From: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
To: Maxime Ripard <maxime.ripard@bootlin.com>, igt-dev@lists.freedesktop.org
Cc: Petri Latvala <petri.latvala@intel.com>,
eben@raspberrypi.org,
Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Subject: Re: [igt-dev] [PATCH RESEND i-g-t 4/8] igt: tests: chamelium: Convert VGA tests to do_test_display
Date: Thu, 06 Dec 2018 15:15:42 +0100 [thread overview]
Message-ID: <439ef910b43250f99b7319b6e3e137c9b89083c6.camel@bootlin.com> (raw)
In-Reply-To: <20181204102509.18401-5-maxime.ripard@bootlin.com>
Hi,
On Tue, 2018-12-04 at 11:25 +0100, Maxime Ripard wrote:
> The VGA tests were run so far as part of a separate function. However,
> the only difference between that function and the do_test_display
> function was the kind of comparison we wanted to use. Indeed, VGA
> being an analog output, we can't rely on a pixel perfect image, and
> thus only compare the CRCs, but we need to make some more advanced
> comparison.
>
> Let's add a new check method, add support for the analog check to
> do_test_display and remove the old version.
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
> ---
> tests/kms_chamelium.c | 92 ++++++++++++++++---------------------------
> 1 file changed, 33 insertions(+), 59 deletions(-)
>
> diff --git a/tests/kms_chamelium.c b/tests/kms_chamelium.c
> index 8b9872a17044..80b279c4f1c2 100644
> --- a/tests/kms_chamelium.c
> +++ b/tests/kms_chamelium.c
> @@ -527,6 +527,7 @@ static int chamelium_get_pattern_fb(data_t *data, drmModeModeInfo *mode,
> }
>
> enum chamelium_check {
> + CHAMELIUM_CHECK_ANALOG,
> CHAMELIUM_CHECK_CRC,
> };
>
> @@ -578,6 +579,18 @@ static void do_test_display(data_t *data, struct chamelium_port *port,
>
> free(expected_crc);
> free(crc);
> + } else if (check == CHAMELIUM_CHECK_ANALOG) {
> + struct chamelium_frame_dump *dump;
> +
> + igt_assert(count == 1);
> +
> + dump = chamelium_port_dump_pixels(data->chamelium, port, 0, 0,
> + 0, 0);
> + chamelium_crop_analog_frame(dump, mode->hdisplay,
> + mode->vdisplay);
> + chamelium_assert_analog_frame_match_or_dump(data->chamelium,
> + port, dump, &fb);
> + chamelium_destroy_frame_dump(dump);
> }
>
> igt_remove_fb(data->drm_fd, &frame_fb);
> @@ -588,8 +601,9 @@ static void test_display_one_mode(data_t *data, struct chamelium_port *port,
> uint32_t fourcc, enum chamelium_check check,
> int count)
> {
> - igt_output_t *output;
> drmModeConnector *connector;
> + drmModeModeInfo *mode;
> + igt_output_t *output;
> igt_plane_t *primary;
>
> reset_state(data, port);
> @@ -599,8 +613,14 @@ static void test_display_one_mode(data_t *data, struct chamelium_port *port,
> primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
> igt_assert(primary);
>
> - do_test_display(data, port, output, &connector->modes[0], fourcc,
> - check, count);
> + mode = &connector->modes[0];
> + if (check == CHAMELIUM_CHECK_ANALOG) {
> + bool bridge = check_analog_bridge(data, port);
> +
> + igt_assert(!(bridge && prune_vga_mode(data, mode)));
> + }
> +
> + do_test_display(data, port, output, mode, fourcc, check, count);
>
> drmModeFreeConnector(connector);
> }
> @@ -612,6 +632,7 @@ static void test_display_all_modes(data_t *data, struct chamelium_port *port,
> igt_output_t *output;
> igt_plane_t *primary;
> drmModeConnector *connector;
> + bool bridge;
> int i;
>
> reset_state(data, port);
> @@ -621,9 +642,16 @@ static void test_display_all_modes(data_t *data, struct chamelium_port *port,
> primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
> igt_assert(primary);
>
> + if (check == CHAMELIUM_CHECK_ANALOG)
> + bridge = check_analog_bridge(data, port);
> +
> for (i = 0; i < connector->count_modes; i++) {
> drmModeModeInfo *mode = &connector->modes[i];
>
> + if (check == CHAMELIUM_CHECK_ANALOG && bridge &&
> + prune_vga_mode(data, mode))
> + continue;
> +
> do_test_display(data, port, output, mode, fourcc, check, count);
> }
>
> @@ -674,61 +702,6 @@ test_display_frame_dump(data_t *data, struct chamelium_port *port)
> drmModeFreeConnector(connector);
> }
>
> -static void
> -test_analog_frame_dump(data_t *data, struct chamelium_port *port)
> -{
> - igt_output_t *output;
> - igt_plane_t *primary;
> - struct igt_fb fb;
> - struct chamelium_frame_dump *frame;
> - drmModeModeInfo *mode;
> - drmModeConnector *connector;
> - int fb_id, i;
> - bool bridge;
> -
> - reset_state(data, port);
> -
> - output = prepare_output(data, port);
> - connector = chamelium_port_get_connector(data->chamelium, port, false);
> - primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
> - igt_assert(primary);
> -
> - bridge = check_analog_bridge(data, port);
> -
> - for (i = 0; i < connector->count_modes; i++) {
> - mode = &connector->modes[i];
> -
> - if (bridge && prune_vga_mode(data, mode))
> - continue;
> -
> - fb_id = igt_create_color_pattern_fb(data->drm_fd,
> - mode->hdisplay, mode->vdisplay,
> - DRM_FORMAT_XRGB8888,
> - LOCAL_DRM_FORMAT_MOD_NONE,
> - 0, 0, 0, &fb);
> - igt_assert(fb_id > 0);
> -
> - enable_output(data, port, output, mode, &fb);
> -
> - igt_debug("Reading frame dumps from Chamelium...\n");
> -
> - frame = chamelium_port_dump_pixels(data->chamelium, port, 0, 0,
> - 0, 0);
> -
> - chamelium_crop_analog_frame(frame, mode->hdisplay,
> - mode->vdisplay);
> -
> - chamelium_assert_analog_frame_match_or_dump(data->chamelium,
> - port, frame, &fb);
> -
> - chamelium_destroy_frame_dump(frame);
> -
> - igt_remove_fb(data->drm_fd, &fb);
> - }
> -
> - drmModeFreeConnector(connector);
> -}
> -
> static void
> test_hpd_without_ddc(data_t *data, struct chamelium_port *port)
> {
> @@ -1040,7 +1013,8 @@ igt_main
> test_hpd_without_ddc(&data, port);
>
> connector_subtest("vga-frame-dump", VGA)
> - test_analog_frame_dump(&data, port);
> + test_display_all_modes(&data, port, DRM_FORMAT_XRGB8888,
> + CHAMELIUM_CHECK_ANALOG, 1);
> }
>
> igt_subtest_group {
--
Paul Kocialkowski, Bootlin (formerly Free Electrons)
Embedded Linux and kernel engineering
https://bootlin.com
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev
next prev parent reply other threads:[~2018-12-06 14:15 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-04 10:25 [igt-dev] [PATCH RESEND i-g-t 0/8] igt: chamelium: Test YUV buffers using the Chamelium Maxime Ripard
2018-12-04 10:25 ` [igt-dev] [PATCH RESEND i-g-t 1/8] chamelium: Fix inverted xr24 pattern paint dimensions Maxime Ripard
2018-12-04 10:25 ` [igt-dev] [PATCH RESEND i-g-t 2/8] chamelium: Pass and use stride for xr24 pattern paint Maxime Ripard
2018-12-04 10:25 ` [igt-dev] [PATCH RESEND i-g-t 3/8] igt: tests: chamelium: Start to unify tests Maxime Ripard
2018-12-06 14:15 ` Paul Kocialkowski
2018-12-04 10:25 ` [igt-dev] [PATCH RESEND i-g-t 4/8] igt: tests: chamelium: Convert VGA tests to do_test_display Maxime Ripard
2018-12-06 14:15 ` Paul Kocialkowski [this message]
2018-12-04 10:25 ` [igt-dev] [PATCH RESEND i-g-t 5/8] igt: fb: Move i915 buffer allocation to a function of its own Maxime Ripard
2018-12-04 10:25 ` [igt-dev] [PATCH RESEND i-g-t 6/8] igt: fb: Separate YUV allocation from the rest Maxime Ripard
2018-12-04 10:25 ` [igt-dev] [PATCH RESEND i-g-t 7/8] igt: fb: Fallback on KMS dumb buffer allocation for YUV buffers Maxime Ripard
2018-12-06 14:28 ` Paul Kocialkowski
2018-12-04 10:25 ` [igt-dev] [PATCH RESEND i-g-t 8/8] igt: tests: chamelium: Add NV12 format Maxime Ripard
2018-12-07 9:18 ` Paul Kocialkowski
2018-12-04 12:40 ` [igt-dev] ✓ Fi.CI.BAT: success for igt: chamelium: Test YUV buffers using the Chamelium (rev2) Patchwork
2018-12-04 17:45 ` [igt-dev] ✓ Fi.CI.IGT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=439ef910b43250f99b7319b6e3e137c9b89083c6.camel@bootlin.com \
--to=paul.kocialkowski@bootlin.com \
--cc=eben@raspberrypi.org \
--cc=igt-dev@lists.freedesktop.org \
--cc=maxime.ripard@bootlin.com \
--cc=petri.latvala@intel.com \
--cc=thomas.petazzoni@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox