From: "Lisovskiy, Stanislav" <stanislav.lisovskiy@intel.com>
To: "igt-dev@lists.freedesktop.org" <igt-dev@lists.freedesktop.org>,
"Souza, Jose" <jose.souza@intel.com>
Cc: "Syrjala, Ville" <ville.syrjala@intel.com>,
"Peres, Martin" <martin.peres@intel.com>
Subject: Re: [igt-dev] [PATCH i-g-t v3 1/3] igt/tests/kms_atomic_transition: Skip transition, if no changes done
Date: Tue, 2 Apr 2019 06:59:28 +0000 [thread overview]
Message-ID: <59a9088f6f9c44b971896eacdff175b10fdda71b.camel@intel.com> (raw)
In-Reply-To: <1bfa445cb5c65076f2070d53248a412ee7f4108d.camel@intel.com>
On Mon, 2019-04-01 at 16:04 -0700, Souza, Jose wrote:
> On Mon, 2019-04-01 at 14:23 +0300, Stanislav Lisovskiy wrote:
> > While fixing used amount of planes, discovered that if
> > wm_setup_plane is called with 0 planes(might happen during
> > main testing cycle, as parms[i].mask can be 0 due to randomization)
>
> I can't see how parms[i].mask can be 0, it always be one of: 1 << (0,
> 1, 2 or 3).
>
You are right, it can't be zero. What happens is that we get
a such mask parameter that parms[i].mask & mask expression happens to
be 0 for all planes and then wait_for_transition asserts onfd_completed.
I also tried this manually, if I call wm_setup_plane with mask
parameter set as 0 and then wait_for_transition, I get this assert
constantly. So I guess checking that should not harm anyway.
> > then subsequent wait_transition fails in assertion on fd_completed.
> > So added return value to wm_setup_plane, which would allow to
> > determine, if we need to skip this step.
> >
> > Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
> > ---
> > tests/kms_atomic_transition.c | 23 +++++++++++++++++------
> > 1 file changed, 17 insertions(+), 6 deletions(-)
> >
> > diff --git a/tests/kms_atomic_transition.c
> > b/tests/kms_atomic_transition.c
> > index 18f73317..638fe17e 100644
> > --- a/tests/kms_atomic_transition.c
> > +++ b/tests/kms_atomic_transition.c
> > @@ -118,11 +118,12 @@ static void configure_fencing(igt_plane_t
> > *plane)
> > igt_assert_eq(ret, 0);
> > }
> >
> > -static void
> > +static int
> > wm_setup_plane(igt_display_t *display, enum pipe pipe,
> > uint32_t mask, struct plane_parms *parms, bool fencing)
> > {
> > igt_plane_t *plane;
> > + int planes_set_up = 0;
> >
> > /*
> > * Make sure these buffers are suited for display use
> > @@ -133,8 +134,10 @@ wm_setup_plane(igt_display_t *display, enum
> > pipe
> > pipe,
> > int i = plane->index;
> >
> > if (!mask || !(parms[i].mask & mask)) {
> > - if (plane->values[IGT_PLANE_FB_ID])
> > + if (plane->values[IGT_PLANE_FB_ID]) {
> > igt_plane_set_fb(plane, NULL);
> > + planes_set_up++;
> > + }
> > continue;
> > }
> >
> > @@ -144,7 +147,10 @@ wm_setup_plane(igt_display_t *display, enum
> > pipe
> > pipe,
> > igt_plane_set_fb(plane, parms[i].fb);
> > igt_fb_set_size(parms[i].fb, plane, parms[i].width,
> > parms[i].height);
> > igt_plane_set_size(plane, parms[i].width,
> > parms[i].height);
> > +
> > + planes_set_up++;
> > }
> > + return planes_set_up;
> > }
> >
> > static void ev_page_flip(int fd, unsigned seq, unsigned tv_sec,
> > unsigned tv_usec, void *user_data)
> > @@ -544,7 +550,8 @@ run_transition_test(igt_display_t *display,
> > enum
> > pipe pipe, igt_output_t *output
> >
> > igt_output_set_pipe(output, pipe);
> >
> > - wm_setup_plane(display, pipe, i, parms, fencing);
> > + if (!wm_setup_plane(display, pipe, i, parms, fencing))
> > + continue;
> >
> > atomic_commit(display, pipe, flags, (void *)(unsigned
> > long)i, fencing);
> > wait_for_transition(display, pipe, nonblocking,
> > fencing);
> > @@ -552,7 +559,8 @@ run_transition_test(igt_display_t *display,
> > enum
> > pipe pipe, igt_output_t *output
> > if (type == TRANSITION_MODESET_DISABLE) {
> > igt_output_set_pipe(output, PIPE_NONE);
> >
> > - wm_setup_plane(display, pipe, 0, parms,
> > fencing);
> > + if (!wm_setup_plane(display, pipe, 0, parms,
> > fencing))
> > + continue;
> >
> > atomic_commit(display, pipe, flags, (void *)
> > 0UL, fencing);
> > wait_for_transition(display, pipe, nonblocking,
> > fencing);
> > @@ -568,7 +576,8 @@ run_transition_test(igt_display_t *display,
> > enum
> > pipe pipe, igt_output_t *output
> > n_enable_planes < pipe_obj-
> > > n_planes)
> >
> > continue;
> >
> > - wm_setup_plane(display, pipe, j, parms,
> > fencing);
> > + if (!wm_setup_plane(display, pipe, j,
> > parms, fencing))
> > + continue;
> >
> > if (type >= TRANSITION_MODESET)
> > igt_output_override_mode(output
> > , &override_mode);
> > @@ -576,7 +585,9 @@ run_transition_test(igt_display_t *display,
> > enum
> > pipe pipe, igt_output_t *output
> > atomic_commit(display, pipe, flags,
> > (void *)(unsigned long) j, fencing);
> > wait_for_transition(display, pipe,
> > nonblocking, fencing);
> >
> > - wm_setup_plane(display, pipe, i, parms,
> > fencing);
> > + if (!wm_setup_plane(display, pipe, i,
> > parms, fencing))
> > + continue;
> > +
> > if (type >= TRANSITION_MODESET)
> > igt_output_override_mode(output
> > , NULL);
> >
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev
next prev parent reply other threads:[~2019-04-02 6:59 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-01 11:23 [igt-dev] [PATCH i-g-t v3 0/3] kms_atomic_transition improvements Stanislav Lisovskiy
2019-04-01 11:23 ` [igt-dev] [PATCH i-g-t v3 1/3] igt/tests/kms_atomic_transition: Skip transition, if no changes done Stanislav Lisovskiy
2019-04-01 23:04 ` Souza, Jose
2019-04-02 6:59 ` Lisovskiy, Stanislav [this message]
2019-04-01 11:23 ` [igt-dev] [PATCH i-g-t v3 2/3] igt/tests/kms_atomic_transition: Tolerate if can't have all planes Stanislav Lisovskiy
2019-04-02 20:42 ` Souza, Jose
2019-04-03 8:08 ` Lisovskiy, Stanislav
2019-04-01 11:23 ` [igt-dev] [PATCH i-g-t v3 3/3] igt/tests/kms_atomic_transition: Remove redundant code Stanislav Lisovskiy
2019-04-01 12:07 ` [igt-dev] ✗ Fi.CI.BAT: failure for kms_atomic_transition improvements (rev3) Patchwork
2019-04-01 13:42 ` [igt-dev] ✗ Fi.CI.BAT: failure for kms_atomic_transition improvements (rev4) Patchwork
2019-04-02 8:59 ` [igt-dev] ✓ Fi.CI.BAT: success for kms_atomic_transition improvements (rev5) Patchwork
2019-04-02 13:50 ` [igt-dev] ✓ Fi.CI.IGT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=59a9088f6f9c44b971896eacdff175b10fdda71b.camel@intel.com \
--to=stanislav.lisovskiy@intel.com \
--cc=igt-dev@lists.freedesktop.org \
--cc=jose.souza@intel.com \
--cc=martin.peres@intel.com \
--cc=ville.syrjala@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox