka Heikkila
2024-09-18 12:05 ` [PATCH i-g-t v2 16/18] tests/kms_ccs: Fix planar blits for xe2 Ville Syrjala
2024-09-23 16:53 ` Juha-Pekka Heikkila
2024-09-18 12:05 ` [PATCH i-g-t v2 17/18] tests/kms_ccs: Try to fix the xe2 blitter compression format Ville Syrjala
2024-09-23 17:28 ` Juha-Pekka Heikkila
2024-09-18 12:05 ` [PATCH i-g-t v2 18/18] lib/intel_aux_pgtable: Pick a more optimal aux format for 10bpc Ville Syrjala
2024-09-23 17:30 ` Juha-Pekka Heikkila
2024-09-18 13:59 ` ✓ Fi.CI.BAT: success for Intel CCS + 10bpc/fp16 stuff (rev4) Patchwork
2024-09-18 14:40 ` ✓ CI.xeBAT: " Patchwork
2024-09-18 20:53 ` ✗ CI.xeFULL: failure " Patchwork
2024-09-19 4:08 ` ✗ Fi.CI.IGT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2a6f730c-e1c8-40eb-860b-5852bb4292a9@gmail.com \
--to=juhapekka.heikkila@gmail.com \
--cc=bhanuprakash.modem@intel.com \
--cc=igt-dev@lists.freedesktop.org \
--cc=swati2.sharma@intel.com \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox