From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mga14.intel.com (mga14.intel.com [192.55.52.115]) by gabe.freedesktop.org (Postfix) with ESMTPS id 68B9489D4A for ; Wed, 20 Jan 2021 10:53:56 +0000 (UTC) Date: Wed, 20 Jan 2021 12:53:53 +0200 From: Ville =?iso-8859-1?Q?Syrj=E4l=E4?= Message-ID: References: <20210119141712.24980-1-bhanuprakash.modem@intel.com> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_vrr: Update condition checks for flipline test List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Errors-To: igt-dev-bounces@lists.freedesktop.org Sender: "igt-dev" To: "Modem, Bhanuprakash" Cc: "igt-dev@lists.freedesktop.org" List-ID: On Wed, Jan 20, 2021 at 05:36:59AM +0000, Modem, Bhanuprakash wrote: > > -----Original Message----- > > From: Ville Syrj=E4l=E4 > > Sent: Wednesday, January 20, 2021 12:46 AM > > To: Modem, Bhanuprakash > > Cc: igt-dev@lists.freedesktop.org > > Subject: Re: [igt-dev] [PATCH i-g-t] tests/kms_vrr: Update condition > > checks for flipline test > > = > > On Tue, Jan 19, 2021 at 07:47:12PM +0530, Bhanuprakash Modem wrote: > > > This patch includes below updates > > > * For Flipline test: if refresh_rate <=3D Vrr_min then > > > - Expected returned refresh rate would be vrr_max > > > - At least 35% of the flips should be in threshold > > > * Update "igt_display_commit_atomic" with "igt_display_commit2" > > > * Add few debug prints > > = > > Some ideas I had for a vrr test: > > - test flipping at a few different rates > > - make sure the interval between flip timestamps > > matches the expected rate > Actually, we are doing the same in our flipline[*] test. > = > Example: if we have a monitor with vrr range of 40 - 60Hz > We'll try to flip with 35, 50 and 65 Hz, and the difference between the > two flip timestamps should be within the required threshold from the > expected rate. A ~50us threshold is an arbitrary. > = > [*] https://patchwork.freedesktop.org/patch/392037 > = > > - otherwise confirm the timestamps are sensible. Not quite sure what the > > best way would be. One idea was to just make sure the timestamp points > > to more or less the correct point in time. Another idea was to drive > > the whole loop baed on the timestamps + target refresh rate (ie. wait > > for event, schedule next flip for event timestamps + whatever time we > > have left to reach the exected refresh rate). This latter idea I think > > would catch bugs where the interval between timestamps is correct but > > the absolute times are not correct (eg. if the timestamps are > > miscorrected to point fr into the future based on the max vblank > > length, or too close into the future based on min vblank length). > > - the busy loop thing I don't think should be needed. Sure, there is > > some wakeup latency due to C-states and whatnot, but it should be > > possible to compensate to make sure we reach the target refresh rate > > w/o spinning. > This part is not clear to me. > = > Ex. To generate the flips with refresh rate 50Hz (ie. 20000000ns), below > is the expected sequence: > = > * Request a flip & wait for flip completion event > * Capture the event timestamp to compare > * Wait 20000000ns for next flip That would anyway need a bit of correction to account for event delivery latency + whatever overhead we have in submitting the flip. But in addition I was suggesting that we calculate how long to wait based on the flip event timestamp + whatever extra is needed on top to reach the target frame rate. Thus if the timestamp is garbage the test should fail since we'll end up flipping at the wrong rate. > * Repeat > = > Am I missing something here? > = > > = > > > > > > V2: > > > * Rebase > > > > > > Cc: Manasi Navare > > > Cc: Nicholas Kazlauskas > > > Signed-off-by: Bhanuprakash Modem > > > --- > > > tests/kms_vrr.c | 51 ++++++++++++++++++++---------------------------= -- > > > 1 file changed, 21 insertions(+), 30 deletions(-) > > > > > > diff --git a/tests/kms_vrr.c b/tests/kms_vrr.c > > > index beb06854f..e6edd131f 100644 > > > --- a/tests/kms_vrr.c > > > +++ b/tests/kms_vrr.c > > > @@ -170,7 +170,7 @@ static void set_vrr_on_pipe(data_t *data, enum pi= pe > > pipe, bool enabled) > > > { > > > igt_pipe_set_prop_value(&data->display, pipe, IGT_CRTC_VRR_ENABLED, > > > enabled); > > > - igt_display_commit_atomic(&data->display, 0, NULL); > > > + igt_display_commit2(&data->display, COMMIT_ATOMIC); > > > } > > > > > > /* Prepare the display for testing on the given pipe. */ > > > @@ -208,8 +208,7 @@ static void prepare_test(data_t *data, igt_output= _t > > *output, enum pipe pipe) > > > */ > > > igt_pipe_set_prop_value(&data->display, pipe, IGT_CRTC_VRR_ENABLED, > > 0); > > > > > > - igt_display_commit_atomic(&data->display, > > > - DRM_MODE_ATOMIC_ALLOW_MODESET, NULL); > > > + igt_display_commit2(&data->display, COMMIT_ATOMIC); > > > } > > > > > > /* Waits for the vblank interval. Returns the vblank timestamp in ns. > > */ > > > @@ -291,14 +290,10 @@ flip_and_measure(data_t *data, igt_output_t > > *output, enum pipe pipe, > > > * difference between 144Hz and 143Hz which should give this > > > * enough accuracy for most use cases. > > > */ > > > - if (rate_ns <=3D vtest_ns.min && rate_ns >=3D vtest_ns.max) > > > + if ((rate_ns < vtest_ns.min) && (rate_ns >=3D vtest_ns.max)) > > > diff_ns =3D rate_ns; > > > - else if (rate_ns > vtest_ns.min) > > > - diff_ns =3D vtest_ns.min; > > > - else if (rate_ns < vtest_ns.max) > > > - diff_ns =3D vtest_ns.max; > > > else > > > - diff_ns =3D rate_ns; > > > + diff_ns =3D vtest_ns.max; > > > diff_ns -=3D event_ns - last_event_ns; > > > > > > if (llabs(diff_ns) < 50000ll) > > > @@ -323,8 +318,8 @@ flip_and_measure(data_t *data, igt_output_t *outp= ut, > > enum pipe pipe, > > > while (get_time_ns() < target_ns); > > > } > > > > > > - igt_info("Completed %u flips, %u were in threshold for > > %"PRIu64"ns.\n", > > > - total_flip, total_pass, rate_ns); > > > + igt_info("Completed %u flips, %u were in threshold for (%llu Hz) > > %"PRIu64"ns.\n", > > > + total_flip, total_pass, (NSECS_PER_SEC/rate_ns), rate_ns); > > > > > > return total_flip ? ((total_pass * 100) / total_flip) : 0; > > > } > > > @@ -338,8 +333,8 @@ test_basic(data_t *data, enum pipe pipe, > > igt_output_t *output, uint32_t flags) > > > range_t range =3D get_vrr_range(data, output); > > > uint64_t rate =3D vtest_ns.mid; > > > > > > - igt_info("VRR Test execution on %s, PIPE_%s\n", > > > - output->name, kmstest_pipe_name(pipe)); > > > + igt_info("VRR Test execution on %s, PIPE_%s with VRR range: (%u-%u) > > Hz\n", > > > + output->name, kmstest_pipe_name(pipe), range.min, range.max); > > > > > > prepare_test(data, output, pipe); > > > > > > @@ -370,46 +365,42 @@ test_basic(data_t *data, enum pipe pipe, > > igt_output_t *output, uint32_t flags) > > > * decision boundary. > > > * > > > * Example: if range is 40 - 60Hz and > > > - * if refresh_rate > 60Hz: > > > + * if refresh_rate > 60Hz or <=3D 40Hz: > > > * Flip should happen at the flipline boundary & returned > > refresh rate > > > * would be 60Hz. > > > * if refresh_rate is 50Hz: > > > * Flip will happen right away so returned refresh rate is > > 50Hz. > > > - * if refresh_rate < 40Hz: > > > - * Flip should happen at the vmax so the returned refresh rate > > > - * would be 40Hz. > > > */ > > > if (flags & TEST_FLIPLINE) { > > > - rate =3D rate_from_refresh(range.min - 5); > > > + rate =3D rate_from_refresh(range.max + 5); > > > result =3D flip_and_measure(data, output, pipe, rate, > > TEST_DURATION_NS); > > > igt_assert_f(result > 75, > > > - "Refresh rate %"PRIu64"ns: Target VRR on threshold > > not reached, result was %u%%\n", > > > - rate, result); > > > + "Refresh rate (%u Hz) %"PRIu64"ns: Target VRR on > > threshold not reached, result was %u%%\n", > > > + (range.max + 5), rate, result); > > > > > > - rate =3D rate_from_refresh(range.max + 5); > > > + rate =3D rate_from_refresh(range.min - 5); > > > result =3D flip_and_measure(data, output, pipe, rate, > > TEST_DURATION_NS); > > > - igt_assert_f(result > 75, > > > - "Refresh rate %"PRIu64"ns: Target VRR on threshold > > not reached, result was %u%%\n", > > > - rate, result); > > > + igt_assert_f(result > 35, > > > + "Refresh rate (%u Hz) %"PRIu64"ns: Target VRR on > > threshold not reached, result was %u%%\n", > > > + (range.min - 5), rate, result); > > > } > > > > > > rate =3D vtest_ns.mid; > > > result =3D flip_and_measure(data, output, pipe, rate, > > TEST_DURATION_NS); > > > igt_assert_f(result > 75, > > > - "Refresh rate %"PRIu64"ns: Target VRR on threshold not > > reached, result was %u%%\n", > > > - rate, result); > > > + "Refresh rate (%u Hz) %"PRIu64"ns: Target VRR on threshold > > not reached, result was %u%%\n", > > > + ((range.max + range.min) / 2), rate, result); > > > > > > set_vrr_on_pipe(data, pipe, 0); > > > result =3D flip_and_measure(data, output, pipe, rate, > > TEST_DURATION_NS); > > > igt_assert_f(result < 10, > > > - "Refresh rate %"PRIu64"ns: Target VRR off threshold > > exceeded, result was %u%%\n", > > > - rate, result); > > > + "Refresh rate (%u Hz) %"PRIu64"ns: Target VRR off > > threshold exceeded, result was %u%%\n", > > > + ((range.max + range.min) / 2), rate, result); > > > > > > /* Clean-up */ > > > igt_plane_set_fb(data->primary, NULL); > > > igt_output_set_pipe(output, PIPE_NONE); > > > - igt_display_commit_atomic(&data->display, > > > - DRM_MODE_ATOMIC_ALLOW_MODESET, NULL); > > > + igt_display_commit2(&data->display, COMMIT_ATOMIC); > > > > > > igt_remove_fb(data->drm_fd, &data->fb1); > > > igt_remove_fb(data->drm_fd, &data->fb0); > > > -- > > > 2.20.1 > > > > > > _______________________________________________ > > > igt-dev mailing list > > > igt-dev@lists.freedesktop.org > > > https://lists.freedesktop.org/mailman/listinfo/igt-dev > > = > > -- > > Ville Syrj=E4l=E4 > > Intel -- = Ville Syrj=E4l=E4 Intel _______________________________________________ igt-dev mailing list igt-dev@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/igt-dev