From: Gustavo Sousa <gustavo.sousa@intel.com>
To: Marcin Bernatowicz <marcin.bernatowicz@linux.intel.com>,
<igt-dev@lists.freedesktop.org>
Cc: Kamil Konieczny <kamil.konieczny@linux.intel.com>,
Marcin Bernatowicz <marcin.bernatowicz@linux.intel.com>
Subject: Re: [PATCH v2 i-g-t 1/1] tests/intel/xe_pmu: Provision VFs inside dynamic subtests
Date: Tue, 13 Oct 2026 15:30:47 -0300 [thread overview]
Message-ID: <87jynla1wo.fsf@intel.com> (raw)
In-Reply-To: <5553bf027e3bdb9253a18fce5477a42ef10f0b25.1791900914.git.marcin.bernatowicz@linux.intel.com>
Marcin Bernatowicz <marcin.bernatowicz@linux.intel.com> writes:
> VF setup helpers can call igt_assert(), which is not allowed in the outer
> igt_subtest_with_dynamic() scope. Set up VFs in the first dynamic case,
> reuse them across engine cases, and clean up after the group. This keeps
> VF setup out of unrelated subtests.
>
> Assisted-by: Copilot:Claude-Opus-5
> Signed-off-by: Marcin Bernatowicz <marcin.bernatowicz@linux.intel.com>
> Cc: Gustavo Sousa <gustavo.sousa@intel.com>
> Cc: Kamil Konieczny <kamil.konieczny@linux.intel.com>
> Reviewed-by: Kamil Konieczny <kamil.konieczny@linux.intel.com>
> ---
> tests/intel/xe_pmu.c | 48 +++++++++++++++++++++++++++++++++-----------
> 1 file changed, 36 insertions(+), 12 deletions(-)
>
> diff --git a/tests/intel/xe_pmu.c b/tests/intel/xe_pmu.c
> index d41ebba1f..159a7f8a2 100644
> --- a/tests/intel/xe_pmu.c
> +++ b/tests/intel/xe_pmu.c
> @@ -117,6 +117,8 @@ static char xe_device[NAME_MAX];
> static bool autoprobe;
> static int total_exec_quantum;
> static bool has_engine_active_ticks;
> +static unsigned int num_functions;
I feel like num_functions as a name for a global variable is a bit too
generic for what its purpose is.
Maybe sriov_num_fns (or the longer sriov_num_functions).
And then, for consistency, sriov_vfs_setup_started?
Anyway, the patch looks good to me. Thanks for this!
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
> +static bool vfs_setup_started;
>
> #define test_each_engine(test, fd, hwe) \
> igt_subtest_with_dynamic(test) \
> @@ -999,6 +1001,7 @@ static unsigned int enable_and_provision_vfs(int fd)
> num_vfs = total_vfs > 2 ? 2 : total_vfs;
>
> /* Enable VF's */
> + vfs_setup_started = true;
> igt_sriov_disable_driver_autoprobe(fd);
> igt_sriov_enable_vfs(fd, num_vfs);
> igt_require(igt_sriov_get_enabled_vfs(fd) == num_vfs);
> @@ -1021,6 +1024,16 @@ static unsigned int enable_and_provision_vfs(int fd)
> return num_vfs;
> }
>
> +static void ensure_vfs_enabled(int fd)
> +{
> + if (num_functions)
> + return;
> +
> + igt_require_f(!vfs_setup_started,
> + "VF setup failed in an earlier dynamic subtest; see its log\n");
> + num_functions = enable_and_provision_vfs(fd) + 1;
> +}
> +
> static void unprovision_and_disable_vfs(int fd)
> {
> int ret;
> @@ -1039,6 +1052,16 @@ static void unprovision_and_disable_vfs(int fd)
> igt_sriov_clear_exit_handler();
> }
>
> +static void cleanup_vfs_setup(int fd)
> +{
> + if (!vfs_setup_started)
> + return;
> +
> + unprovision_and_disable_vfs(fd);
> + vfs_setup_started = false;
> + num_functions = 0;
> +}
> +
> static void stash_gt_freq(int fd, uint32_t **stash_min, uint32_t **stash_max)
> {
> int max_gt, gt;
> @@ -1190,28 +1213,29 @@ int igt_main()
> }
>
> igt_subtest_group() {
> - unsigned int num_fns;
> -
> - igt_fixture()
> - num_fns = enable_and_provision_vfs(fd) + 1;
> -
> igt_describe("Validate engine activity on all functions");
> - test_each_engine("all-fn-engine-activity-load", fd, eci)
> - engine_activity_all_fn(fd, eci, num_fns);
> + test_each_engine("all-fn-engine-activity-load", fd, eci) {
> + ensure_vfs_enabled(fd);
> + engine_activity_all_fn(fd, eci, num_functions);
> + }
>
> igt_describe("Validate per-function engine activity");
> - test_each_engine("fn-engine-activity-load", fd, eci)
> - for (int fn = 0; fn < num_fns; fn++)
> - engine_activity_fn(fd, eci, fn, XE_SRIOV_SCHED_PRIORITY_LOW);
> + test_each_engine("fn-engine-activity-load", fd, eci) {
> + ensure_vfs_enabled(fd);
> + for (int fn = 0; fn < num_functions; fn++)
> + engine_activity_fn(fd, eci, fn,
> + XE_SRIOV_SCHED_PRIORITY_LOW);
> + }
>
> igt_describe("Validate per-function engine activity when sched-if-idle is set");
> test_each_engine("fn-engine-activity-sched-if-idle", fd, eci) {
> - for (int fn = 0; fn < num_fns; fn++)
> + ensure_vfs_enabled(fd);
> + for (int fn = 0; fn < num_functions; fn++)
> engine_activity_fn(fd, eci, fn, XE_SRIOV_SCHED_PRIORITY_NORMAL);
> }
>
> igt_fixture()
> - unprovision_and_disable_vfs(fd);
> + cleanup_vfs_setup(fd);
> }
>
> igt_subtest_group() {
> --
> 2.43.0
next prev parent reply other threads:[~2026-10-13 18:32 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-13 14:36 [PATCH v2 i-g-t 0/1] xe_pmu: Do not enable VFs in unrelated subtests Marcin Bernatowicz
2026-10-13 14:36 ` [PATCH v2 i-g-t 1/1] tests/intel/xe_pmu: Provision VFs inside dynamic subtests Marcin Bernatowicz
2026-10-13 18:30 ` Gustavo Sousa [this message]
2026-10-13 17:46 ` ✓ i915.CI.BAT: success for xe_pmu: Do not enable VFs in unrelated subtests Patchwork
2026-10-13 22:04 ` ✓ Xe.CI.BAT: " Patchwork
2026-10-13 23:17 ` ✗ i915.CI.Full: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87jynla1wo.fsf@intel.com \
--to=gustavo.sousa@intel.com \
--cc=igt-dev@lists.freedesktop.org \
--cc=kamil.konieczny@linux.intel.com \
--cc=marcin.bernatowicz@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox