From: "Nilawar, Badal" <badal.nilawar@intel.com>
To: Anshuman Gupta <anshuman.gupta@intel.com>,
<igt-dev@lists.freedesktop.org>
Cc: rodrigo.vivi@intel.com
Subject: Re: [igt-dev] [PATCH i-g-t v3 1/5] lib/igt_pci: helpers to get PCI capabilities offset
Date: Tue, 29 Nov 2022 17:30:54 +0530 [thread overview]
Message-ID: <c04a4be3-b368-e4b0-0cee-4ae3497a88f9@intel.com> (raw)
In-Reply-To: <20221123085441.2821638-2-anshuman.gupta@intel.com>
Hi Anshuman,
On 23-11-2022 14:24, Anshuman Gupta wrote:
> Added helper functions to search for PCI capabilities
> with help of libpciaccess library.
>
> Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
> Co-developed-by: Marcin Bernatowicz <marcin.bernatowicz@linux.intel.com>
> Signed-off-by: Marcin Bernatowicz <marcin.bernatowicz@linux.intel.com>
> Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
> ---
> lib/igt_pci.c | 44 ++++++++++++++++++++++++++++++++++++++++++++
> lib/igt_pci.h | 32 ++++++++++++++++++++++++++++++++
> lib/meson.build | 1 +
> 3 files changed, 77 insertions(+)
> create mode 100644 lib/igt_pci.c
> create mode 100644 lib/igt_pci.h
>
> diff --git a/lib/igt_pci.c b/lib/igt_pci.c
> new file mode 100644
> index 0000000000..bc0369341d
> --- /dev/null
> +++ b/lib/igt_pci.c
> @@ -0,0 +1,44 @@
> +// SPDX-License-Identifier: MIT
> +/*
> + * Copyright © 2022 Intel Corporation
> + */
> +
> +#include <pciaccess.h>
> +#include "igt_pci.h"
> +
> +/**
> + * find_pci_cap_offset:
> + * @dev: pci device
> + * @cap_id: searched capability id, 0 means any capability
> + * @start_offset: offset in config space from which we start searching
> + *
> + * return:
> + * -1 on config read error, 0 if capability is not found,
> + * otherwise offset at which capability with cap_id is found
> + */
> +int find_pci_cap_offset_at(struct pci_device *dev, enum pci_cap_id cap_id,
> + int start_offset)
> +{
> + uint8_t offset;
> + uint16_t cap_header;
> + int loop = (PCI_CFG_SPACE_SIZE - PCI_TYPE0_1_HEADER_SIZE)
> + / sizeof(cap_header);
> +
> + if (pci_device_cfg_read_u8(dev, &offset, start_offset))
> + return -1;
> +
> + while (loop--) {
> + if (offset < PCI_TYPE0_1_HEADER_SIZE)
> + break;
> +
> + if (pci_device_cfg_read_u16(dev, &cap_header, (offset & 0xFC)))
> + return -1;
> +
> + if (!cap_id || cap_id == (cap_header & 0xFF))
> + return offset;
> +
> + offset = cap_header >> 8;
For the last capability, next capability address will always be 0. So
above instead of using while(loop--) we can use while(offset).
Regards,
Badal
> + }
> +
> + return 0;
> +}
> diff --git a/lib/igt_pci.h b/lib/igt_pci.h
> new file mode 100644
> index 0000000000..68afd2dacb
> --- /dev/null
> +++ b/lib/igt_pci.h
> @@ -0,0 +1,32 @@
> +// SPDX-License-Identifier: MIT
> +/*
> + * Copyright © 2022 Intel Corporation
> + */
> +
> +#ifndef __IGT_PCI_H__
> +#define __IGT_PCI_H__
> +
> +#include <stdint.h>
> +#include <endian.h>
> +
> +/* forward declaration */
> +struct pci_device;
> +
> +#define PCI_TYPE0_1_HEADER_SIZE 0x40
> +#define PCI_CAPS_START 0x34
> +#define PCI_CFG_SPACE_SIZE 0x100
> +#define PCIE_CFG_SPACE_SIZE 0x1000
> +
> +enum pci_cap_id {
> + PCI_EXPRESS_CAP_ID = 0x10
> +};
> +
> +int find_pci_cap_offset_at(struct pci_device *dev, enum pci_cap_id cap_id,
> + int start_offset);
> +
> +static inline int find_pci_cap_offset(struct pci_device *dev, enum pci_cap_id cap_id)
> +{
> + return find_pci_cap_offset_at(dev, cap_id, PCI_CAPS_START);
> +}
> +
> +#endif
> diff --git a/lib/meson.build b/lib/meson.build
> index cef2d0ff3d..e0fb7ddfed 100644
> --- a/lib/meson.build
> +++ b/lib/meson.build
> @@ -33,6 +33,7 @@ lib_sources = [
> 'igt_pipe_crc.c',
> 'igt_power.c',
> 'igt_primes.c',
> + 'igt_pci.c',
> 'igt_rand.c',
> 'igt_stats.c',
> 'igt_syncobj.c',
next prev parent reply other threads:[~2022-11-29 12:01 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-23 8:54 [igt-dev] [PATCH i-g-t v3 0/5] Cold Reset IGT Test Anshuman Gupta
2022-11-23 8:54 ` [igt-dev] [PATCH i-g-t v3 1/5] lib/igt_pci: helpers to get PCI capabilities offset Anshuman Gupta
2022-11-29 12:00 ` Nilawar, Badal [this message]
2022-11-30 12:43 ` Kamil Konieczny
2022-11-30 12:56 ` Nilawar, Badal
2022-12-07 17:27 ` Bernatowicz, Marcin
2022-12-07 16:58 ` Bernatowicz, Marcin
2022-11-23 8:54 ` [igt-dev] [PATCH i-g-t v3 2/5] lib/igt_pci: Add PCIe slot cap Anshuman Gupta
2022-11-29 14:43 ` Nilawar, Badal
2022-11-23 8:54 ` [igt-dev] [PATCH i-g-t v3 3/5] lib/igt_pm: Refactor get firmware_node fd Anshuman Gupta
2022-11-30 8:43 ` Kamil Konieczny
2022-11-30 8:46 ` Gupta, Anshuman
2022-11-23 8:54 ` [igt-dev] [PATCH i-g-t v3 4/5] test/device_reset: Refactor initiate_device_reset Anshuman Gupta
2022-11-23 8:54 ` [igt-dev] [PATCH i-g-t v3 5/5] tests/device_reset: Add cold reset IGT test Anshuman Gupta
2022-11-25 4:27 ` Iddamsetty, Aravind
2022-11-25 4:53 ` Gupta, Anshuman
2022-11-25 5:13 ` Iddamsetty, Aravind
2022-11-25 7:43 ` [igt-dev] [PATCH i-g-t v4 4/5] test/device_reset: Refactor initiate_device_reset Anshuman Gupta
2022-11-29 16:50 ` Nilawar, Badal
2022-11-30 13:29 ` Kamil Konieczny
2022-11-28 10:20 ` [igt-dev] [PATCH i-g-t v4 5/5] tests/device_reset: Add cold reset IGT test Anshuman Gupta
2022-11-30 13:09 ` Kamil Konieczny
2022-11-30 13:25 ` Nilawar, Badal
2022-12-07 8:38 ` Gupta, Anshuman
2022-11-23 9:45 ` [igt-dev] ✓ Fi.CI.BAT: success for Cold Reset IGT Test Patchwork
2022-11-25 8:25 ` [igt-dev] ✓ Fi.CI.BAT: success for Cold Reset IGT Test (rev2) Patchwork
2022-11-28 10:57 ` [igt-dev] ✓ Fi.CI.BAT: success for Cold Reset IGT Test (rev3) Patchwork
-- strict thread matches above, loose matches on Subject: below --
2022-11-23 8:52 [igt-dev] [PATCH i-g-t v3 0/5] Cold Reset IGT Test Anshuman Gupta
2022-11-23 8:52 ` [igt-dev] [PATCH i-g-t v3 1/5] lib/igt_pci: helpers to get PCI capabilities offset Anshuman Gupta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c04a4be3-b368-e4b0-0cee-4ae3497a88f9@intel.com \
--to=badal.nilawar@intel.com \
--cc=anshuman.gupta@intel.com \
--cc=igt-dev@lists.freedesktop.org \
--cc=rodrigo.vivi@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox