From: Mika Kuoppala <mika.kuoppala@linux.intel.com>
To: Chris Wilson <chris@chris-wilson.co.uk>, intel-gfx@lists.freedesktop.org
Cc: igt-dev@lists.freedesktop.org
Subject: Re: [Intel-gfx] [PATCH i-g-t 1/2] i915/gem_eio: Check average reset times
Date: Fri, 15 Feb 2019 16:40:30 +0200 [thread overview]
Message-ID: <87h8d5yv1d.fsf@gaia.fi.intel.com> (raw)
In-Reply-To: <20190212205740.20368-1-chris@chris-wilson.co.uk>
Chris Wilson <chris@chris-wilson.co.uk> writes:
> As we have moved to rcu/srcu to serialise the resets, individual resets
> are subject to small variations in system grace periods. Allow for this
> by only expecting the median reset time to be within our target, thereby
> excluding noisy outliers from perturbing our results (but keep the
> maximum capped to prevent horrid failures!)
>
> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
> ---
> tests/i915/gem_eio.c | 53 ++++++++++++++++++++++++++++++++++----------
> 1 file changed, 41 insertions(+), 12 deletions(-)
>
> diff --git a/tests/i915/gem_eio.c b/tests/i915/gem_eio.c
> index 61054a07e..bd5266104 100644
> --- a/tests/i915/gem_eio.c
> +++ b/tests/i915/gem_eio.c
> @@ -42,6 +42,7 @@
>
> #include "igt.h"
> #include "igt_device.h"
> +#include "igt_stats.h"
> #include "igt_sysfs.h"
> #include "sw_sync.h"
> #include "i915/gem_ring.h"
> @@ -239,10 +240,9 @@ static void hang_after(int fd, unsigned int us, struct timespec *ts)
> igt_assert_eq(timer_settime(ctx->timer, 0, &its, NULL), 0);
> }
>
> -static void check_wait(int fd, uint32_t bo, unsigned int wait)
> +static void check_wait(int fd, uint32_t bo, unsigned int wait, igt_stats_t *st)
> {
> struct timespec ts = {};
> - uint64_t elapsed;
>
> if (wait) {
> hang_after(fd, wait, &ts);
> @@ -253,10 +253,34 @@ static void check_wait(int fd, uint32_t bo, unsigned int wait)
>
> gem_sync(fd, bo);
>
> - elapsed = igt_nsec_elapsed(&ts);
> - igt_assert_f(elapsed < 250e6,
> - "Wake up following reset+wedge took %.3fms\n",
> - elapsed*1e-6);
> + if (st)
> + igt_stats_push(st, igt_nsec_elapsed(&ts));
You prolly want igt_nsec_elapsed() primed regardless
of wait, otherwise I see -1 pushed polluting the stats.
-Mika
> +}
> +
> +static void check_wait_elapsed(int fd, igt_stats_t *st)
> +{
> + double med, max;
> +
> + igt_info("Completed %d resets, wakeups took %.3f+-%.3fms (min:%.3fms, median:%.3fms, max:%.3fms)\n",
> + st->n_values,
> + igt_stats_get_mean(st)*1e-6,
> + igt_stats_get_std_deviation(st)*1e-6,
> + igt_stats_get_min(st)*1e-6,
> + igt_stats_get_median(st)*1e-6,
> + igt_stats_get_max(st)*1e-6);
> +
> + if (st->n_values < 9)
> + return; /* too few for stable median */
> +
> + med = igt_stats_get_median(st);
> + max = igt_stats_get_max(st);
> + igt_assert_f(med < 250e6 && max < 1250e6,
> + "Wake up following reset+wedge took %.3f+-%.3fms (min:%.3fms, median:%.3fms, max:%.3fms)\n",
> + igt_stats_get_mean(st)*1e-6,
> + igt_stats_get_std_deviation(st)*1e-6,
> + igt_stats_get_min(st)*1e-6,
> + igt_stats_get_median(st)*1e-6,
> + igt_stats_get_max(st)*1e-6);
> }
>
> static void __test_banned(int fd)
> @@ -326,7 +350,7 @@ static void test_wait(int fd, unsigned int flags, unsigned int wait)
>
> hang = spin_sync(fd, 0, I915_EXEC_DEFAULT);
>
> - check_wait(fd, hang->handle, wait);
> + check_wait(fd, hang->handle, wait, NULL);
>
> igt_spin_batch_free(fd, hang);
>
> @@ -401,7 +425,7 @@ static void test_inflight(int fd, unsigned int wait)
> igt_assert(fence[n] != -1);
> }
>
> - check_wait(fd, obj[1].handle, wait);
> + check_wait(fd, obj[1].handle, wait, NULL);
>
> for (unsigned int n = 0; n < max; n++) {
> igt_assert_eq(sync_fence_status(fence[n]), -EIO);
> @@ -457,7 +481,7 @@ static void test_inflight_suspend(int fd)
> igt_set_autoresume_delay(30);
> igt_system_suspend_autoresume(SUSPEND_STATE_MEM, SUSPEND_TEST_NONE);
>
> - check_wait(fd, obj[1].handle, 10);
> + check_wait(fd, obj[1].handle, 10, NULL);
>
> for (unsigned int n = 0; n < max; n++) {
> igt_assert_eq(sync_fence_status(fence[n]), -EIO);
> @@ -535,7 +559,7 @@ static void test_inflight_contexts(int fd, unsigned int wait)
> igt_assert(fence[n] != -1);
> }
>
> - check_wait(fd, obj[1].handle, wait);
> + check_wait(fd, obj[1].handle, wait, NULL);
>
> for (unsigned int n = 0; n < ARRAY_SIZE(fence); n++) {
> igt_assert_eq(sync_fence_status(fence[n]), -EIO);
> @@ -644,7 +668,7 @@ static void test_inflight_internal(int fd, unsigned int wait)
> nfence++;
> }
>
> - check_wait(fd, obj[1].handle, wait);
> + check_wait(fd, obj[1].handle, wait, NULL);
>
> while (nfence--) {
> igt_assert_eq(sync_fence_status(fences[nfence]), -EIO);
> @@ -670,8 +694,11 @@ static void reset_stress(int fd,
> .buffer_count = 1,
> .flags = engine,
> };
> + igt_stats_t stats;
> +
> gem_write(fd, obj.handle, 0, &bbe, sizeof(bbe));
>
> + igt_stats_init(&stats);
> igt_until_timeout(5) {
> uint32_t ctx = context_create_safe(fd);
> igt_spin_t *hang;
> @@ -697,7 +724,7 @@ static void reset_stress(int fd,
> gem_execbuf(fd, &execbuf);
>
> /* Wedge after a small delay. */
> - check_wait(fd, obj.handle, 100e3);
> + check_wait(fd, obj.handle, 100e3, &stats);
>
> /* Unwedge by forcing a reset. */
> igt_assert(i915_reset_control(true));
> @@ -721,6 +748,8 @@ static void reset_stress(int fd,
> igt_spin_batch_free(fd, hang);
> gem_context_destroy(fd, ctx);
> }
> + check_wait_elapsed(fd, &stats);
> + igt_stats_fini(&stats);
>
> gem_close(fd, obj.handle);
> }
> --
> 2.20.1
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2019-02-15 14:40 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-12 20:57 [igt-dev] [PATCH i-g-t 1/2] i915/gem_eio: Check average reset times Chris Wilson
2019-02-12 20:57 ` [igt-dev] [PATCH i-g-t 2/2] i915/gem_eio: Allow older platforms more leniency in reset latency Chris Wilson
2019-02-15 14:43 ` [Intel-gfx] " Mika Kuoppala
2019-02-12 21:22 ` [igt-dev] ✓ Fi.CI.BAT: success for series starting with [i-g-t,1/2] i915/gem_eio: Check average reset times Patchwork
2019-02-12 23:12 ` [igt-dev] ✓ Fi.CI.IGT: " Patchwork
2019-02-15 14:40 ` Mika Kuoppala [this message]
2019-02-15 14:52 ` [igt-dev] [Intel-gfx] [PATCH i-g-t 1/2] " Chris Wilson
2019-02-15 15:02 ` Mika Kuoppala via igt-dev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87h8d5yv1d.fsf@gaia.fi.intel.com \
--to=mika.kuoppala@linux.intel.com \
--cc=chris@chris-wilson.co.uk \
--cc=igt-dev@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox