Igt-dev Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Francois Dugast <francois.dugast@intel.com>
To: "Zbigniew Kempczyński" <zbigniew.kempczynski@intel.com>
Cc: <igt-dev@lists.freedesktop.org>
Subject: Re: [PATCH i-g-t 09/15] lib/intel_blt: use struct instead of inline coding
Date: Thu, 22 May 2025 13:50:44 +0200	[thread overview]
Message-ID: <aC8PlOVDYYX2hwFy@fdugast-desk> (raw)
In-Reply-To: <20250513185811.897232-10-zbigniew.kempczynski@intel.com>

On Tue, May 13, 2025 at 08:58:04PM +0200, Zbigniew Kempczyński wrote:
> Structs with bitfields offers better control to avoid setting
> unnecessary bits and get unexpected behavior.
> 
> Add struct for mem-copy and replace current byte copy implementation
> to byte/page adding iterator for insert couple of mem-copy instructions
> if user passed objects which width is greater than limit.
> 
> On the first glance order of assigning fields might be weird, but
> this will be used in consecutive patch which extends copy from linear
> to matrix.
> 
> Signed-off-by: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com>
> Cc: Francois Dugast <francois.dugast@intel.com>

Much cleaner and matches the bspec:

Reviewed-by: Francois Dugast <francois.dugast@intel.com>

Francois

> ---
>  lib/intel_blt.c | 171 ++++++++++++++++++++++++++++++++++++++++--------
>  1 file changed, 144 insertions(+), 27 deletions(-)
> 
> diff --git a/lib/intel_blt.c b/lib/intel_blt.c
> index 04549ab42e..265f5ed50f 100644
> --- a/lib/intel_blt.c
> +++ b/lib/intel_blt.c
> @@ -1798,6 +1798,73 @@ int blt_fast_copy(int fd,
>  	return ret;
>  }
>  
> +struct xe_mem_copy_data {
> +	struct {
> +		uint32_t length:			BITRANGE(0, 7);
> +		uint32_t compression_format:	BITRANGE(8, 12);
> +		uint32_t compression_enable:	BITRANGE(13, 13);
> +		uint32_t rsvd0:			BITRANGE(14, 14);
> +		uint32_t dst_compressible:	BITRANGE(15, 15);
> +		uint32_t src_compressible:	BITRANGE(16, 16);
> +		uint32_t copy_type:		BITRANGE(17, 18);
> +		uint32_t mode:			BITRANGE(19, 19);
> +		uint32_t rsvd1:			BITRANGE(20, 21);
> +		uint32_t opcode:			BITRANGE(22, 28);
> +		uint32_t client:			BITRANGE(29, 31);
> +	} dw00;
> +
> +	struct {
> +		union {
> +			struct {
> +				uint32_t width:			BITRANGE(0, 17);
> +				uint32_t rsvd0:			BITRANGE(18, 31);
> +			} byte_copy;
> +			struct {
> +				uint32_t width:			BITRANGE(0, 23);
> +				uint32_t rsvd0:			BITRANGE(24, 31);
> +			} page_copy;
> +			uint32_t val;
> +		};
> +	} dw01;
> +
> +	struct {
> +		uint32_t height:			BITRANGE(0, 17);
> +		uint32_t rsvd0:			BITRANGE(18, 31);
> +	} dw02;
> +
> +	struct {
> +		uint32_t src_pitch:		BITRANGE(0, 17);
> +		uint32_t rsvd0:			BITRANGE(18, 31);
> +	} dw03;
> +
> +	struct {
> +		uint32_t dst_pitch:		BITRANGE(0, 17);
> +		uint32_t rsvd0:			BITRANGE(18, 31);
> +	} dw04;
> +
> +	struct {
> +		uint32_t src_address_lo;
> +	} dw05;
> +
> +	struct {
> +		uint32_t src_address_hi;
> +	} dw06;
> +
> +	struct {
> +		uint32_t dst_address_lo;
> +	} dw07;
> +
> +	struct {
> +		uint32_t dst_address_hi;
> +	} dw08;
> +
> +	struct {
> +		uint32_t dst_mocs:		BITRANGE(0, 6);
> +		uint32_t rsvd0:			BITRANGE(7, 24);
> +		uint32_t src_mocs:		BITRANGE(25, 31);
> +	} dw09;
> +};
> +
>  /**
>   * blt_mem_copy_init:
>   * @fd: drm fd
> @@ -1820,41 +1887,91 @@ void blt_mem_copy_init(int fd, struct blt_mem_copy_data *mem,
>  	mem->copy_type = copy_type;
>  }
>  
> -static void emit_blt_mem_copy(int fd, uint64_t ahnd,
> -			      const struct blt_mem_copy_data *mem,
> -			      bool emit_bbe)
> +static uint64_t emit_blt_mem_copy(int fd, uint64_t ahnd,
> +				  const struct blt_mem_copy_data *mem,
> +				  uint64_t bb_pos, bool emit_bbe)
>  {
> -	uint64_t dst_offset, src_offset;
> -	int i;
> -	uint32_t *batch;
> -	uint32_t optype;
> +	struct xe_mem_copy_data data = {};
> +	uint64_t dst_offset, src_offset, shift;
> +	uint32_t height, width_max, remain;
> +	uint32_t bbe = MI_BATCH_BUFFER_END;
> +	uint32_t *bb;
> +
> +	if (mem->mode == MODE_BYTE) {
> +		data.dw01.byte_copy.width = -1;
> +		width_max = data.dw01.byte_copy.width + 1;
> +		shift = width_max;
> +	} else {
> +		data.dw01.page_copy.width = -1;
> +		width_max = data.dw01.page_copy.width + 1;
> +		shift = width_max << 8;
> +	}
>  
>  	src_offset = get_offset_pat_index(ahnd, mem->src.handle, mem->src.size,
>  					  0, mem->src.pat_index);
>  	dst_offset = get_offset_pat_index(ahnd, mem->dst.handle, mem->dst.size,
>  					  0, mem->dst.pat_index);
>  
> -	batch = bo_map(fd, mem->bb.handle, mem->bb.size, mem->driver);
> -	optype = mem->copy_type == TYPE_MATRIX ? 1 << 17 : 0;
> -
> -	i = 0;
> -	batch[i++] = MEM_COPY_CMD | optype;
> -	batch[i++] = mem->src.width - 1;
> -	batch[i++] = mem->src.height - 1;
> -	batch[i++] = mem->src.pitch - 1;
> -	batch[i++] = mem->dst.pitch - 1;
> -	batch[i++] = src_offset;
> -	batch[i++] = src_offset << 32;
> -	batch[i++] = dst_offset;
> -	batch[i++] = dst_offset << 32;
> -	batch[i++] = mem->src.mocs_index << XE2_MEM_COPY_MOCS_SHIFT | mem->dst.mocs_index;
> -
> -	if (emit_bbe)
> -		batch[i++] = MI_BATCH_BUFFER_END;
> -
> -	munmap(batch, mem->bb.size);
> +	bb = bo_map(fd, mem->bb.handle, mem->bb.size, mem->driver);
> +
> +	height = mem->dst.height;
> +
> +	data.dw00.client = 0x2;
> +	data.dw00.opcode = 0x5a;
> +	data.dw00.length = 8;
> +	data.dw00.mode = mem->mode;
> +	data.dw00.copy_type = mem->copy_type;
> +
> +	data.dw02.height = height - 1;
> +	data.dw05.src_address_lo = src_offset;
> +	data.dw06.src_address_hi = src_offset >> 32;
> +	data.dw07.dst_address_lo = dst_offset;
> +	data.dw08.dst_address_hi = dst_offset >> 32;
> +	data.dw09.src_mocs = mem->src.mocs_index;
> +	data.dw09.dst_mocs = mem->dst.mocs_index;
> +
> +	remain = mem->src.width;
> +
> +	/* Truncate pitches to match operation bits */
> +	if (mem->src.pitch > width_max)
> +		data.dw03.src_pitch = width_max - 1;
> +	else
> +		data.dw03.src_pitch = mem->src.pitch;
> +
> +	if (mem->dst.pitch > width_max)
> +		data.dw04.dst_pitch = width_max - 1;
> +	else
> +		data.dw04.dst_pitch = mem->dst.pitch;
> +
> +	while (remain) {
> +		data.dw01.val = min_t(uint32_t, width_max, remain) - 1;
> +
> +		igt_assert(bb_pos + sizeof(data) < mem->bb.size);
> +		memcpy(bb + bb_pos, &data, sizeof(data));
> +		bb_pos += sizeof(data);
> +
> +		remain -= remain > width_max ? width_max : remain;
> +		src_offset += shift;
> +		dst_offset += shift;
> +
> +		data.dw05.src_address_lo = src_offset;
> +		data.dw06.src_address_hi = src_offset >> 32;
> +		data.dw07.dst_address_lo = dst_offset;
> +		data.dw08.dst_address_hi = dst_offset >> 32;
> +	}
> +
> +	if (emit_bbe) {
> +		igt_assert(bb_pos + sizeof(uint32_t) < mem->bb.size);
> +		memcpy(bb + bb_pos, &bbe, sizeof(bbe));
> +		bb_pos += sizeof(uint32_t);
> +	}
> +
> +	munmap(bb, mem->bb.size);
> +
> +	return bb_pos;
>  }
>  
> +
>  /**
>   * blt_mem_copy:
>   * @fd: drm fd
> @@ -1884,7 +2001,7 @@ int blt_mem_copy(int fd, const intel_ctx_t *ctx,
>  					  0, mem->dst.pat_index);
>  	bb_offset = get_offset(ahnd, mem->bb.handle, mem->bb.size, 0);
>  
> -	emit_blt_mem_copy(fd, ahnd, mem, true);
> +	emit_blt_mem_copy(fd, ahnd, mem, 0, true);
>  
>  	if (mem->driver == INTEL_DRIVER_XE) {
>  		intel_ctx_xe_exec(ctx, ahnd, CANONICAL(bb_offset));
> -- 
> 2.43.0
> 

  reply	other threads:[~2025-05-22 11:52 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-05-13 18:57 [PATCH i-g-t 00/15] Improve mem-copy/mem-set lib and tests Zbigniew Kempczyński
2025-05-13 18:57 ` [PATCH i-g-t 01/15] lib/xe_spin: limit width/pitch for mem-copy Zbigniew Kempczyński
2025-05-19  7:56   ` Francois Dugast
2025-05-13 18:57 ` [PATCH i-g-t 02/15] tests/xe_render_copy: change width and pitch to be in valid range Zbigniew Kempczyński
2025-05-19  7:56   ` Francois Dugast
2025-05-13 18:57 ` [PATCH i-g-t 03/15] tests/xe_spin_batch: " Zbigniew Kempczyński
2025-05-19  7:57   ` Francois Dugast
2025-05-13 18:57 ` [PATCH i-g-t 04/15] tests/xe_copy_basic: use non-zero pitch Zbigniew Kempczyński
2025-05-19  7:57   ` Francois Dugast
2025-05-13 18:58 ` [PATCH i-g-t 05/15] lib/intel_cmds_info: rename M to TYPE in blt_memop_type Zbigniew Kempczyński
2025-05-19  8:03   ` Francois Dugast
2025-05-19 11:17     ` Zbigniew Kempczyński
2025-05-22 11:31       ` Francois Dugast
2025-05-13 18:58 ` [PATCH i-g-t 06/15] lib/intel_blt: separate mem-copy and mem-set Zbigniew Kempczyński
2025-05-19  8:35   ` Francois Dugast
2025-05-13 18:58 ` [PATCH i-g-t 07/15] lib/intel_cmds_info: add blt_memop_mode (byte/page) Zbigniew Kempczyński
2025-05-19  8:54   ` Francois Dugast
2025-05-13 18:58 ` [PATCH i-g-t 08/15] lib/intel_blt: add emit batchbuffer end Zbigniew Kempczyński
2025-05-19  8:55   ` Francois Dugast
2025-05-13 18:58 ` [PATCH i-g-t 09/15] lib/intel_blt: use struct instead of inline coding Zbigniew Kempczyński
2025-05-22 11:50   ` Francois Dugast [this message]
2025-05-22 11:52   ` Francois Dugast
2025-05-13 18:58 ` [PATCH i-g-t 10/15] tests/xe_copy_basic: replace size to rect which keeps objects geometry Zbigniew Kempczyński
2025-05-22 12:05   ` Francois Dugast
2025-05-22 14:15     ` Zbigniew Kempczyński
2025-05-13 18:58 ` [PATCH i-g-t 11/15] tests/xe_copy_basic: add testcase with large buffer size Zbigniew Kempczyński
2025-05-13 18:58 ` [PATCH i-g-t 12/15] tests/xe_copy_basic: add subtest to verify mem-copy in pages Zbigniew Kempczyński
2025-05-13 18:58 ` [PATCH i-g-t 13/15] lib/intel_blt: add support for matrix mem-copy Zbigniew Kempczyński
2025-05-13 18:58 ` [PATCH i-g-t 14/15] tests/xe_copy_basic: add mem-copy matrix subtests Zbigniew Kempczyński
2025-05-13 18:58 ` [PATCH i-g-t 15/15] lib/intel_blt: add mem-copy debug facility Zbigniew Kempczyński
2025-05-13 20:26 ` ✓ Xe.CI.BAT: success for Improve mem-copy/mem-set lib and tests Patchwork
2025-05-13 20:44 ` ✓ i915.CI.BAT: " Patchwork
2025-05-13 22:01 ` ✗ Xe.CI.Full: failure " Patchwork
2025-05-14  5:04   ` Zbigniew Kempczyński
2025-05-13 23:12 ` ✗ i915.CI.Full: " Patchwork
2025-05-14  5:05   ` Zbigniew Kempczyński

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aC8PlOVDYYX2hwFy@fdugast-desk \
    --to=francois.dugast@intel.com \
    --cc=igt-dev@lists.freedesktop.org \
    --cc=zbigniew.kempczynski@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox