Re: [igt-dev] [PATCH i-g-t] tests/kms_fbcon_fbt: When restoring fbcon always set mode to text mode

["Souza, Jose" <jose.souza@intel.com>]

On Fri, 2020-05-29 at 21:19 +0530, Shankar, Uma wrote:
> > -----Original Message-----
> > From: igt-dev <igt-dev-bounces@lists.freedesktop.org> On Behalf Of José Roberto
> > de Souza
> > Sent: Friday, May 29, 2020 6:22 AM
> > To: igt-dev@lists.freedesktop.org
> > Subject: [igt-dev] [PATCH i-g-t] tests/kms_fbcon_fbt: When restoring fbcon always
> > set mode to text mode
> > 
> > If by some reason or tests, this tests is executed and VT mode is already in
> > KD_GRAPHICS the call to kmstest_set_vt_graphics_mode() will set orig_vt_mode
> > as KD_GRAPHICS and when it was calling
> > kmstest_restore_vt_mode() it would set KD_GRAPHICS again not returning to
> > fbcon and causing the test to fail.
> > 
> > As it can be seen here:
> > (kms_fbcon_fbt:11004) igt_kms-DEBUG: VT: graphics mode set (mode was 0x1)"
> > https://intel-gfx-ci.01.org/tree/drm-tip/drmtip_499/fi-ehl-
> > 1/igt@kms_fbcon_fbt@fbc.html
> > 
> > So here adding a new function to alaways set mode the KD_TEXT when we want
> > to restore to fbcon.
> > 
> > Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
> > ---
> >  lib/igt_kms.c         | 11 +++++++++++
> >  lib/igt_kms.h         |  1 +
> >  tests/kms_fbcon_fbt.c |  2 +-
> >  3 files changed, 13 insertions(+), 1 deletion(-)
> > 
> > diff --git a/lib/igt_kms.c b/lib/igt_kms.c index d4cbc1c53..afef59396 100644
> > --- a/lib/igt_kms.c
> > +++ b/lib/igt_kms.c
> > @@ -968,6 +968,17 @@ void kmstest_set_vt_graphics_mode(void)
> >  	igt_debug("VT: graphics mode set (mode was 0x%lx)\n", ret);  }
> > 
> > +/**
> > + * kmstest_set_vt_text_mode:
> > + *
> > + * Sets the controlling VT (if available) into text mode.
> > + * Unlikely kmstest_set_vt_graphics_mode() it do not install an igt
> > +exit
> > + * handler to set the VT back to the previous mode.
> > + */
> > +void kmstest_set_vt_text_mode(void)
> > +{
> > +	igt_assert(set_vt_mode(KD_TEXT) >= 0); }
> > 
> >  static void reset_connectors_at_exit(int sig)  { diff --git a/lib/igt_kms.h
> > b/lib/igt_kms.h index adca59ac6..32a0e4cc6 100644
> > --- a/lib/igt_kms.h
> > +++ b/lib/igt_kms.h
> > @@ -93,6 +93,7 @@ void kmstest_dump_mode(drmModeModeInfo *mode);  int
> > kmstest_get_pipe_from_crtc_id(int fd, int crtc_id);  void
> > kmstest_set_vt_graphics_mode(void);
> >  void kmstest_restore_vt_mode(void);
> > +void kmstest_set_vt_text_mode(void);
> > 
> >  enum igt_atomic_crtc_properties {
> >         IGT_CRTC_BACKGROUND = 0,
> > diff --git a/tests/kms_fbcon_fbt.c b/tests/kms_fbcon_fbt.c index
> > e6dd4353b..e99a1f2f2 100644
> > --- a/tests/kms_fbcon_fbt.c
> > +++ b/tests/kms_fbcon_fbt.c
> > @@ -283,7 +283,7 @@ static void restore_fbcon(struct drm_info *drm)
> >  	kmstest_unset_all_crtcs(drm->fd, drm->res);
> >  	igt_remove_fb(drm->fd, &drm->fb);
> >  	igt_device_drop_master(drm->fd);
> > -	kmstest_restore_vt_mode();
> > +	kmstest_set_vt_text_mode();
> 
> Can we level set the state to KD_TEXT in beginning only before we begin our test.
> This way test will start with the expected state, and we can then set KD_GRAPHICS,
> restore will ensure previous state is set again as KD_TEXT, and we can just continue with the
> existing restore logic. Will that cause any issue ?

We could be overwriting the previous state, KD_TEXT is the state we expect in our CI but it do not means that is the state that other users have prior
of executing this test, that is why kmstest_restore_vt_mode() don't just set to KD_TEXT.

> 
> Regards,
> Uma Shankar
> 
> >  }
> > 
> >  static void subtest(struct drm_info *drm, struct feature *feature, bool suspend)
> > --
> > 2.26.2
> > 
> > _______________________________________________
> > igt-dev mailing list
> > igt-dev@lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/igt-dev
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev